Galvanized Alloy Steel Soffit Strip
Zinc-coated alloy steel for aluminum soffit system trim strips, under 600 mm wide. The alloy composition and narrow width place it under 7226.99.00 as other flat-rolled alloy steel.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7225000000–7229999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the width were 600 mm or more
Flat-rolled alloy steel of width 600 mm or more falls under heading 7225.
If the steel were non-alloy
Non-alloy steel strip with zinc coating is classified in heading 7212.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the alloy composition and width under 600 mm to support classification
• Keep mill certificates for CBSA
• Declare the zinc coating as galvanized
Related Products under Tariff item 7226.99.00
25CrMo4 Pressure Vessel Alloy Strip
25CrMo4 alloy steel strip, 280 mm wide and 3.2 mm thick, normalized for pressure vessel fabrication. It is a flat-rolled product of other alloy steel (chromium-molybdenum) with a width of less than 600 mm, not further worked than hot-rolled or cold-rolled, and not coated or plated. This falls under tariff item 7226.99.00 as 'Other' flat-rolled products of other alloy steel.
30CrNiMo8 Heavy Duty Alloy Sheet
30CrNiMo8 high-strength alloy steel sheet, 520 mm wide and 4.2 mm thick, for crane hooks. It is a flat-rolled product of other alloy steel (nickel-chromium-molybdenum) with a width under 600 mm, not further worked than hot-rolled or cold-rolled. This falls under tariff item 7226.99.00 as 'Other' flat-rolled products of other alloy steel.
34CrNiMo6 Alloy Steel Strip
34CrNiMo6 nitriding alloy steel strip, 420 mm wide and 1.6 mm thick, for shafts. It is a flat-rolled product of other alloy steel (chromium-nickel-molybdenum) with a width under 600 mm, not further worked than hot-rolled or cold-rolled. This falls under tariff item 7226.99.00 as 'Other' flat-rolled products of other alloy steel.
41Cr4 Alloy Steel Band
41Cr4 chromium alloy steel band, 250 mm wide and 3.5 mm thick, for fasteners. It is a flat-rolled product of other alloy steel (chromium) with a width under 600 mm, not further worked than hot-rolled or cold-rolled. This falls under tariff item 7226.99.00 as 'Other' flat-rolled products of other alloy steel.
50CrMo4 Quenched Alloy Steel Strip
50CrMo4 alloy steel strip, quenched and tempered, 350 mm wide and 2 mm thick, for hydraulic cylinder rods. It is a flat-rolled product of other alloy steel (chromium-molybdenum) with a width under 600 mm. Heat treatment such as quenching and tempering is not considered 'further working' that changes classification, so it falls under tariff item 7226.99.00 as 'Other' flat-rolled products of other alloy steel.
6150 Spring Alloy Steel Strip
6150 chromium-vanadium alloy steel strip, cold-rolled, 200 mm wide and 1.2 mm thick, for automotive leaf springs. It is a flat-rolled product of other alloy steel (chromium-vanadium) with a width under 600 mm, not further worked than cold-rolled. This falls under tariff item 7226.99.00 as 'Other' flat-rolled products of other alloy steel.