Unalloyed Tin Sheet 0.5mm Thick
Flat rolled tin sheet, 0.5 mm thick, made from unalloyed tin with 99.5% purity, used for corrosion-resistant lining in chemical equipment. This exceeds the 0.2 mm thickness threshold and is not a powder or flake.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is not in powder or flake form
Tin plates and sheets of thickness exceeding 0.2 mm are classified under 8007.00.20.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the tin purity is at least 99% and the thickness exceeds 0.2 mm
• If the product is a solid sheet, it should be classified under 8007.00.20
• Keep a certificate of analysis for purity
Related Products under Tariff item 8007.00.30
Corrugated Tin Roofing Sheet 1.2mm Thick
Corrugated tin roofing sheet, 1.2 mm thick, made from unalloyed tin for durable roofing in harsh climates due to high corrosion resistance. The corrugation does not alter its classification as a flat-rolled product, and it exceeds the 0.2 mm thickness threshold.
Polished Tin Plate for Decorative Panels 0.6mm
Bright-polished tin plate, 0.6 mm thick, for architectural decorative panels and signs. The surface treatment does not change its classification as a flat-rolled product, and it exceeds the 0.2 mm thickness threshold.
Rectangular Tin Plate Stock 0.9mm x 1m
Rectangular unalloyed tin plates, 0.9 mm thick, cut to 1m x 0.5m for stamping into seals. These are flat-rolled products exceeding 0.2 mm thickness, not powders or flakes.
Tin Alloy Transition Sheet 0.4mm (Near Alloy Limit)
Tin alloy transition sheet, 0.4 mm thick, with 0.39% copper, borderline unalloyed for flexible packaging liners. If certified under the subheading note limits, it may be treated as unalloyed tin, but it is a sheet, not powder or flake.
Tin Plate for Solder Manufacturing 0.8mm
Rolled tin plate sheet, 0.8 mm thick, unalloyed tin grade for melting into soldering foils and wires. This is a flat-rolled product exceeding 0.2 mm, not a powder or flake.
Tin Sheet for Battery Anodes 1.0mm
High-purity tin sheet, 1.0 mm thick, cut for lithium battery anode substrates. This is a flat-rolled product exceeding 0.2 mm thickness, not a powder or flake.