Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm, unworked
Copper bars, rods and profiles. > Of refined copper > Other > Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm, unworked
Duty Rate (from China)
Products classified under Tariff item 7407.10.90.10
Architectural Copper Trim Bar
A refined copper rectangular bar with a polished finish for architectural door and window trim profiles. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given its solid rectangular cross-section and refined copper composition. The product develops a natural patina over time, making it suitable for architectural applications.
7407.10.90Busduct Copper Rectangular Conductor
A refined copper rectangular conductor bar for insulated busduct systems in commercial buildings. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given its solid rectangular cross-section. The product is used in electrical distribution and may be epoxy-primed, which does not affect its classification as a bar.
7407.10.90C10100 Copper RF Gasket Profile
C10100 OFHC copper knife-edge profiles for RF cavity gaskets and vacuum seals. These are solid profiles of refined copper, not hollow, and are used in specialized applications requiring ultra-pure copper.
7407.10.90C10100 OFHC Copper Round Corner Profile
C10100 OFHC copper quarter-round corner profiles for architectural trim and edging. These are solid profiles of refined copper with a specific cross-section, used for aesthetic and protective purposes in construction.
7407.10.90C101 Oxygen-Free Copper Round Rod
A high-purity round rod made from C101 oxygen-free refined copper, used in electronics for its excellent conductivity and minimal oxygen content. It qualifies as a bar or rod of refined copper under tariff item 7407.10.90, which covers other bars, rods, and profiles of refined copper. Its composition meets the definition of refined copper in Chapter 74 legal notes.
7407.10.90C101 Refined Copper Rectangular Bar
A high-purity C101 refined copper bar with a rectangular cross-section, typically used in electrical busbars and heat exchangers. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given its solid rectangular cross-section. The product meets the refined copper purity requirements in Chapter 74.
7407.10.90C10200 Copper Waveguide Profile
C10200 copper WR-90 waveguide profiles for X-band radar systems. These are solid profiles of refined copper with precise dimensions for microwave applications.
7407.10.90C10200 Deoxidized Copper Bar
A C10200 phosphor-deoxidized refined copper rectangular bar for plumbing fittings and marine hardware. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given its solid rectangular cross-section. The product offers excellent corrosion resistance in saltwater environments.
7407.10.90C10200 OF Copper T-Slot Profile
C10200 oxygen-free copper T-slot profiles for machine tool rails and heat sink extrusions. These are solid profiles of refined copper with a T-shaped cross-section, used in industrial applications.
7407.10.90C103 OF Copper Flat Bar
A flat bar made from C103 oxygen-free refined copper, used for commutators and busbars due to its high strength-to-weight ratio. It falls under tariff item 7407.10.90 as an 'other' bar of refined copper, given its solid rectangular cross-section and refined copper composition. The product meets the purity requirements for refined copper in Chapter 74.
7407.10.90C10800 OFXLP Copper U-Channel Profile
C10800 oxygen-free extra-low phosphorus copper U-channel profiles for RF shielding and waveguide components. These are solid profiles of refined copper with a U-shaped cross-section.
7407.10.90C11000 Copper Architectural Mullion Profile
C11000 copper extruded mullion profiles with snap-fit grooves for curtain wall systems. These are solid profiles of refined copper with a complex cross-section for architectural use.
7407.10.90C11000 Copper Solar Panel Frame Profile
C11000 copper L-profiles for premium solar panel edge framing. These are solid profiles of refined copper with an L-shaped cross-section, used for structural and aesthetic purposes.
7407.10.90C11000 ETP Copper L-Section Profile
C11000 ETP copper extruded L-shaped angle profiles for structural framing and busbar supports. These are solid profiles of refined copper with an L-shaped cross-section.
7407.10.90C110 Electrolytic Tough Pitch Copper Bar
A rectangular bar of C110 electrolytic tough pitch refined copper, ideal for busbars in power distribution due to its superior thermal conductivity. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, with a solid rectangular cross-section. The copper purity meets the refined copper standard in Chapter 74.
7407.10.90C11300 STP Copper Busbar Profile
C11300 silver-bearing tough pitch copper extruded busbar profiles with cooling fins for power distribution panels. These are solid profiles of refined copper with a complex cross-section.
7407.10.90C12000 Copper EDM Electrode Profile
C12000 copper custom profiles extruded for electrical discharge machining electrodes. These are solid profiles of refined copper with complex cross-sections matching mold cavities.
7407.10.90C12000 DLP Copper Angle Profile
C12000 deoxidized low phosphorus copper 90-degree angle profiles for marine hardware and ornamental ironwork. These are solid profiles of refined copper with an L-shaped cross-section.
7407.10.90C120 Deoxidized Copper Rod
A low-residual phosphorus C120 refined copper rod for heat exchangers, offering excellent corrosion resistance in marine environments. It is classified under tariff item 7407.10.90 as an 'other' rod of refined copper, as its phosphorus content does not exceed the limits for refined copper. The product maintains refined copper status under Chapter 74 definitions.
