2024-T3 Aluminum Alloy Round Rod 25mm Diameter
An aircraft-grade 2024-T3 aluminum alloy round rod, 25mm diameter, solution heat-treated and cold worked. The copper-bearing alloy has aluminum predominant and is classified under tariff item 7604.29.00 as an 'other' bar or rod of aluminum alloys.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the rod is made of non-alloyed aluminum
Bars and rods of non-alloyed aluminum are classified under a different subheading.
If the product is in coils
Wire of aluminum alloys in coils falls under heading 7605.
If the rod is further machined into a specific part
Other aluminum articles fall under heading 7616.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the rod has a round cross-section and is not in coils, as that would change classification
• Provide alloy composition certificates to confirm it is an aluminum alloy
• If the rod is for aerospace use, check for additional regulatory requirements
Related Products under Tariff item 7604.29.00
2024-T3 Aluminum Alloy Bar
This is a 2024-T3 aluminum alloy bar with a round cross-section, heat-treated for high strength in aircraft and structural applications. It is classified under tariff item 7604.29.00 as an aluminum alloy bar with a round cross-section, with the copper and other elements exceeding the thresholds for unalloyed aluminum.
2024-T3 Aluminum Alloy Channel Profile
This is a 2024-T3 channel profile, a heat-treatable copper-magnesium alloy extrusion used for aircraft fittings and industrial machinery. It is a solid profile of aluminum alloy, falling under tariff item 7604.29.00.
5083-H116 Aluminum Round Bar 3/4 Inch Marine Grade
A marine-grade 5083-H116 aluminum alloy round bar, 3/4 inch diameter, with excellent corrosion resistance for boat building. The magnesium-dominant alloy is classified under tariff item 7604.29.00 as an 'other' bar or rod of aluminum alloys.
6060 Aluminum Round Rod 12mm T6 Temper
This is a 6060 aluminum alloy round rod, 12 mm in diameter, in T6 temper. It is classified under tariff item 7604.29.00 as an aluminum alloy rod with a round cross-section, as the magnesium and silicon content exceeds the limits for unalloyed aluminum.
6061 Aluminum Angle Profile
This is an L-shaped angle profile extruded from 6061 aluminum alloy, which is a heat-treatable alloy containing magnesium and silicon. It is used for construction bracketing and reinforcement, and its cross-section is not hollow, making it a profile of aluminum alloys under tariff item 7604.29.00.
6061 Aluminum I-Beam Profile
This is an extruded I-shaped profile made from 6061 aluminum alloy, commonly used in structural applications like framing and supports. It is a solid profile of aluminum alloy, falling under tariff item 7604.29.00.