DWJ Refined Copper Strip 3.8mm Thick 900mm Wide
DWJ-grade deoxidized refined copper strip, 3.8 mm thick and 900 mm wide, used for marine hardware bases. Its refined copper composition (at least 99.85% Cu) and dimensions place it under tariff item 7409.19.00 for copper plates, sheets and strip of refined copper, thickness exceeding 0.15 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the strip is in coils
Copper plates, sheets and strip of refined copper, in coils, are classified separately.
If the product is a bar or rod, not a strip
Bars and rods of refined copper are classified under heading 7407.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the copper purity meets the refined copper definition (≥99.85% Cu) and keep mill certificates as proof
• Verify the thickness exceeds 0.15 mm and width is over 500 mm to confirm classification
• Declare the value in Canadian dollars and be ready for potential CBSA verification of copper content
Related Products under Tariff item 7409.19.00
99.95% Pure Refined Copper Sheet 0.5mm Thick 1100mm Wide
Ultra-pure 99.95% refined copper sheet 0.5mm x 1100mm for vacuum chamber linings. Low impurity levels are essential for high-vacuum applications.
99.99% Pure Refined Copper Block Sheet 7mm Thick
Ultra-pure 99.99% refined copper block sheet, 7mm thick, for semiconductor heat sinks. Its exceptional purity minimizes impurities, making it ideal for high-performance thermal management applications.
Annealed Refined Copper Sheet 2.5mm Thick 800mm Wide
Soft annealed refined copper sheet 2.5mm thick, 800mm wide for architectural flashing and ornaments. Provides malleability for forming applications.
Anode-Grade Refined Copper Plate 15mm Thick
Anode-grade refined copper plate, 15mm thick, for secondary smelting feed. This semi-fabricated form is used as a raw material in smelting operations.
Busbar Grade Refined Copper Sheet 4mm Thick 700mm Wide
Busbar-grade refined copper sheet 4mm thick x 700mm wide for electrical substations. Meets ASTM B187 standards for conductivity.
C10100 Oxygen-Free Copper Sheet
C10100 oxygen-free copper sheet, 99.99% Cu with minimal oxygen, 2 mm thick and 420 mm wide, used for RF shielding. The refined copper purity and dimensions (thickness >0.15 mm, width <500 mm) place it under tariff item 7409.19.00.