Chapter 8430 — Customs Tariff Headings

8430.20.00Snow-ploughs and snow-blowers

8430.3Coal or rock cutters and tunnelling machinery:

8430.4Other boring or sinking machinery:

8430.50.00Other machinery, self-propelled

8430.6Other machinery, not self-propelled:

Calculate exact duty for your shipment Not sure about classification? Ask the Tariff Assistant

Products classified under Tariff item 84.30

Diesel Hammer Pile Driver

A diesel-powered drop hammer pile driver that delivers high-impact blows to drive concrete or timber piles into soil for structural foundations. This machine is designed specifically for pile-driving operations, which is the principal function covered by tariff item 8430.10.00.

Drop Hammer Pile Driving Machine

A crane-suspended drop hammer system that raises and drops heavy weights to drive H-piles into the ground for marine piers and wharves. This equipment is explicitly a pile-driver under tariff item 8430.10.00, as its primary function is driving piles into earth or seabed.

Electric Pile Extractor

A battery-powered pile extractor with gripper jaws for removing utility and fencing piles in eco-friendly, emission-free operations. This machine is designed specifically for extracting piles, which is the principal function covered by tariff item 8430.10.00.

Hydraulic Pile Extractor Rig

A specialized rig with clamshell grabs and hydraulic rams to pull out old steel or concrete piles from construction sites during demolition or site preparation. It qualifies as a pile-extractor under tariff item 8430.10.00, as its primary function is extracting piles from the ground.

Marine Vibro Hammer Pile Driver

A waterproof vibratory hammer designed for underwater pile driving in coastal and offshore construction, handling corrosive marine environments. It is a pile-driver under tariff item 8430.10.00, as its primary function is driving piles into the seabed.

Pneumatic Pile Driver

An air-compressed hammer pile driver for driving small-diameter piles in sensitive urban areas with reduced noise compared to diesel models. This machine is classified under tariff item 8430.10.00 for its pile-driving function in earth boring operations.

Sheet Pile Press-In Machine

A quiet hydraulic press machine that incrementally pushes interlocking sheet piles into the ground for retaining walls and cofferdams. This machine is a pile-driver variant under tariff item 8430.10.00, as its primary function is driving piles into the earth.

Vibratory Hydraulic Pile Driver

A heavy-duty machine that uses hydraulic power and high-frequency vibrations to drive steel piles into the ground for foundation support in construction projects. It falls under tariff item 8430.10.00 as it is specifically designed for pile-driving operations.

Vibratory Pile Extractor

A machine employing eccentric weights and vibrations to loosen and extract driven piles from soil without damage, preserving them for reuse. This machine is a dedicated pile-extractor under tariff item 8430.10.00, as its primary function is extracting piles from the ground.

Ariens Compact 24 SHO Two-Stage Snowblower

A compact two-stage snowblower with a 24-inch clearing width, featuring accelerator controls for variable discharge distance. It is classified under this tariff item as a snow-blower for removing snow from driveways and walkways.

Ariens Deluxe 28-inch Two-Stage Snowblower

A walk-behind two-stage snowblower powered by a 250cc engine, featuring dual augers for snow collection and an impeller for throwing snow up to 50 feet. This self-propelled machine is designed for clearing snow from driveways and walkways, and falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Ariens Deluxe 28 Snowblower

A 28-inch two-stage snowblower with power steering and electric start, ideal for heavy snowfall. It is classified under this tariff item as a snow-blower for suburban snow removal.

Bobcat 78-Inch Snowblower Attachment S78

A 78-inch hydraulic snowblower attachment for compact track loaders, with a hardened steel auger and chute rotation. This attachment falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Boss V-Plow LT1500 Steel Snowplow

A V-shaped steel snowplow with independent hydraulic wings for directional plowing and containment, designed for commercial snow removal from roads and lots. This implement is mounted on a vehicle and falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Cub Cadet 2X 26 IntelliPower Snowblower

A two-stage snowblower with IntelliPower technology, a 26-inch width, and electric start, designed for heavy snow. It falls under this tariff item as a snow-blower for clearing snow from residential surfaces.

Cub Cadet 3X 30-inch Heavy Duty Snowblower

A three-stage snowblower with an accelerator auger between primary augers and an impeller, designed for superior handling of wet and heavy snow. This walk-behind machine is powered by a 357cc engine and falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Fisher Engineering Minute Mount 2 Snowplow

A quick-attach snowplow system for pickup trucks, featuring a 7'6" blade, hydraulic wing, and moldboard cutting edges for scraping and piling snow. This vehicle-mounted implement falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Frontier SB11 Series 110-Inch Snowblower Attachment

A 110-inch snowblower attachment for John Deere tractors, using an Xtreme duty auger for commercial snow removal. This attachment falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Honda HSS928AWD Three-Stage Snowblower

An all-wheel-drive three-stage snowblower with a track system for superior traction in deep snow. It is classified under this tariff item as a snow-blower for heavy-duty snow clearing.

Honda HSS928 Snowblower

A track-driven two-stage snowblower with a 28-inch width and hydrostatic transmission for steep driveways. It falls under this tariff item as a snow-blower for challenging terrain.

