Other

99.99% Pure Copper Cathode Sheets

99.99% pure copper cathode sheets, measuring 1m x 1m, produced via electrolytic refining. They are used directly in continuous casting lines for copper rod production, meeting international electrical conductivity standards. These cathodes are unwrought refined copper, falling under tariff item 7403.11.00.

Codelco Premium Copper Cathodes

Premium electrolytic copper cathodes from Chile, stamped with the 'Codelco Triangle' and meeting Grade A specifications. These are used by global wire and tube manufacturers for high-conductivity applications. They are unwrought refined copper, classified under tariff item 7403.11.00.

Electrolytic Copper Cathode Grade LME A

Electrolytic copper cathodes of Grade LME A, produced via electrowinning, with 99.99% purity and minimal impurities. These are the standard form of refined copper traded on the LME and used as feedstock for various copper products. They are unwrought refined copper, falling under tariff item 7403.11.00.

Electrowon Copper Cathode Sections

Sections cut from large electrolytic copper cathodes, typically 50cm x 50cm, for specialty casting operations. These maintain full cathode purity specifications while allowing smaller lot imports. They are sections of cathodes, classified under tariff item 7403.11.00.

Freeport-McMoRan Copper Cathodes

US-produced electrolytic copper cathodes from Freeport-McMoRan operations, primarily from Arizona mines. These high-quality cathodes feed domestic rod and tube producers. They are unwrought refined copper, classified under tariff item 7403.11.00.

Glencore Copper Cathode Panels

Electrolytic copper cathode panels cut to standard dimensions, ideal for continuous casting and rolling mills. Purity exceeds 99.97% Cu with controlled oxygen content for optimal workability. These are sections of cathodes, classified under tariff item 7403.11.00.

KGHM Polska Miedź Copper Cathodes

Polish electrolytic copper cathodes marked with the KGHM diamond logo, produced to European ETP standards. Widely used in cable manufacturing across North America. These are unwrought refined copper, classified under tariff item 7403.11.00.

Norilsk Nickel Refined Copper Cathodes

Russian-produced electrolytic copper cathodes suitable for electrical applications, typically bundled in 25-ton lots. These cathodes serve as primary input for brass and copper alloy manufacturing worldwide. They are unwrought refined copper, classified under tariff item 7403.11.00.

9999E High Purity Electronic Grade Copper Wire Bar

Ultra-pure 99.99% refined copper wire bar, produced for semiconductor bonding wire manufacturing. As an unwrought refined copper product in wire-bar form, it is classifiable under tariff item 7403.12.00, which covers refined copper wire-bars.

C101 Oxygen-Free Refined Copper Wire Bar

C101 oxygen-free refined copper wire bar, designed for drawing into fine electrical wires. As a high-purity unwrought refined copper product in wire-bar form, it falls under tariff item 7403.12.00.

C102 Deoxidized High Phosphorus Copper Wire Bar

C102 deoxidized high phosphorus copper wire bar, with controlled phosphorus for deoxidation, used in welding wire and high-conductivity applications. It is unwrought refined copper in wire-bar form, classifiable under tariff item 7403.12.00.

C110 Electrolytic Tough Pitch Copper Wire Bar

C110 electrolytic tough pitch copper wire bar, produced via electrolytic refining, offering high conductivity for wire drawing in power cables. As unwrought refined copper in wire-bar form, it is classified under tariff item 7403.12.00.

C120 DHP Free Deoxidized Copper Wire Bar

C120 DHP free deoxidized copper wire bar, with high residual phosphorus, used for plumbing tube and wire production. It is unwrought refined copper in wire-bar form, classifiable under tariff item 7403.12.00.

Continuous Cast Copper Billets for Rod Extrusion

Continuous cast refined copper billets, typically 200-300mm in diameter, are unwrought products of refined copper (at least 99.85% copper by weight) used for hot extrusion into copper rods and subsequent wire drawing. They fall under tariff item 7403.13.00 as billets of refined copper, not yet worked after casting.

