C12200 Phosphorized Copper Sheet Coil
Phosphorized refined copper (C12200) sheet coil, 1.5 mm thick and 1000 mm wide, used for roofing and cladding. The product is refined copper (phosphorus content below the alloy threshold) presented in coils, meeting the dimensional requirements of this tariff item. It is excluded from alloy classification under Chapter 74 notes.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the copper is not phosphorized or contains other deoxidizers
Covers other refined copper plates, sheets and strip not in coils or with different deoxidizer content.
If the copper-zinc alloy (brass) content exceeds the refined copper limits
Applies to copper-zinc base alloys in coils, if the product is actually a brass rather than refined copper.
If the product is of other copper alloys
Covers plates, sheets and strip of copper alloys other than brass or bronze.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the phosphorus content is below 0.015% to qualify as refined copper, not a copper alloy
• Provide a mill certificate with the copper purity and dimensions to the CBSA
• Verify the thickness exceeds 0.15 mm and the product is in coil form
Related Products under Tariff item 7409.11.00
Annealed Refined Copper Ribbon for Heat Sinks
Soft-annealed refined copper ribbon coil, 0.8 mm thick and 480 mm wide, used for heat sink fins. The annealing process enhances thermal conductivity without altering the refined copper composition. It falls under this tariff item as refined copper in coils with a thickness exceeding 0.15 mm.
Architectural Copper Coil Stock 3.0mm
Heavy gauge architectural copper coil stock, 3.0 mm thick, used for building facades and cladding. This refined copper plate/sheet in coils falls under tariff item 7409.11.00 as it exceeds 0.15 mm thickness and is presented in coil form.
Battery Current Collector Copper Foil 0.1mm Wait, 0.4mm
Refined copper strip, 0.4 mm thick, in coils, designed for battery current collectors. This product falls under tariff item 7409.11.00 as a plate/sheet/strip of refined copper exceeding 0.15 mm thickness, presented in coils.
Battery Tab Refined Copper Foil Coil
Ultra-thin refined copper foil coil for lithium battery tabs, 0.15mm thick and 150mm wide. The refined copper composition and coil form meet the tariff item criteria, with thickness exceeding 0.15mm.
Busbar Grade ETP Copper Coil 4.0mm
ETP (electrolytic tough pitch) copper coil stock, 4.0 mm thick, for electrical busbars with high IACS conductivity. This refined copper plate in coils is classified under tariff item 7409.11.00, as it exceeds 0.15 mm thickness and is presented in coil form.
C10100 Oxygen-Free Copper Wide Coil
Ultra-pure oxygen-free copper (C10100) coil stock, 0.4 mm thick, 600 mm wide, for RF shielding. This refined copper plate/sheet in coils is classified under tariff item 7409.11.00, meeting thickness and width specifications.