Honda HSS928 Two-Stage Track Snowblower

A crawler track snowblower with hydrostatic transmission for steep terrain, featuring a 28-inch clearing width and dual augers with an impeller. This self-propelled machine handles deep drifts and falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Husqvarna ST224 Snowblower

A two-stage 24-inch snowblower with heated handles and power steering for residential use. It is classified under this tariff item as a snow-blower for cold climates.

Husqvarna ST224 Two-Stage Snow Thrower

A compact two-stage snowblower with a 24-inch clearing width, electric start, and power steering for maneuverability in deep snow. This walk-behind machine uses an auger-impeller system and falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

John Deere 47-Inch Two-Stage Snow Blower Attachment

A front-mount two-stage snow blower attachment for John Deere tractors, designed for clearing large areas. It is classified under this tariff item as a snow-blower attachment for snow removal.

John Deere 484 Snowblower

A compact walk-behind two-stage snowblower with an 18-inch clearing width and gas-powered engine for residential use. It falls under this tariff item as a snow-blower for small driveways.

John Deere 54-inch Snow Blower Attachment

A tractor-mounted snow blower attachment with an auger system and impeller to collect and discharge snow, designed for clearing driveways and paths. This attachment falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

John Deere 59-Inch Snow Blower Attachment

A front-mount snow blower attachment for John Deere compact tractors, featuring a 59-inch clearing width and an auger system for efficient snow throwing. This attachment falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Kubota SB1088 Side-Discharge Snow Blower Attachment

A tractor front-mount snowblower with an 88-inch width and side-discharge chute for heavy snow clearing. This attachment falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Land Pride 66-Inch Snowblower Attachment FDR1686

A front-mount 66-inch snowblower for compact tractors, featuring a rotary impeller and hydraulic chute. This attachment falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Massey Ferguson 72-Inch Two-Stage Snowblower Attachment

A two-stage snowblower attachment designed for Massey Ferguson tractors, with a 72-inch clearing width, dual augers, and an impeller to handle deep snow. It is classified under this tariff item as snow-moving machinery for clearing snow from surfaces.

Meyer Home Plow 7'6" Straight Blade Snowplow

A residential pickup truck snowplow with EZ-V power angle and stainless cutting edges for driveway clearing. This basic scraping and pushing implement falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Patriot XLT 1050 Extended-Life Snowblower

A commercial-grade two-stage snowblower with a 30-inch clearing width and extended impeller life for frequent use. It is classified under this tariff item as a snow-blower for professional snow removal.

Snow Joe 24V-X2 IONHD Snowblower

A cordless battery-powered two-stage snowblower with a 21-inch width for urban sidewalks. It is classified under this tariff item as a snow-blower, regardless of power source.

Toro Power Clear 721 R-C Single-Stage Snowblower

A lightweight single-stage snowblower with a personal pace system and curved paddle for efficient light-to-medium snow clearing. This walk-behind machine uses an auger-based mechanism and falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Toro Power Clear 721 R-Two Stage Snowblower

A two-stage snowblower with an auger and impeller to throw snow up to 40 feet, designed for driveways and sidewalks. It falls under this tariff item as a snow-blower for residential snow clearing.

Toro Power Clear 721 R-Z Snowblower

A single-stage snowblower with a 21-inch width and OHV engine, optimized for light to medium snow. It falls under this tariff item as a snow-blower for compact, non-vehicular snow clearing.

Western Pro HTS Snowplow with Poly Moldboard

A heavy-duty highway truck snowplow featuring a polyethylene moldboard for corrosion resistance and hydraulic lift/scrape functions. This vehicle-mounted implement falls under tariff item 8430.20.00 as snow-ploughs and snow-blowers.

Alimak Hek MPS 1510 Mining Personnel Carrier

The Alimak MPS 1510 is a self-propelled mining personnel carrier equipped with auxiliary rock scaling tools for tunnel safety. It is designed for underground use, combining transport with scaling functions to enhance tunnel stability. This machine falls under tariff item 8430.31.00 as self-propelled tunnelling machinery for coal or rock cutting and extraction.

Atlas Copco Boltec M

The Atlas Copco Boltec M is a self-propelled bolting rig used for rock reinforcement in tunnels and underground mines. It features a rock drilling mechanism to install bolts, ensuring tunnel stability. This machine is classified under tariff item 8430.31.00 as self-propelled tunnelling machinery for rock cutting and extraction.

Atlas Copco Boomer S2D Rock Drill Rig

The Atlas Copco Boomer S2D is a self-propelled face drilling rig for underground tunnelling and mining, featuring electro-hydraulic booms for rock cutting and drilling. It is designed to drill blast holes in tunnel faces, contributing to rock extraction. This machine falls under tariff item 8430.31.00 as self-propelled tunnelling machinery for rock cutting.

Caterpillar D9T Dozer-Mounted Rock Breaker

A hydraulic rock breaker attachment designed for mounting on Caterpillar D9T bulldozers, used in mining and construction for breaking large rock formations and boulders. This self-propelled machinery falls under tariff item 8430.31.00 as it is a self-propelled coal or rock cutter and tunnelling machine.

