Carbon Steel Butt-Weld Cross Fitting 3-inch
A four-way cross fitting made from non-alloy carbon steel, with a 75 mm inside diameter, designed for multi-directional pipe connections through butt welding. This fitting falls under tariff item 7307.93.00 as a butt welding fitting of iron or steel, with an inside diameter not exceeding 360 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the cross fitting is not of the butt welding type, such as threaded or socket welding.
Other fittings of iron or steel are classified under this item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the fitting is made of non-alloy steel, as alloy steel versions are classified under a different item
• Ensure the inside diameter is correctly documented to confirm classification under the 360 mm limit
• Keep records of the manufacturing standard (e.g
• ASTM) for CBSA verification
Related Products under Tariff item 7307.93.00
ASTM A234 WPB Butt-Weld Elbow 150 mm
A carbon steel long-radius elbow fitting per ASTM A234 WPB, with a 150 mm inside diameter, designed for butt-welding in refinery piping systems. This non-alloy steel fitting is classified under tariff item 7307.93.00 as a butt welding fitting of iron or steel, with an inside diameter not exceeding 360 mm.
Black Iron Butt-Weld Equal Tee DN100
An uncoated black iron equal tee with a nominal diameter of DN100 (114 mm outer diameter, approximately 100 mm inside diameter), intended for butt-welded steam distribution lines. This iron butt-welding fitting is classified under tariff item 7307.93.00 as it is a butt welding fitting of iron or steel with an inside diameter under 360 mm.
Carbon Steel Butt-Weld Elbow 4-inch
A 90-degree elbow fitting made from non-alloy steel with an inside diameter of 100 mm, designed for butt welding to connect pipes in low-pressure plumbing systems. This butt-welding fitting is classified under tariff item 7307.93.00 as it is made of iron or non-alloy steel with an inside diameter under 360 mm.
Carbon Steel Butt-Weld Lateral 4-inch
A 45-degree lateral branch fitting made from non-alloy steel, with a 4-inch size, designed for butt-welded angled pipe takeoffs in mining slurry lines. This butt-welding fitting is classified under tariff item 7307.93.00 as it is made of iron or non-alloy steel with an inside diameter under 360 mm.
Forged Carbon Steel Butt Weld Elbow 4 Inch
A rough forged elbow fitting made of non-alloy steel with an inside diameter of 100 mm, designed for butt welding in low-pressure piping systems. This fitting is not machined, tooled, or otherwise processed after forging, qualifying it under tariff item 7307.93.00 as a butt welding fitting of iron or non-alloy steel with an inside diameter under 360 mm.
Forged Iron Butt Weld Cap 8 Inch
An end cap fitting forged from cast iron or non-alloy steel, with a 200 mm inside diameter, designed for sealing butt weld pipe ends in construction plumbing. This fitting remains unprocessed after forging, aligning with tariff item 7307.93.00 as a butt welding fitting of iron or non-alloy steel with an inside diameter under 360 mm.