Chapter 7317 — Customs Tariff Headings
Products classified under Tariff item 73.17
16d Common Framing Nails
Heavy-duty 16d (3.5-inch) steel nails made from round wire for framing lumber in residential construction. These one-piece nails are manufactured from round wire with a cross-section under 16 mm, meeting the definition of wire in Chapter 73. They are classified under tariff item 7317.00.00 as nails of iron or steel, with no additional coatings or heads of other materials.
7317.00.00Board Steel Thumb Tacks with Nylon Heads
Board steel thumb tacks with nylon heads are pins of iron or steel featuring a head made of nylon, a material other than copper. They are used to affix papers or fabrics to presentation boards and fall under tariff item 7317.00.00 as similar articles of iron or steel with heads of other material.
7317.00.00Box Nails 10d Size
Lighter 10d (3-inch) box nails made from round steel wire for lighter framing and crating applications. Their thinner shank reduces wood splitting, making them ideal for finish work. These nails are classified under tariff item 7317.00.00 as nails of iron or steel, consistent with their one-piece construction from round wire under 16 mm.
7317.00.00Brass-Plated Steel Thumb Tacks
Brass-plated steel thumb tacks are steel tacks with a flat head plated in brass, giving a decorative finish. The brass plating is a coating, not a head of copper, so these tacks remain within tariff item 7317.00.00 as iron or steel tacks with heads of other material.
7317.00.00Casing Nails 8d
8d (2.5-inch) round wire casing nails with countersunk heads for door and window trim, coated for enhanced holding power. These one-piece nails are made from round wire under 16 mm in cross-section, meeting the Chapter 73 definition of wire. They are classified under tariff item 7317.00.00 as nails of iron or steel, with the coating not affecting their classification.
7317.00.00Ceiling Grid Threaded Fastener
Ceiling grid threaded fasteners are threaded steel clip-pins for securing acoustic ceiling grids to concrete using powder-actuated handtools. They are classified under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Ceiling Pin Powder Tool Fasteners
Ceiling pin powder tool fasteners are short, unthreaded steel pins with countersunk heads, designed for use with powder-actuated tools to fix acoustic ceiling tees to concrete joists. They are classified under tariff item 7317.00.00 as nails of iron or steel, not elsewhere specified, and are not excluded by the chapter notes.
7317.00.00Clear Acrylic-Head Steel Thumb Tacks
Clear acrylic-head steel thumb tacks consist of a steel pin with a transparent acrylic head, used for discreet pinning in home offices. They are classified under tariff item 7317.00.00 as tacks of iron or steel with heads of plastic, which is a material other than copper.
7317.00.00Colored Aluminum-Head Steel Thumb Tacks
Colored aluminum-head steel thumb tacks feature steel shanks with lightweight aluminum heads, designed for visibility on dark boards. These tacks fall under tariff item 7317.00.00 because the heads are of aluminum, a material other than copper, and the shank is iron or steel.
7317.00.00Craft Steel Thumb Tacks with Pearl Heads
Craft steel thumb tacks with pearl heads are steel tacks featuring faux pearl plastic heads, used in scrapbooking and decorative crafts. They are classified under tariff item 7317.00.00 as tacks of iron or steel with heads of plastic, a material other than copper.
7317.00.00Decorative Wooden-Head Steel Thumb Tacks
Decorative wooden-head steel thumb tacks consist of steel pins with small wooden heads, used for artisanal bulletin boards and crafts. They are classified under tariff item 7317.00.00 as tacks of iron or steel with heads of wood, which is a material other than copper.
7317.00.00Drywall Track Threaded Stud
Drywall track threaded studs are threaded studs for attaching metal drywall tracks to overhead concrete decks using powder-actuated tools. They fall under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Electrical Box Threaded Fastener
Electrical box threaded fasteners are threaded steel fasteners for mounting electrical boxes to concrete walls with powder-actuated handtools. They are classified under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Elevator Guide Threaded Pin
Elevator guide threaded pins are precision threaded pins for elevator guide rails to concrete, powder-driven, made of high-strength steel. They fall under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Fluted Shank Masonry Fasteners
Fluted shank masonry fasteners are unthreaded steel fasteners with fluted bodies, used in powder-actuated tools to secure steel channels to block walls. They are classified under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Framing Threaded Collated Pin
Framing threaded collated pins are collated strips of threaded steel pins for high-volume installation in metal framing using powder-actuated systems. They are classified under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Furring Strip Threaded Fastener
Furring strip threaded fasteners are threaded fasteners for furring strips in wall assemblies, powder-actuated into masonry, with adjustable threading. They fall under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Glow-in-the-Dark Plastic Thumb Tacks
Glow-in-the-dark plastic thumb tacks are steel tacks with phosphorescent plastic heads, designed for low-light pinning applications. They fall under tariff item 7317.00.00 as tacks of iron or steel with heads of plastic, a material other than copper.
7317.00.00Heavy Duty Steel Thumb Tacks with Rubber Heads
Heavy-duty steel thumb tacks with rubber heads are robust steel tacks featuring rubber-coated heads for improved grip on rough surfaces like foam boards. They are classified under tariff item 7317.00.00 as tacks of iron or steel with heads of rubber, a material other than copper.
7317.00.00Hex Head Threaded Drive Pin
Hex head threaded drive pins are steel drive pins with hex-shaped heads and full threading, optimized for powder-actuated tools in attaching steel tracks to concrete slabs. They are classified under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00High-Strength Concrete Nail Pins
High-strength concrete nail pins are heat-treated, high-carbon steel pins, unthreaded with chamfered tips, for powder-actuated tools securing rebar safety caps to slabs. They fall under tariff item 7317.00.00 as nails of iron or steel, not excluded by chapter notes.