7407.10.90C12200 Copper Heat Exchanger Profile
C12200 copper finned profiles for dry coolers and radiators. These are solid profiles of refined copper with fins to enhance heat transfer surface area.
7407.10.90C12200 Phosphorized Copper Z-Profile
C12200 DHP copper extruded Z-profiles used in roofing clips and HVAC connectors. These are solid profiles of refined copper with a Z-shaped cross-section.
7407.10.90C122 Phosphorized Copper Rod
A DHP (deoxidized high phosphorus) C122 copper rod for plumbing fittings, containing trace phosphorus for weldability. It is classified under tariff item 7407.10.90 as an 'other' rod of refined copper, as its phosphorus content is below the threshold that would make it an alloy. The product is used in plumbing applications due to its weldability and corrosion resistance.
7407.10.90C17500 Beryllium Copper Profile Rod
C17500 beryllium copper alloy profile rod with a T-section for industrial applications. This is an alloy of copper and beryllium, not refined copper, and is classified as a profile.
7407.10.90C18200 Chromium Copper Rectangle Profile
C18200 chromium copper extruded rectangular profiles for resistance welding electrodes. This is a copper alloy with chromium, not refined copper, and is classified as a profile.
7407.10.90Electrical Grade Cu Rectangle Stock
A 99.9% IACS conductivity refined copper rectangular stock for custom busbar fabrication, annealed for maximum formability. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given its solid rectangular cross-section. The product's high conductivity makes it suitable for electrical applications.
7407.10.90ETP Copper Bus Bar Profile
An electrolytic tough pitch (ETP) copper rectangular profile designed for power distribution busbars in electrical panels. It is classified under tariff item 7407.10.90 as an 'other' profile of refined copper, given its solid rectangular cross-section. The product meets the refined copper purity requirements in Chapter 74.
7407.10.90ETP Copper Square Profile Rod
A square cross-section ETP copper rod for architectural accents and transformer windings, with high ductility for bending applications. It is classified under tariff item 7407.10.90 as an 'other' profile of refined copper, given its solid square cross-section. The product meets the refined copper purity requirements in Chapter 74.
7407.10.90Heat Sink Copper Rectangle Profile
A machinable refined copper rectangular profile optimized for CNC heat sink production in electronics cooling. It is classified under tariff item 7407.10.90 as an 'other' profile of refined copper, given its solid rectangular cross-section. The product contains a free-machining sulfur addition of less than 0.06%, which does not affect its refined copper status.
7407.10.90High-Purity Cu Rectangle Extrusion
A high-purity refined copper rectangular profile, extruded to a solid rectangular cross-section with tight dimensional tolerances, intended for use in semiconductor heat sinks and precision components. It qualifies as a bar or profile of refined copper under tariff item 7407.10.90 because it is not a hollow profile and is not further worked beyond extrusion.
7407.10.90Marine Grade Refined Cu Bar
A refined copper bar with a solid rectangular cross-section, containing phosphorus to enhance corrosion resistance for marine applications such as propeller shafts and underwater fittings. It is classified under tariff item 7407.10.90 as an 'other' bar or profile of refined copper, not a hollow profile.
7407.10.90Oxygen-Free Copper Rectangular Profile
An oxygen-free high-conductivity (OFHC) copper bar with a solid rectangular cross-section, used for RF shielding and microwave components due to its high electrical conductivity. It falls under tariff item 7407.10.90 as an 'other' refined copper bar or profile, since it is not hollow and is not further worked.
7407.10.90Oxygen-Free High-Conductivity Copper Bar
An OFHC C102 copper bar for RF components and cryogenics, with less than 5 ppm oxygen. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given its high purity and solid cross-section. The product's superior purity prevents hydrogen embrittlement in precision applications.
7407.10.90Phosphorized Refined Copper Rod Section
A phosphorus-deoxidized refined copper bar with a solid rectangular cross-section, used for welding electrodes and structural components. It is classified under tariff item 7407.10.90 as an 'other' bar of refined copper, given it is not a hollow profile and has not been further worked after extrusion.
7407.10.90Precision Machining Copper Rectangle
An ultra-precise refined copper rectangular bar with tight dimensional tolerances, stress-relieved for use in aerospace connector blocks. It falls under tariff item 7407.10.90 as an 'other' bar of refined copper, since it is a solid rectangular profile and not further worked beyond extrusion and stress-relieving.
7407.10.90Refined Copper Hexagonal Rod
A hexagonal refined copper rod for bolt stock and decorative trim, with precision tolerances for machining. It is classified under tariff item 7407.10.90 as an 'other' rod of refined copper, given its uniform hexagonal cross-section. The product meets the refined copper purity requirements in Chapter 74.