Hex Washer Head Self-Tappers #10
Hex washer head self-tapping screws, #10 size (4.8 mm diameter), combining a screw, washer, and hex drive in one piece. These are used in roofing and outdoor metal applications where a secure, weather-resistant fastening is needed.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsHCConsumer Products SafetyMay be required
- HC
Consumer Products Safety · May be required
May require HC Consumer Products Safety depending on intended use (HC21) and Canadian product category (HC29, HC30, HC31, HC32, HC33, HC34, HC35, HC36, HC37); or intended use (HC22, HC23, HC24, HC26, HC27) and Canadian product category (HC37). Matching criteria: Equal To 7318140000; Equal To 7318140000. Logic: MATCH IF (Valid HS Code) AND (Intended Use Code) AND (Valid Canadian Product Category).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the screws are used with nuts or have a machine screw thread
Bolts and machine screws are classified under 7318.15.00.
If the product is a nut rather than a screw
Nuts are classified under 7318.16.00.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the screws are self-tapping and not standard bolts, which would fall under 7318.15.00
• Provide the exact diameter and material specifications to the CBSA
• Consider the end-use application to ensure correct classification
Related Products under Tariff item 7318.14.00
3.5mm Pan Head Stainless Self-Tapping Screw
3.5 mm pan head stainless steel self-tapping screw with a low-profile head, used in appliance manufacturing and electronics. The stainless steel construction provides corrosion resistance, and the self-tapping design cuts threads during installation.
4.2mm Hex Washer Head Self-Tapper
4.2 mm hex washer head self-tapper in stainless steel, featuring an integrated washer head for load distribution. Used in outdoor equipment assembly where corrosion resistance and secure fastening are essential.
Bugle Head Drywall Self-Tapper 7mm
A 7 mm bugle head self-tapping screw for securing drywall to metal studs, countersinking smoothly without tearing the paper. Its larger diameter (over 6 mm) provides a stronger hold in heavier applications. This product falls under 7318.14.00 as a self-tapping screw of iron or steel, with a shank diameter of 7 mm.
Chipboard Self-Tapping Screws #8 x 1/2"
Chipboard self-tapping screws, #8 size (4 mm diameter), designed with double threads for secure grip in particle board and MDF. Their coarse lower threads cut into wood-based materials without pre-drilling, making them essential for furniture and cabinet assembly.
Coach Screw Self-Tapper 1/4 Inch (6.35mm)
A 1/4 inch (6.35 mm) coach style self-tapping screw for heavy timber, providing a secure hold without pre-drilling. Its larger diameter and aggressive threads are designed for demanding applications. Classified under 7318.14.00 as a self-tapping screw of iron or steel, with a shank diameter over 6 mm.
Construction Grade Self-Tapping Tek 10G
A 10 gauge (approximately 7.5 mm) construction Tek self-tapping screw for steel purlins, designed to drill its own pilot hole and tap threads in one operation. Its larger diameter provides a strong hold in structural applications. This product falls under 7318.14.00 as a self-tapping screw of iron or steel, with a shank diameter over 6 mm.