7317.00.00HVAC Duct Threaded Anchor
HVAC duct threaded anchors are threaded anchor pins for suspending HVAC ducts from concrete ceilings via powder-actuated installation, with corrosion-resistant coating. They fall under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Industrial Steel Thumb Tacks with Metal Caps
Industrial steel thumb tacks with metal caps are steel tacks with capped heads made of other metals, designed for heavy use. They fall under tariff item 7317.00.00 as tacks of iron or steel with heads of other material, provided the caps are not copper.
7317.00.00Jumbo Steel Thumb Tacks with Foam Heads
Jumbo steel thumb tacks with foam heads are large steel tacks with soft foam heads, used for fabric boards without causing damage. They are classified under tariff item 7317.00.00 as tacks of iron or steel with heads of foam, a material other than copper.
7317.00.00Knurled Head Concrete Drive Pins
Knurled head concrete drive pins are steel drive pins with a knurled drive head and fluted body, for powder-actuated fastening of electrical boxes to concrete walls. They are classified under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Knurled Threaded Pin for Powder Tools
A knurled threaded steel pin designed for use with powder-actuated fastening tools, featuring a knurled shank that enhances grip in concrete and masonry. The threaded end allows for nut attachment after installation, making it suitable for framing and drywall applications. This product is classified under tariff item 7317.00.00 as a nail or similar article of iron or steel, with the threading and knurling not altering its essential character as a fastener.
7317.00.00Magnetic Steel Thumb Tacks
Magnetic steel thumb tacks are steel tacks with embedded magnets in plastic heads, designed for use on magnetic boards. They fall under tariff item 7317.00.00 as tacks of iron or steel with heads of plastic, a material other than copper, despite the functional magnet.
7317.00.00Masonry Threaded Anchor Pin
A heavy-duty threaded anchor pin used for securing machinery to masonry surfaces via powder-actuated tools. Its coarse threading accepts standard nuts for tensioning, providing a reliable anchoring solution. This product falls under tariff item 7317.00.00 as a similar article of iron or steel, given its function as a nail-like fastener.
7317.00.00Mini Steel Thumb Tacks for Photos
Mini steel thumb tacks for photos are tiny steel tacks with small plastic heads, used for delicate photo pinning. They are classified under tariff item 7317.00.00 as tacks of iron or steel with heads of plastic, a material other than copper.
7317.00.00Office Standard Steel Thumb Tacks
Office standard steel thumb tacks are classic round-head steel tacks for everyday office use. They are classified under tariff item 7317.00.00 as tacks of iron or steel, whether or not with heads of other material, as long as the heads are not copper.
7317.00.00Plumbing Fixture Threaded Pin
A short threaded pin designed for securing plumbing fixture brackets to masonry walls using powder-actuated tools. Its compact length allows for installation in tight spaces while providing secure fastening. This product is classified under tariff item 7317.00.00 as a similar article of iron or steel, consistent with its use as a nail-type fastener.
7317.00.00Powder-Actuated Steel Drive Pins
Powder-actuated steel drive pins are cylindrical steel pins with fluted shanks and pre-assembled washer heads, for fastening metal tracks to concrete in construction. They are classified under tariff item 7317.00.00 as nails of iron or steel, not excluded by chapter notes.
7317.00.00Push Pin Thumb Tacks Assortment
Push pin thumb tacks assortment includes assorted colors of plastic-headed steel thumb tacks, known as push pins for maps and photos. They fall under tariff item 7317.00.00 as tacks of iron or steel with heads of plastic, a material other than copper.
7317.00.00Retaining Wall Threaded Tie
Threaded tie rods or pins used in retaining wall construction, installed via powder-actuated tools and designed to accept couplers for extended lengths. These products provide structural reinforcement and are classified under tariff item 7317.00.00 as similar articles of iron or steel. Their function as fasteners aligns with the heading's scope.
7317.00.00Sill Plate Threaded Nail
A threaded nail used for anchoring sill plates to concrete foundations with powder-actuated tools, designed to meet seismic code requirements. Its threading provides enhanced pull-out resistance, making it a critical fastener in construction. This product falls under tariff item 7317.00.00 as a nail of iron or steel, with the threading not changing its classification.
7317.00.00Smooth Shank Powder Tool Pins
Smooth shank powder tool pins are unthreaded steel pins with straight smooth shanks and knurled heads, for powder-actuated nailers attaching wood furring strips to masonry. They fall under tariff item 7317.00.00 as similar articles of iron or steel, not excluded by chapter notes.
7317.00.00Steel Thumb Tacks with Plastic Heads
Steel thumb tacks with plastic heads are small steel tacks with flattened, broad plastic heads designed for pinning paper to corkboards or bulletin boards. They are classified under tariff item 7317.00.00 as thumb tacks of iron or steel with heads of other material, specifically plastic.
7317.00.00Threaded Steel Stud for Powder-Actuated Tools
A cylindrical steel pin with external threading, specifically designed for driving into concrete or masonry using powder-actuated handtools. It features a pre-formed head for secure fastening and meets industry standards for construction fasteners. This product is classified under tariff item 7317.00.00 as a similar article of iron or steel, given its nail-like application.
7317.00.00Tilt-Up Concrete Threaded Pin
A specialized threaded pin for temporary bracing in tilt-up concrete panel construction, driven by powder tools and removable for a clean panel finish. Its design allows for easy installation and removal, making it ideal for construction applications. This product falls under tariff item 7317.00.00 as a similar article of iron or steel, consistent with its fastener function.
7317.00.00Washer Head Powder Actuated Pins
Washer head powder actuated pins are steel pins with integrated washer heads and smooth unthreaded shanks, for powder-actuated attachment of metal lath to concrete. They are classified under tariff item 7317.00.00 as nails of iron or steel, not excluded by chapter notes.