Angles, shapes and sections
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. > Angles, shapes and sections
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7228.70.00
4140 Alloy Steel Channel Section 65x35x5mm
This is a hot-rolled U-shaped channel made from 4140 chromium-molybdenum alloy steel, with a maximum dimension of 65 mm, used for machinery framing. It is classified under this tariff item as a shape of other alloy steel, not further worked than hot-rolled.
4340 Alloy Steel Z-Section Purlin 70x40x5mm
This is a hot-rolled Z-shaped purlin made from 4340 nickel-chromium-molybdenum steel, with a maximum dimension of 70 mm, used for roof framing. It falls under this tariff item as a shape of other alloy steel, not further worked than hot-rolled.
A36 Alloy Steel Angle Bar
Hot-rolled L-shaped angle bar made from A36 structural alloy steel, measuring 3x3x1/4 inch, used in construction framing. This product qualifies as an angle, shape, or section of other alloy steel under tariff item 7228.70.00, as it is not further worked beyond hot rolling.
A36 Alloy Steel Angle Bar 50x50x5mm
This is a hot-rolled L-shaped angle bar made from A36 structural alloy steel, with a maximum cross-sectional dimension of 50 mm, used in construction framing. It is classified under this tariff item as an angle of other alloy steel, not further worked than hot-rolled.
Alloy Steel Angle Bar 125x125x12mm Hot-Rolled
An equal-leg hot-rolled angle section from other alloy steel, 125 mm x 125 mm with 12 mm wall thickness, used in construction bracing. Its maximum dimension exceeds 76 mm, placing it under 7228.70.00 as a shape or section of other alloy steel.
Alloy Steel Angle Profile 45x45x5mm Hot-Rolled
This is a 45 mm equal angle profile hot-rolled from alloy steel, used for general fabrication and repair work. It is classified under this tariff item as an angle, shape, or section of other alloy steel, with a maximum cross-section under 76 mm, not further worked.
Alloy Steel Equal Leg Angle 40x40x4mm Hot-Rolled
This is an equal leg angle profile made of hot-rolled alloy steel, with 40 mm leg length and 4 mm thickness, used for reinforcement in automotive chassis components. It falls under this tariff item as an angle of other alloy steel with a cross-section under 76 mm, not further worked than hot-rolled.
Alloy Steel Framework Angle 80x80x8mm
A hot-rolled equal angle profile from other alloy steel, 80x80x8 mm, used in industrial frameworks and racking systems. Its maximum dimension exceeds 76 mm, classifying it under 7228.70.00 as a shape or section of other alloy steel.
Alloy Steel Hat Channel 10x3x0.188
Hot-rolled hat-shaped channel section of alloy steel, 10-inch width for stud framing in construction. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and thus falls under tariff item 7228.70.00.
Alloy Steel HEA 200 Beam
European HEA profile hot-rolled alloy beam. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy Steel H-Pile Section 250x125
Hot-rolled H-section designed for piling foundations, alloy steel 250mm x 125mm, used in marine and deep foundations. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy Steel HSS Hollow Section 150x150x12mm Hot-Rolled
A hot-rolled hollow structural section (HSS) of alloy steel, square profile with 150 mm outer dimension, used for load-bearing columns in buildings. It is classified under 7228.70.00 as a shape or section of other alloy steel.
Alloy Steel Joist Section 12 Inch Depth
Hot-rolled bar joist shape of other alloy steel, 12-inch deep for floor support systems. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy Steel T-Section 125x125x12mm Hot-Rolled
A T-profile hot-rolled section from alloy steel, maximum dimension 125 mm, used for crane runway supports. It is classified under 7228.70.00 as a shape or section of other alloy steel, with no advanced processing.
Alloy Steel T-Section 200x100x8
Hot-rolled T-profile section from alloy steel, 200mm stem height, 100mm flange, 8mm thick, for roof trusses and flooring. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy Steel U-Channel 150x75x5.0
Hot-rolled U-section channel bar of alloy steel, 150mm height, 75mm width, 5mm thick, used for framing and supports. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy Steel U-Channel 6x2.5x0.25 Inch
Hot-rolled U-profile channel of other alloy steel, 6-inch depth with 1/4-inch flange thickness for heavy-duty framing. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy Steel Unequal Angle 200x100x15mm Hot-Rolled
An unequal leg L-angle from hot-rolled alloy steel, 200x100 mm profile exceeding 76 mm cross-section, used in shipbuilding. It is classified under 7228.70.00 as a shape or section of other alloy steel.
Alloy Steel Z-Purlin Section 8 Inch
Hot-rolled Z-shaped purlin profile of alloy steel for metal building roofs, 8-inch depth. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Alloy T-Bar 125x75x6
Hot-rolled T-section bar, alloy steel, for track supports. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
C-Channel Alloy Steel Beam 4x2x1/8
Hot-rolled C-shaped channel section of alloy steel with 4-inch height and 1/8-inch thickness, suitable for machinery supports. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Construction Grade Alloy Angle 90x90x10mm
An equal angle hot-rolled from other alloy steel for construction, 90 mm x 90 mm x 10 mm thick, used in building lintels and supports. Its 90 mm dimension exceeds 76 mm, placing it under 7228.70.00 as a shape or section of other alloy steel.
