HVAC Fin Stock Aluminum Foil
Aluminum foil coils, 0.08 mm thick, for heat exchanger fins in air conditioners. Unbacked and under 0.2 mm, it is classified under 7607.19.00 as 'other' not-backed foil, with high conductivity for fin forming.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACAluminumRequired
- GAC
Aluminum · Required
Global Affairs Canada: GAC Aluminum (Aluminum Products) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Equal To 7607190000).
CBSA Single Window matching criteria, unknown
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coils weigh more than 0.021 g per square metre
Rolled foil exceeding this weight is classified under the rolled not-backed subheading.
If the foil has a hydrophilic coating for condensation management
Coated foil is considered backed and falls under the backed foil tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide technical data sheets showing the foil's electrical conductivity and thickness to support classification
• Confirm the foil is unbacked and not coated with a corrosion inhibitor, as coatings may change the tariff item
• Keep records of the intended use in HVAC manufacturing for CBSA verification
Related Products under Tariff item 7607.19.00
99.99% Pure Etched Foil for Audio Capacitors
> Ultra-pure etched aluminum foil (99.99% Al) tailored for high-fidelity audio electrolytic capacitors, providing low ESR through precise etching control. It is unbacked, not exceeding 0.2 mm in thickness, and falls under tariff item 7607.19.00 as other aluminum foil.
Aerospace Etched Foil for Avionics Capacitors
> MIL-spec etched aluminum foil for capacitors in avionics and flight control systems, with etching for extreme temperature cycling. It is unbacked, not exceeding 0.2 mm in thickness, and falls under tariff item 7607.19.00 as other aluminum foil.
Aluminum Foil Aperture Masks for Displays
Precision-cut aluminum foil masks with micro-perforations, 0.10 mm thick, used in OLED display manufacturing for vapor deposition processes. These unbacked foil masks are cut to complex shapes and fall under tariff item 7607.19.00 as other unbacked aluminum foil not exceeding 0.2 mm in thickness.
Aluminum Foil Diaphragms for Sensors
Circular aluminum foil diaphragms, 0.04 mm thick, cut for pressure sensors in automotive gauges. These unbacked foil diaphragms are shape-cut and under 0.2 mm, classified under tariff item 7607.19.00 as other unbacked aluminum foil.
Aluminum Foil Gaskets for Electronics
Pre-cut aluminum foil gaskets, 0.05 mm thick, designed for sealing electronic components like smartphone casings. These unbacked foil gaskets are cut to specific shapes and fall under tariff item 7607.19.00 as other unbacked aluminum foil not exceeding 0.2 mm.
Aluminum Foil Thermal Pads for LEDs
Square-cut aluminum foil pads, 0.11 mm thick, functioning as heat spreaders under LED chips in lighting modules. These unbacked foil pads are shape-cut and under 0.2 mm, classified under tariff item 7607.19.00 as other unbacked aluminum foil.