Caterpillar R2900 XE LHD

The Caterpillar R2900 XE is a self-propelled diesel-electric LHD (Load-Haul-Dump) machine with a bucket for rock loading in tunnelling and mining operations. It is designed for underground mineral extraction, providing high breakout force for handling rock. This machine is classified under tariff item 8430.31.00 as self-propelled machinery for mineral extraction in tunnelling.

Epiroc Rhino 21SL Scaler

The Epiroc Rhino 21SL is a self-propelled scaler boom designed for rock scaling in tunnels, removing loose rock from tunnel walls and roofs. It enhances safety in underground mining and tunnelling operations. This machine falls under tariff item 8430.31.00 as self-propelled tunnelling machinery for rock cutting and extraction.

Epiroc ST18 Scooptram

The Epiroc ST18 Scooptram is a self-propelled Load-Haul-Dump (LHD) machine with integrated rock cutting for underground tunnelling and mineral extraction. It is designed to load and transport rock in tunnels, with a battery-powered or diesel engine. This machine is classified under tariff item 8430.31.00 as self-propelled tunnelling machinery.

Getman E4000 XP Electrically Powered Scaler

The Getman E4000 XP is a self-propelled electrically powered scaler used for rock surface preparation in tunnels, removing loose rock to ensure safety. It is designed for underground mining and tunnelling environments. This machine falls under tariff item 8430.31.00 as self-propelled tunnelling machinery for rock cutting.

Hydraulic Breaker HB 9000 on Excavator Carrier

The HB 9000 is a heavy-duty hydraulic rock breaker mounted on a self-propelled excavator carrier for breaking hard rock in quarries and open-pit mines. The complete unit functions as self-propelled rock cutting machinery, classified under tariff item 8430.31.00.

Joy Global 12CM27 Continuous Miner

The Joy Global 12CM27 is a self-propelled continuous mining machine for underground coal extraction, featuring a rotating cutter head and gathering arms. It is designed to cut coal from the face and load it onto conveyors. This machine is classified under tariff item 8430.31.00 as self-propelled coal cutting machinery.

Jumbo Drill Rig Sandvik DD2411

The Sandvik DD2411 is a self-propelled jumbo drill rig used for tunnel drilling and rock cutting in underground mining. It features multiple booms for drilling blast holes in tunnel faces. This machine is classified under tariff item 8430.31.00 as self-propelled tunnelling machinery.

Komatsu D155W Dozer with Ripper

The Komatsu D155W is a self-propelled bulldozer equipped with a ripper for rock breaking in mining and tunnelling preparation. It is used to rip and break rock for excavation, contributing to earth and mineral extraction. This machine falls under tariff item 8430.31.00 as self-propelled machinery for earth and minerals extraction.

Montabert V1200 Rock Breaker Rig

Montabert V1200 is a self-propelled tracked rig equipped with a high-impact rock breaker for demolition and quarry rock fragmentation. Its self-propelled design for on-site rock breaking qualifies it under tariff item 8430.31.00 as self-propelled rock cutting machinery.

Normet Charmec MC 605D Grout Machine

The Normet Charmec MC 605D is a self-propelled carrier with rock cutting and grouting capabilities for tunnel stabilization. It is designed for underground use, combining drilling and grouting functions to reinforce tunnels. This machine is classified under tariff item 8430.31.00 as self-propelled tunnelling machinery.

Normet Spramix 2K Concrete Sprayer

The Normet Spramix 2K is a self-propelled shotcrete machine with rock stabilization cutting capabilities, used for applying concrete to tunnel surfaces. It is designed for underground tunnelling and mining, enhancing tunnel stability. This machine falls under tariff item 8430.31.00 as self-propelled tunnelling machinery.

Sandvik DD421 Development Drill

The Sandvik DD421 is a self-propelled development drill for tunnel advance, designed for drilling blast holes in underground mining and tunnelling. It is equipped with multiple booms for efficient rock drilling. This machine falls under tariff item 8430.31.00 as self-propelled tunnelling machinery.

Sandvik HB 2000 Self-Propelled Rock Breaker

Sandvik HB 2000 hydraulic breaker integrated with a tracked self-propelled base for primary rock breaking in underground mining operations. It qualifies for tariff item 8430.31.00 as self-propelled machinery specifically designed for rock cutting and tunnelling.

Sandvik MT520 Roadheader

The Sandvik MT520 is a self-propelled roadheader designed for tunnelling and underground mining, equipped with a cutting head for coal and rock excavation. It is used to cut and load material in tunnels, contributing to mineral extraction. This machine is classified under tariff item 8430.31.00 as self-propelled tunnelling machinery.

Sandvik Toro LH517i

The Sandvik Toro LH517i is a self-propelled LHD (Load-Haul-Dump) machine for underground rock handling and light cutting support in tunnelling and mining. It is designed to load and transport rock, with an intelligent control system. This machine falls under tariff item 8430.31.00 as self-propelled machinery for mineral extraction in tunnels.