Zamac 8 Zinc Alloy Anode Ingots
Zamac 8 ingots are unwrought zinc-based alloy castings used for sacrificial anodes in cathodic protection systems, particularly for marine and offshore structures. Zinc is the predominant metal, and the alloying elements exceed 2.5%, qualifying them as zinc alloys under chapter 79.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the zinc content is 97.5% or more and alloying elements are within limits
Unalloyed zinc is classified separately.
If the ingots are defective or off-spec and sold for recycling
Zinc waste and scrap is classified in heading 79.02.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the ingots are unwrought and not fabricated into finished anodes
• Provide the alloy composition to support classification
• Check if the goods are subject to any environmental or safety regulations
Related Products under Tariff item 7901.20.00
ACuZinc 5 Zinc Alloy Pig
ACuZinc 5 pigs are unwrought castings of a zinc-copper-aluminum alloy, with zinc as the predominant metal by weight. They are used as feedstock for die casting and meet the chapter definition of a zinc alloy since the total content of other elements exceeds 2.5%.
AlZamax Zinc Alloy Billet Stock
AlZamax billets are unwrought zinc alloy stock designed for hot-chamber die casting, with zinc as the predominant metal and low iron content. They are used to produce decorative hardware and meet the definition of a zinc alloy under chapter 79.
CDA 779 Zinc Alloy Ingots
CDA 779 ingots are unwrought zinc-aluminum-copper alloy castings conforming to Copper Development Association specifications. Zinc predominates by weight, and the total alloying elements exceed 2.5%, qualifying them as zinc alloys under chapter 79.
EZAC3 Zinc Alloy Casting Ingots
EZAC3 ingots are unwrought zinc-aluminum-copper alloy castings used for thin-walled pressure die castings, particularly in telecommunications housings. Zinc is the predominant metal, and the alloying elements exceed 2.5% by weight, meeting the chapter 79 definition of zinc alloys.
Kirksite Zinc Alloy Sheet Stock
Kirksite is a zinc-lead-copper alloy supplied in unwrought sheet stock form for tooling and stretch forming dies. Zinc predominates by weight over other elements, and the alloying content exceeds 2.5%, qualifying it as a zinc alloy under chapter 79.
Marine Grade Zinc Alloy Blocks
Marine grade zinc alloy blocks are unwrought castings optimized for use as seawater anodes in cathodic protection systems. Zinc is the predominant metal, and the alloying elements exceed 2.5%, meeting the definition of a zinc alloy under chapter 79.