Incoloy 800H Hot-Rolled Alloy Steel Plate
Incoloy 800H is a high-nickel (over 30% Ni) alloy steel plate, hot-rolled to a thickness of 4.75 mm or more and a width exceeding 600 mm, supplied in straight lengths. It is used in high-temperature applications such as furnace components and heat exchangers. The product is not further worked beyond hot rolling, so it falls under tariff item 7225.40.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plate is supplied in coils
Hot-rolled alloy steel in coils is classified under this alternative.
If the plate is cold-rolled
Cold-rolled alloy steel plates are classified separately.
If the plate is further worked, such as by annealing
Further working beyond hot rolling would move the product to this alternative.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Submit the mill test certificate showing the nickel content (over 30%) and the hot-rolled condition
• Ensure the plate dimensions meet the width and thickness requirements for this tariff item
• Be aware that the product may be subject to additional safety standards for high-temperature applications, but these do not affect tariff classification
Related Products under Tariff item 7225.40.00
1.4435 Austenitic Alloy Steel Plate
DIN 1.4435 is an austenitic stainless steel plate (316L equivalent), hot-rolled, with thickness 4.75 mm or more and width 600 mm or more, not in coils. Although stainless, it is classified as other alloy steel under 7225.40.00 when not meeting stainless steel definitions in Chapter 72. It is not further worked than hot-rolled.
15CrMoG Seamless Pipe Alloy Steel Plate Stock
15CrMoG is a chromium-molybdenum alloy steel plate used as stock for seamless pipe production, hot-rolled, with thickness ≥ 4.75 mm and width ≥ 600 mm, not coiled. It is certified for high-pressure service. It is classified under 7225.40.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled.
4140 Chromium-Molybdenum Alloy Steel Plate
4140 is a chromium-molybdenum alloy steel hot-rolled plate, with thickness ≥ 4.75 mm and width ≥ 600 mm, not coiled, not further worked than hot-rolled. It is a general-purpose alloy steel. It is classified under 7225.40.00 as a flat-rolled product of other alloy steel, width 600 mm or more.
52100 Ball Bearing Tool Steel Hot-Rolled
Hot-rolled flat-rolled product of 52100 chrome alloy tool steel, 4.9 mm thick and 950 mm wide, not in coils and not further worked than hot-rolling. This product meets the definition of other alloy steel under Chapter 72 note 1(f) and is classified as a flat-rolled product of a width exceeding 600 mm.
A2 Tool Steel Hot-Rolled Plate 10mm Thick
A2 tool steel hot-rolled plate, 10 mm thick and 700 mm wide, not in coils and not further worked beyond hot-rolling. A2 is an air-hardening tool steel with 1% carbon and 5% chromium, making it an alloy steel. It is classified under 7225.40.00 as a flat-rolled product of other alloy steel, width 600 mm or more, not further worked than hot-rolled.
A2 Tool Steel Hot-Rolled Sheet
Hot-rolled A2 air-hardening tool steel plate, 5 mm thick and 1000 mm wide, not in coils and not further worked. This product qualifies as other alloy steel under Chapter 72 note 1(f) and is a flat-rolled product of a width exceeding 600 mm.