Of other non-circular cross-section
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. > Other, welded, of non-circular cross-section: > Of other non-circular cross-section
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7306.69.00
Alloy Steel D-Shaped Structural Pipe 150x100x8mm
A welded D-shaped hollow profile of alloy steel, with 150mm height, 100mm width, and 8mm wall, for crane boom sections. Its non-circular cross-section and welded construction classify it under tariff item 7306.69.00.
Alloy Steel Hexagonal Hollow Profile 100mmx6mm Wall
A welded hexagonal cross-section hollow profile from alloy steel, with 100mm across flats and 6mm walls, used in material handling frames. Its non-circular cross-section and welded construction place it under tariff item 7306.69.00.
Alloy Steel L-Shaped Hollow Section 250x150x7mm
A welded L-profile hollow section from alloy steel, with 250mm by 150mm dimensions and 7mm walls, reinforced for bridge components. Its non-circular cross-section and welded construction classify it under tariff item 7306.69.00.
Alloy Steel Octagonal Hollow Profile 80mmx5mm
A welded octagonal tube of alloy steel, with 80mm across flats and 5mm wall, for architectural columns. Its non-circular cross-section and welded construction place it under tariff item 7306.69.00.
Alloy Steel Square Hollow Section 200x200x5mm
A welded square hollow profile of alloy steel, with 200mm by 200mm dimensions and 5mm wall thickness, used in construction columns and offshore platforms. Its non-circular cross-section and welded construction classify it under tariff item 7306.69.00.
Alloy Steel Thin Welded Half-Round Tube
Welded half-round non-circular tubes of silicon-manganese alloy steel, with a 2 mm wall thickness, used for architectural accents. They are classified here as welded, non-circular hollow profiles of alloy steel.
Alloy Steel Welded Custom Nonround Tube
Custom welded non-round (trapezoidal) tubes of quenched alloy steel, with a wall thickness of less than 4 mm, used for robotic arms. They are classified here as welded, non-circular hollow profiles of alloy steel.
Alloy Steel Welded Hexagonal Tubing
Welded hexagonal hollow sections made from maraging alloy steel, with a wall thickness of 3.2 mm, designed for use in defense equipment mounts. These non-circular cross-section tubes are produced by welding and are not intended for pressurized applications, aligning with the tariff item's scope for welded, non-circular alloy steel profiles.
Alloy Steel Welded L-Shaped Hollow Profile
Welded L-shaped hollow profiles made from structural alloy steel, with a wall thickness of less than 4 mm, used for conveyor framing. These non-circular cross-section tubes are formed by welding and are distinct from solid L-bars, fitting the tariff item's definition of welded, non-circular hollow profiles.
Alloy Steel Welded Oval Tubing
Welded oval cross-section tubes made from chrome-moly alloy steel, with a thin wall of less than 4 mm, used in automotive exhaust prototypes. These non-circular hollow profiles are produced by welding and are classified under this tariff item for welded, non-circular alloy steel tubes.
Alloy Steel Welded Oval Tubing 8x4x4.5mm
Welded oval cross-section tube made from alloy steel, with dimensions of 8 inches major axis by 4 inches minor axis and a wall thickness of 4.5 mm. It is used in agricultural equipment frames and falls under this tariff item as a welded, non-circular hollow profile of alloy steel.
Alloy Steel Welded Rectangular Tubing
Welded rectangular tubes made from alloy steel, with a wall thickness under 4 mm and a non-circular cross-section, used in structural frameworks. These tubes are produced by welding and meet the criteria for this tariff item, which covers welded, non-circular alloy steel hollow profiles.
Alloy Steel Welded Rectangular Tubing 6x4x6mm
Welded rectangular tube made of alloy steel, with external dimensions of 6 inches by 4 inches and a wall thickness of 6 mm. It is suitable for structural frameworks in heavy machinery and is classified here as a welded, non-circular hollow profile.