Heavy Alloy Steel Angle Iron 6x6x1/2
Extra-heavy hot-rolled equal angle of alloy steel, 6x6x1/2 inch for crane structures. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Heavy Alloy Steel I-Section 400x200
A heavy hot-rolled I-beam of alloy steel, with a 400 mm web height and 200 mm flanges, used in bridge girders and crane rails. Its cross-section and alloy composition place it under tariff item 7228.70.00 for angles, shapes and sections of other alloy steel.
Heavy Duty Alloy L-Bar 100x75x12mm Hot-Rolled
A hot-rolled unequal L-angle bar of alloy steel, 100x75 mm legs x 12 mm, used in heavy equipment fabrication. Its maximum cross-section of 100 mm exceeds 76 mm, classifying it under 7228.70.00 as a shape or section of other alloy steel.
Hot-Rolled Alloy L-Angle 30x30x3mm
This is a compact L-angle made of hot-rolled alloy steel, with a 30 mm cross-dimension, used in furniture framing and light machinery. It is classified here as an angle of other alloy steel with a small cross-section, not further worked than hot-rolled.
Hot-Rolled Alloy Steel H-Section 300x150
A hot-rolled H-section (wide flange beam) of alloy steel, 300 mm deep with 150 mm flanges, for heavy load-bearing in industrial buildings. Its shape and alloy content classify it under 7228.70.00 as an angle, shape or section of other alloy steel.
Hot-Rolled Alloy Steel HSS 2x2x0.125 Square Tube Section
Hollow structural square section (HSS) of alloy steel, hot-rolled 2x2 inch with 0.125-inch wall, used in building frameworks. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Hot-Rolled Alloy Steel I-Beam 200x100
A hot-rolled I-section beam made from alloy steel, measuring 200 mm in height and 100 mm in flange width, used in structural construction. It falls under 7228.70.00 as a hot-rolled section of other alloy steel.
Hot-Rolled Alloy Steel L-Angle 100x100x10mm
A hot-rolled L-shaped angle bar made from alloy steel with equal 100 mm legs and 10 mm thickness, featuring a maximum cross-sectional dimension over 76 mm. It is classified under 7228.70.00 as a hot-rolled angle of other alloy steel.
Hot-Rolled Alloy Steel L-Section 5x5x3/8
Equal-leg L-shaped angle section hot-rolled from other alloy steel, 5x5x3/8 inch for equipment bases. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.
Hot-Rolled Alloy Steel U-Channel 200x75x10mm
This is a hot-rolled U-shaped channel section made of alloy steel, measuring 200 mm in height with a maximum cross-section exceeding 76 mm. It is used as a structural beam in bridge construction. It falls under this tariff item as an angle, shape, or section of other alloy steel, not further worked than hot-rolled.
Hot-Rolled Alloy Steel Unequal Angle 200x100x16mm
An unequal leg hot-rolled angle bar of alloy steel, 200 mm x 100 mm x 16 mm thick, used in heavy machinery and shipbuilding. Its maximum dimension of 200 mm exceeds 76 mm, classifying it under 7228.70.00 as a shape or section of other alloy steel.
Hot-Rolled Alloy Steel Z-Purlin 150x50x3mm Thick
This is a Z-shaped purlin profile made of hot-rolled alloy steel, with a maximum dimension of 150 mm, used for roofing support in industrial buildings. It is classified here as an angle, shape, or section of other alloy steel, not further worked than hot-rolled.
Hot-Rolled L-Section Alloy Steel Angle 50x50x5mm
This is a hot-rolled L-shaped angle bar made from alloy steel with a maximum cross-sectional dimension of 50 mm, used in structural framing for machinery and equipment. It is classified under this tariff item as an angle of other alloy steel, not further worked.
Medium U-Section Alloy Steel 100x50
A hot-rolled U-channel of alloy steel, 100 mm x 50 mm, used for light framing and machinery guards. Its U-shape and alloy composition place it under 7228.70.00 as a shape or section of other alloy steel.
Structural Alloy I-Beam 250x125
A standard hot-rolled I-beam for buildings, made of alloy steel. Its I-shape and alloy content classify it under 7228.70.00 as an angle, shape or section of other alloy steel.
Structural Alloy L-Section 150x150x15mm
A hot-rolled L-angle structural section of other alloy steel, 150 mm legs x 15 mm thick, with a cross-section of 150 mm exceeding 76 mm. It is used in bridge and building construction and is classified under 7228.70.00 as a shape or section of other alloy steel.
Structural Alloy Steel Angle Bar 60x60x6mm
This is a hot-rolled unequal angle bar of alloy steel, with a maximum cross-section of 60 mm, used for building frameworks and supports. It falls under this tariff item as an angle of other alloy steel under 76 mm, not further worked than hot-rolled.
Structural Alloy Steel Tee Bar 4x4x0.5
Hot-rolled T-shaped structural section from alloy steel, 4x4 inch with 1/2-inch thickness for bridge components. This is an angle, shape, or section of other alloy steel, not further worked beyond hot rolling, and falls under tariff item 7228.70.00.