C11000 Electrolytic Tough Pitch Copper Strip
C11000 electrolytic tough pitch copper strip, 99.9% Cu, 0.25 mm thick and 450 mm wide, used in electrical busbars. The refined copper composition and dimensions (thickness >0.15 mm, width <500 mm) qualify it for tariff item 7409.19.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If supplied in coils
Refined copper strip in coils is classified under a separate tariff item.
If the product is wire, not strip
Copper wire of refined copper is classified under heading 7408.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Keep ETP grade certifications showing copper purity ≥99.9% for refined copper classification
• Verify thickness exceeds 0.15 mm and width is under 500 mm
• Ensure the strip is not in coil form, which would require a different tariff item
Related Products under Tariff item 7409.19.00
99.95% Pure Refined Copper Sheet 0.5mm Thick 1100mm Wide
Ultra-pure 99.95% refined copper sheet 0.5mm x 1100mm for vacuum chamber linings. Low impurity levels are essential for high-vacuum applications.
99.99% Pure Refined Copper Block Sheet 7mm Thick
Ultra-pure 99.99% refined copper block sheet, 7mm thick, for semiconductor heat sinks. Its exceptional purity minimizes impurities, making it ideal for high-performance thermal management applications.
Annealed Refined Copper Sheet 2.5mm Thick 800mm Wide
Soft annealed refined copper sheet 2.5mm thick, 800mm wide for architectural flashing and ornaments. Provides malleability for forming applications.
Anode-Grade Refined Copper Plate 15mm Thick
Anode-grade refined copper plate, 15mm thick, for secondary smelting feed. This semi-fabricated form is used as a raw material in smelting operations.
Busbar Grade Refined Copper Sheet 4mm Thick 700mm Wide
Busbar-grade refined copper sheet 4mm thick x 700mm wide for electrical substations. Meets ASTM B187 standards for conductivity.
C10100 Oxygen-Free Copper Sheet
C10100 oxygen-free copper sheet, 99.99% Cu with minimal oxygen, 2 mm thick and 420 mm wide, used for RF shielding. The refined copper purity and dimensions (thickness >0.15 mm, width <500 mm) place it under tariff item 7409.19.00.