Alloy Steel Welded Semicircular Hollow
Welded semicircular (D-profile) hollows made from heat-resistant alloy steel, with a wall thickness of less than 4 mm, used for furnace components. These non-circular cross-section tubes are produced by welding and are classified under this tariff item for welded, non-circular alloy steel profiles.
Alloy Steel Welded Triangular Hollow Profile
Specialty welded triangular cross-section tubes made from high-strength alloy steel, with walls less than 4 mm thick, used for machinery guards. These non-circular hollow profiles are produced by welding and fit the tariff item's scope for welded, non-circular alloy steel tubes.
Alloy Steel Welded Triangular Tubing 120x10mm
Welded equilateral triangular tube of alloy steel, with a side length of 120 mm and a wall thickness of 10 mm. It is used for specialized conveyor supports and is classified here as a welded, non-circular hollow profile.
Carbon Steel Heavy Wall Square Tube 250x250x12mm
A massive welded square tube of non-alloy carbon steel, measuring 250mm by 250mm with a 12mm wall thickness, designed for heavy-duty applications such as offshore platforms. Its non-circular cross-section and welded construction place it under tariff item 7306.69.00.
Carbon Steel Welded Oblong Hollow Profile 250x80x4.5mm
A welded oblong hollow profile of non-alloy carbon steel, with a 250mm by 80mm cross-section and 4.5mm wall, used for architectural supports. Its non-circular shape and welded seam classify it under tariff item 7306.69.00.
Chrome-Moly Alloy Steel Flat-Oval Tube
Welded flat-oval profile tubes made from 4130 chrome-moly alloy steel, with a 2.5 mm wall thickness, used for bicycle frame prototypes. These non-circular cross-section tubes are produced by welding and are classified under this tariff item for welded, non-circular alloy steel profiles.
Custom Noncircular Steel Tube for Lighting Fixtures
Welded irregular pentagon-shaped tube of non-alloy steel, approximately 35x25 mm with a 2.2 mm wall thickness, used for pendant light arms. It is classified here as a welded, non-circular hollow profile with a custom shape.
D-Shaped Nonalloy Steel Tube 40x20mm
Welded D-shaped hollow tube of iron or non-alloy steel, measuring 40 mm height by 20 mm width with a 1.8 mm wall thickness. It is used in automotive trim and signage frames and is classified here as a welded, non-circular hollow profile.
Elliptical Welded Iron Steel Profile 45x20mm
Welded elliptical hollow profile from iron or non-alloy steel, with a 45 mm major axis and 20 mm minor axis, and a 1.5 mm wall thickness. It is used in greenhouse frameworks and is classified here as a welded, non-circular hollow profile.
Half-Round Noncircular Steel Tube 50x25mm
Welded half-round (semicircular) profile tube of non-alloy steel, measuring 50 mm diameter by 25 mm height with a 2.8 mm wall thickness. It is used for curved architectural elements and is classified here as a welded, non-circular hollow profile.
Heavy Duty Square Nonalloy Steel HSS 180x180x10mm
An extra heavy wall square hollow section welded from non-alloy steel, with 180mm sides and 10mm wall thickness, intended for bridges and columns. The non-circular cross-section and welded construction place it under tariff item 7306.69.00.
Heavy Wall Welded Steel HSS 200x100x8mm
A rectangular hollow structural section (HSS) welded from non-alloy steel, with 200mm by 100mm dimensions and 8mm thick walls, for heavy construction use. Its non-circular cross-section and welded construction qualify it for tariff item 7306.69.00.
L-Shaped Welded Nonalloy Steel Profile 25x25x3mm
Welded L-shaped (angle) hollow profile of non-alloy steel, with 25 mm legs and a 3 mm wall thickness, used for light structural supports in displays. It is classified here as a welded, non-circular hollow profile.
