Clad 5456 Aluminum Alloy Weldable Sheet
A clad aluminum alloy sheet in 5456-H321 temper, exceeding 0.2 mm in thickness, used for cryogenic tanks and shipbuilding. The cladding enhances weldability while the thickness suits pressure containment. It is classified under tariff item 7606.92.00 as a clad aluminum alloy plate, sheet or strip.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is unclad
This subheading covers plates, sheets and strip of aluminum, not alloyed.
If the sheet is of non-alloy aluminum
This subheading covers clad plates, sheets and strip of aluminum.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the sheet exceeds 0.2 mm thickness and is clad for this classification
• Provide a mill certificate confirming the 5456 alloy and H321 temper
• Verify if shipbuilding end-use requires compliance with Canadian marine safety regulations
Related Products under Tariff item 7606.92.00
1100-H14 Aluminum Alloy Sheet 0.8mm Thick
Near-pure 1100-H14 aluminum alloy sheet at 0.8mm thickness for reflectors and packaging. Although low alloy, it exceeds non-alloy limits, qualifying as an aluminum alloy sheet under this tariff item.
2024-T351 Aluminum Alloy Machining Plate
High-strength 2024-T351 aluminum alloy plate, exceeding 6.3 mm in thickness, used for CNC machining into truck parts. The copper alloying elements classify it as an aluminum alloy, and the unclad rectangular form falls under this tariff item.
2024-T3 Aluminum Alloy Sheet 1.6mm Thick
2024-T3 aluminum alloy sheet, 1.6mm thick, for fuselage skins in aviation. The copper alloying makes it an aluminum alloy, and the unclad form fits this tariff item.
3003-H14 Aluminum Alloy Sheet 2.5mm Thick
3003-H14 aluminum alloy sheet, 2.5mm thick, commonly used for cookware and chemical tanks. The manganese alloying classifies it as an aluminum alloy, and the unclad rectangular form falls under this item.
5052-H32 Aluminum Alloy Plate 5mm Thick
Marine-grade 5052-H32 aluminum alloy plate, 5mm thick, used for boat hulls and tanks. The magnesium content defines it as an alloy, and the unclad form fits this tariff item.
5083-H116 Aluminum Alloy Marine Plate
High-strength 5083-H116 aluminum alloy plate over 6.3 mm thick, corrosion-resistant for shipbuilding and offshore platforms. The magnesium content exceeds 4%, classifying it as an alloy, and the unclad rectangular form falls under this item.