Other
Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap. > Cadmium: > Other > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 8112.6
Cadmium Battery Scrap
Discarded nickel-cadmium (NiCd) rechargeable batteries that have been removed from devices and are no longer usable. The material contains cadmium metal and alloys, and is classified as cadmium waste and scrap because cadmium is the primary metal component recovered.
8112.61.00Cadmium Plating Waste Scrap
Scrap material from cadmium electroplating operations, including spent anodes and cadmium-rich precipitates from rinse water treatment. This material is cadmium waste and scrap because it consists of metallic cadmium that is no longer usable in its original form.
8112.61.00Cadmium Stabilizer Waste from PVC
Residues and scrap from the production of cadmium-based heat stabilizers used in PVC plastics, appearing as metallic flakes or powder. These materials are cadmium waste and scrap because they are by-products of manufacturing that cannot be used as finished stabilizers.
8112.61.00Industrial Cadmium Rod Waste
Discarded cadmium rods from industrial applications such as pigments or stabilizers, recovered as turnings, offcuts, or other scrap forms. The material is cadmium waste and scrap because it is no longer usable as rods and is destined for recycling or disposal.
8112.61.00NiCd Cell Scrap from Electronics
Shredded scrap from nickel-cadmium cells found in cordless tools and cameras, processed to isolate the cadmium fraction. The material is cadmium waste and scrap because it consists of recovered cadmium metal that is no longer part of a functional battery.
8112.69.00Atomized Cadmium Powder
Atomized cadmium powder is produced by gas atomization of molten cadmium, resulting in fine, spherical particles. It is an unwrought form of cadmium, not yet fabricated into articles, and is used for physical vapor deposition (PVD) applications.
8112.69.00Cadmium Alloy Wire
Cadmium alloy wire is a thin wire made primarily of cadmium alloyed with small amounts of other metals. It is used in aerospace bearings and electrical contacts, and is classified as an article of cadmium rather than unwrought material.
8112.69.00Cadmium Dust Technical Grade
Cadmium dust technical grade is a coarse powder obtained by mechanical attrition of cadmium metal. It is an unwrought form, not further processed into articles, and is used for industrial alloying applications.
8112.69.00Cadmium Evaporation Boat
Cadmium evaporation boat is a small ceramic or metal boat-shaped crucible containing cadmium for thermal evaporation in vacuum coating systems. It is an article of cadmium used in optical and solar cell production.
8112.69.00Cadmium Foil Sheet
Cadmium foil sheet is ultra-thin rolled cadmium foil (0.01-0.1mm) used for battery separators and shielding applications. It is a fabricated cadmium article providing barrier properties in nuclear and energy storage technologies.
8112.69.00Cadmium Granules for Alloying
Cadmium granules for alloying are granular unwrought cadmium pieces designed for easy dissolution in molten metal alloys. They are commonly added to solders and bearing metals, and are not yet fabricated into articles.
8112.69.00Cadmium Master Alloy Ingot
Cadmium master alloy ingot is a compact ingot of cadmium alloy used as a master alloy for grain refining in lead-acid battery production. It is classified as an article of cadmium, not pure unwrought metal, and improves battery plate microstructure.
8112.69.00Cadmium Metal Chips
Cadmium metal chips are machined from cadmium block castings and remain in an unwrought state as they are not further processed into articles. They are used as granular alloy feeds in industrial applications.
8112.69.00Cadmium Pigment Precursor Pellet
Cadmium pigment precursor pellet is a pressed cadmium pellet used as a precursor for high-temperature synthesis of cadmium selenide pigments. It is classified as an article of cadmium for colorant production in ceramics and glass.
8112.69.00Cadmium Plating Anode
Cadmium plating anode is a soluble cadmium anode bar used for electroplating baths, providing sacrificial corrosion protection on steel parts. It is an article of cadmium used in industrial plating applications.
8112.69.00Cadmium Powder 99.99% Pure
Cadmium powder with 99.99% purity is a high-purity unwrought form used in powder metallurgy and electronics manufacturing. It is not formed into articles or shapes, remaining in a basic powder state.
8112.69.00Cadmium Reference Electrode
A laboratory reference electrode with a cadmium rod or wire immersed in an electrolyte, used to provide a stable potential for electrochemical measurements such as pH testing and corrosion analysis. It is classified as an article of cadmium under tariff item 8112.69.00 because it is a finished product of cadmium, not a raw or semi-finished form.
8112.69.00Cadmium Shot
Cadmium shot consists of small spherical pellets of pure cadmium metal, produced in an unprocessed form suitable for remelting. It is classified as unwrought cadmium and is used primarily in metal alloy production.
8112.69.00Cadmium Sputtering Target
A high-purity disc or plate of cadmium used as a sputtering target in physical vapor deposition to create thin films in electronics. It is classified as an article of cadmium under 8112.69.00 because it has been shaped and finished for a specific industrial use, going beyond a simple unwrought or semi-finished form.
8112.69.00Cadmium Thin Film Sensor
A ceramic substrate with a pre-deposited cadmium thin film, functioning as a gas or temperature sensor in industrial monitoring systems. It is classified as an article of cadmium under 8112.69.00 because the cadmium film is the essential element, and the product is a finished article of cadmium, not a raw material.
8112.69.00High-Purity Cadmium Flakes
High-purity cadmium flakes are thin flakes produced by atomization, used in thin-film deposition for semiconductors. They are an unwrought powder form of cadmium, exceeding 99.9% purity.
8112.69.00High-Purity Cadmium Shot
Spherical cadmium shot with 99.999% purity, used as a vapor deposition source or for precise alloying additions in high-tech manufacturing. It is classified as an article of cadmium under 8112.69.00 because the spherical form is precision-formed for a specific application, distinguishing it from simple granules or powders.
8112.69.00Unwrought Cadmium Ingots
Unwrought cadmium ingots are cast blocks of pure cadmium in an unwrought form, ready for remelting into alloys or further processing. They are not specially shaped or machined, making them suitable for various industrial uses.
8112.69.00Virgin Cadmium Bars Unwrought
Virgin cadmium bars are rectangular unwrought bars of electrolytic cadmium, sourced from zinc smelter byproducts. They are intended for remelting and are not profiled or machined, maintaining their unwrought status.