Manganese Alloy Steel Welded Profile
Welded rectangular profiles made from manganese alloy steel, with a 3 mm wall thickness, used for wear-resistant chute linings. These non-circular cross-section tubes are produced by welding and meet the criteria for this tariff item, which covers welded, non-circular alloy steel hollow profiles.
Nickel Alloy Steel Noncircular Welded Tube
Welded non-circular (octagonal) tubes made from Inconel nickel alloy steel, with a 3.5 mm wall thickness, used for chemical processing supports. These tubes are produced by welding and match the tariff item's criteria for welded, non-circular alloy steel hollow profiles.
Nonalloy Steel Welded Oval Tube 140x70x4.2mm
A welded oval non-circular tube from carbon steel, with 140mm major and 70mm minor axis and 4.2mm wall, used for furniture legs. Its non-circular cross-section and welded construction classify it under tariff item 7306.69.00.
Nonalloy Steel Welded Square Tube 150x150x5mm
A heavy-duty welded square tube from non-alloy carbon steel, with 150mm by 150mm cross-section and 5mm wall thickness, for structural applications like frameworks. Its non-circular cross-section and welded construction place it under tariff item 7306.69.00.
Noncircular Welded Steel Tube 120x60x6mm for Machinery Frames
A rectangular welded tube of iron/non-alloy steel, with 120mm by 60mm dimensions and 6mm wall, used in machinery bases. Its non-circular cross-section and welded construction qualify it for tariff item 7306.69.00.
Oval Welded Steel Tube for Handrails 60x30mm
Welded oval hollow profile of non-alloy steel, measuring 60 mm by 30 mm with a 2.5 mm wall thickness, designed for architectural handrails and balustrades. It is classified here as a welded, non-circular hollow profile.
Rectangular Thin-Wall Steel Tube for Gym Equipment
Welded 40x20 mm rectangular tube of non-alloy steel with 2 mm walls, tailored for fitness equipment frames like treadmill bases. It is classified here as a welded, non-circular hollow profile.
Square Nonalloy Steel Hollow Section 50x50mm
Welded square tube of non-alloy steel, measuring 50 mm by 50 mm with a 3 mm wall thickness, commonly used in furniture frames and shelving. It is classified here as a welded, non-circular hollow profile.
Stainless Alloy Steel Square Hollow Section
Welded square hollow profiles made from stainless alloy steel (e.g., 304 grade), with a wall thickness under 4 mm, used for architectural and furniture framing. These non-circular cross-section tubes are produced by welding and fit the tariff item's scope for welded, non-circular alloy steel hollow profiles.
Structural Welded Steel HSS 100x50x5mm
A welded rectangular HSS of non-alloy steel, with 100mm by 50mm dimensions and 5mm wall, for racking systems. Its non-circular cross-section and welded construction place it under tariff item 7306.69.00.
Triangular Welded Steel Hollow Profile 30mm Sides
Welded triangular cross-section tube of non-alloy steel, with 30 mm sides and a 3.2 mm wall thickness, applied in specialized shelving and display racks. It is classified here as a welded, non-circular hollow profile.
Welded Rectangular Steel Hollow Section 100x100x6mm
A welded hollow structural section (HSS) made from non-alloy steel, with a rectangular cross-section measuring 100mm by 100mm and a wall thickness of 6mm. Its non-circular cross-section and welded construction classify it under tariff item 7306.69.00.
Welded Rectangular Steel Tubing 2x1 Inch
Welded hollow profile of non-circular rectangular cross-section, 2 inches by 1 inch, made from non-alloy steel with a 2 mm wall thickness. It is used in structural frameworks for machinery guards and is classified here as a welded, non-circular hollow profile.
Welded Steel Rectangular Profile 300x150x7mm Structural
A large rectangular welded hollow profile of non-alloy steel, with 300mm by 150mm dimensions and 7mm wall, for building girders. Its non-circular cross-section and welded construction place it under tariff item 7306.69.00.