Duty Rate (from China)
Subheadings
Products classified under Tariff item 7227.90
100Cr6 Ball-Bearing Steel Hot-Rolled Coil Rod
Hot-rolled bars and rods in irregularly wound coils of 100Cr6 ball-bearing steel, containing approximately 1% carbon and 1.5% chromium. This product meets the ball-bearing steel definition in Chapter 72 note 1(h) with controlled carbon and chromium content. It is not tempered or partly manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.001.2379 Tool Steel Coils (X153CrMoV12)
Hot-rolled bars and rods of DIN 1.2379 cold work tool steel, containing approximately 1.55% carbon and 12% chromium, presented in irregularly wound coils. This product meets the definition of tool steel under Chapter 72 note 1(e)(i) as it contains more than 1.2% carbon and more than 10.5% chromium. It is not tempered, not chemically treated, and not further manufactured, making it classifiable under this tariff item for other alloy steel in coils.
7227.90.0052100 Modified Ball-Bearing Steel Coil
Hot-rolled, irregularly wound coils of modified 52100 ball-bearing steel, containing approximately 1% carbon and 1.5% chromium. This product meets the ball-bearing steel definition in Chapter 72 note 1(h) with tight controls on carbon, chromium, and tramp elements. It is not treated or tempered, and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00A2 Tool Steel Coil Stock
Hot-rolled, irregularly wound coils of A2 air-hardening tool steel, containing approximately 1% carbon and 5% chromium. This product meets the tool steel definition in Chapter 72 note 1(e)(ii) as it has at least 0.3% carbon and chromium content between 1.25% and 10.5%. It is not tempered, not chemically treated, and not partly manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00CPM-M4 Tool Steel Coil Rods
Hot-rolled, irregularly wound coils of CPM-M4 powder metallurgy tool steel, containing approximately 1.4% carbon, 4% chromium, 4% vanadium, and 4% molybdenum. This product meets the tool steel definition in Chapter 72 note 1(e)(i) and (v) due to its high carbon and chromium content. It is untreated and not further manufactured, making it classifiable under this tariff item for other alloy steel in coils.
7227.90.00Cru-Wear Tool Steel Coils
Hot-rolled, untreated coils of Cru-Wear powder metallurgy tool steel, containing approximately 1.1% carbon, 7.5% chromium, 1.6% vanadium, and 1.1% molybdenum. This product meets the tool steel definition in Chapter 72 note 1(e)(i) and (ii) due to its carbon and chromium content. It is presented in irregularly wound coils and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00D2 Tool Steel Hot-Rolled Coil
Hot-rolled bars and rods of D2 alloy tool steel, containing approximately 1.5% carbon and 12% chromium, presented in irregularly wound coils. This product meets the tool steel definition in Chapter 72 note 1(e)(i) as it has more than 1.2% carbon and more than 10.5% chromium. It is not tempered, not surface treated, and not partly manufactured, making it classifiable under this tariff item for other alloy steel in coils.
7227.90.00F2 Tool Steel Hot-Rolled Rod Coils
Hot-rolled, irregularly wound coils of F2 finishing tool steel, containing approximately 0.95% carbon, 0.3% manganese, 0.9% chromium, and 0.9% molybdenum. This product meets the tool steel definition in Chapter 72 note 1(e)(iv) due to its chromium and molybdenum content. It is not treated and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00K390 PM Tool Steel Coils
Hot-rolled, untreated coils of K390 powder metallurgy tool steel, containing approximately 1.6% carbon, 9% chromium, 4% vanadium, 1.9% molybdenum, and 2.5% tungsten. This product meets the tool steel definition in Chapter 72 note 1(e)(i) and (v) due to its high carbon and chromium content. It is presented in irregularly wound coils and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00L6 Tool Steel Hot Band Coils
Hot-rolled, irregularly wound coils of L6 shock tool steel, containing approximately 0.7% carbon, 0.6% manganese, 1.5% nickel, and 1% chromium. This product meets the tool steel definition in Chapter 72 note 1(e)(ii) and (iii) due to its carbon and chromium content. It is not tempered or treated, and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00M2 High-Speed Tool Steel Alternative Coil
Hot-rolled, irregularly wound coils of H13 hot-work tool steel, containing approximately 0.4% carbon, 5% chromium, 1.3% molybdenum, and 1% silicon. This product meets the tool steel definition in Chapter 72 note 1(e)(ii) and (iv) due to its carbon, chromium, and molybdenum content. It is not treated and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00O1 Tool Steel Hot-Rolled Coil Rods
Hot-rolled rods in irregularly wound coils of O1 oil-hardening tool steel, containing approximately 0.9% carbon, 1% manganese, and 1% chromium. This product meets the tool steel definition in Chapter 72 note 1(e)(iii) as it has at least 0.85% carbon and manganese content between 1% and 1.8%. It is untreated and not partly manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00S7 Tool Steel Hot-Rolled Coils
Hot-rolled, irregularly wound coils of S7 shock-resisting tool steel, containing approximately 0.5% carbon, 3.25% chromium, and 1.4% molybdenum. This product meets the tool steel definition in Chapter 72 note 1(e)(iv) as it has chromium content between 0.9% and 1.2% and molybdenum content between 0.9% and 1.4%. It is untreated and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00Silver Steel Tool Rod Coils
Hot-rolled, irregularly wound coils of silver steel, containing approximately 1% carbon and 1.5% chromium. This product meets the tool steel definition in Chapter 72 note 1(e)(ii) as it has at least 0.3% carbon and chromium content between 1.25% and 10.5%. It is untreated and not further manufactured, so it falls under this tariff item for other alloy steel in coils.
7227.90.00W1 Tool Steel Water-Hardening Coils
Hot-rolled, irregularly wound coils of W1 water-hardening tool steel, containing approximately 1.0% carbon and low alloy content. This product meets the tool steel definition in Chapter 72 note 1(e)(i) and (iii) due to its high carbon content. It is untreated and not further manufactured, so it falls under this tariff item for other alloy steel in coils.