Electrolytic Tough Pitch Copper Billets

Electrolytic tough pitch (ETP) copper billets are refined copper (99.9% Cu with controlled oxygen) cast into billet form for wire rod production. As unwrought refined copper in billet form, they are classified under tariff item 7403.13.00, provided they are not subsequently worked.

High Purity Refined Copper Billets

High purity refined copper billets (99.99% Cu) are cylindrical semi-finished products used primarily for extrusion into rods and wires. They are unwrought refined copper in billet form, meeting the definition of refined copper under chapter note 1(a), and are classified under tariff item 7403.13.00.

Oxygen-Free High Conductivity Copper Billets

Oxygen-free high conductivity (OFHC) copper billets feature ultra-low oxygen content (<10 ppm) for superior electrical performance, used for magnet wire. They are refined copper (≥99.95% Cu) in unwrought billet form, classified under tariff item 7403.13.00 as billets of refined copper.

Premium Refined Copper Billets 8-Inch Diameter

Premium refined copper billets of 8-inch (200mm) diameter with a surface free of cracks are used for high-quality rod production in automotive wiring harnesses. These unwrought refined copper billets meet the purity requirements for refined copper and are classified under tariff item 7403.13.00.

C10100 Oxygen-Free Electronic (OFE) Copper Ingots

C10100 Oxygen-Free Electronic (OFE) Copper Ingots are ultra-high purity refined copper ingots with less than 0.0005% oxygen, cast for electronic applications. They are unwrought refined copper, not meeting the highest purity threshold for the 'refined copper' subheading, and are not master alloys. They fall under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C10200 Oxygen-Free Copper Billets

C10200 Oxygen-Free Copper Billets are refined copper billets with low oxygen content, cast in cylindrical unwrought form for extrusion into tubes or rods. They are unwrought refined copper, not master alloys, and are classified under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C10300 Oxygen-Free Low Phosphorus Copper Slabs

C10300 Oxygen-Free Low Phosphorus Copper Slabs are refined copper slabs with minimal phosphorus and oxygen for superior conductivity applications. They are unwrought refined copper forms other than the highest purity grade, and are not master alloys. They fall under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C11000 Electrolytic Tough Pitch (ETP) Copper Cathodes

C11000 Electrolytic Tough Pitch (ETP) Copper Cathodes are high-purity refined copper cathodes produced via electrolytic refining, containing at least 99.9% copper with minimal oxygen content. They are unwrought refined copper, not master alloys, and are classified under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C11300 Electrolytic Copper Anode Slabs (Refined Grade)

C11300 Electrolytic Copper Anode Slabs (Refined Grade) are refined copper anode slabs from electrolytic process, with 99.95%+ purity for remelting. They are unwrought refined copper products, not master alloys, and fall under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C11400 Silver-Bearing Refined Copper Ingots

C11400 Silver-Bearing Refined Copper Ingots are refined copper ingots with 0.04-0.12% silver for improved properties, still classified as refined copper. They are unwrought refined copper containing minor precious metal traces, not master alloys, and fall under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C11600 Refined Copper Wire Bars

C11600 Refined Copper Wire Bars are semi-circular refined copper wire bars cast for continuous casting into wire rods. They are unwrought refined copper forms, not master alloys, and are classified under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C12000 Domical Phosphorus Copper Slabs

C12000 Domical Phosphorus Copper Slabs are refined copper slabs with 0.004-0.12% phosphorus, 'domical' grade for specific welding uses. They are unwrought refined copper with deoxidant addition, not master alloys, and fall under tariff item 7403.19.00 as 'Other' unwrought refined copper.

C12200 Phosphorized Copper Cakes

C12200 Phosphorized Copper Cakes are refined copper cakes with trace phosphorus (0.015-0.040%) for deoxidation, in flat unwrought slab form. They are unwrought refined copper, not master alloys, and are classified under tariff item 7403.19.00 as 'Other' unwrought refined copper, used primarily for welding rod production.