30L Refillable Stainless Steel Craft Brewery Keg
A 30-litre cylindrical stainless steel keg with domed ends and a single neck with extractor spear for a valve coupler, used in microbreweries for beer transport and dispensing. Imported empty and without mechanical or thermal equipment, it supports repeated cleaning and refilling under pressure, qualifying for tariff item 7310.10.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the keg is imported with a permanently installed spear or valve
Fitted containers are excluded from heading 73.10 and may be classified elsewhere.
If the keg is considered a finished article rather than a container
Other articles of iron or steel may apply if the keg has specialized features.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the keg is shipped without couplers, spears, or any attached equipment to stay within this tariff item
• The CBSA may require proof that the keg is designed for repeated use, so keep manufacturer documentation
• If the keg is imported with a spear installed, consider whether it constitutes a part of general use under Section Note 2
Related Products under Tariff item 7310.10.00
100-Liter Steel Fuel Cask
A heavy-duty 100-liter steel cask designed for the safe storage of diesel fuel or kerosene in workshops. It is a plain iron or steel container, without lining or heat insulation, and is not fitted with mechanical or thermal equipment. Its capacity of 50 litres or more places it under tariff item 7310.10.00.
120-Liter Steel Oil Drum
A standard 120-liter steel drum with rolling hoops, used for storing and transporting lubricating oils and hydraulic fluids. It is uninsulated and lacks any mechanical or thermal fittings, making it a simple iron or steel container. With a capacity of 50 litres or more, it is classified under tariff item 7310.10.00.
150-Liter Steel Water Tank
A galvanized steel tank with a 150-liter capacity, intended for rainwater collection or emergency water storage. It is a plain iron or steel container, not lined or heat-insulated, and without mechanical or thermal equipment. Its capacity of 50 litres or more qualifies it for tariff item 7310.10.00.
1/6 Barrel Refillable Stainless Steel Cornelius Keg
A 19.5-litre (1/6 barrel) refillable stainless steel keg with domed top and bottom, featuring a pin-lock neck for a coupler and spear. Designed for commercial refill cycles and pressurization of craft soda or beer, it is imported empty and without mechanical or thermal equipment, qualifying under tariff item 7310.10.00 for containers of a capacity of 50 litres or more.
180-Liter Steel Paint Drum
An interior-coated 180-liter steel drum specifically designed for storing architectural paints and coatings. The lining is permitted under the tariff item, and the drum has no mechanical or thermal equipment. With a capacity of 50 litres or more, it falls under tariff item 7310.10.00.
200-Liter Closed Steel Barrel
A sealed 200-liter steel barrel with bung closures, used for containing paints, resins, or food-grade liquids. It is a plain iron or steel container without lining or heat insulation, and lacks mechanical or thermal equipment. Its capacity of 50 litres or more places it under tariff item 7310.10.00.