Incoloy 800 Semi-Finished Billets
Incoloy 800 semi-finished billets are high-nickel alloy steel products with over 30% nickel, used in high-temperature applications such as heat exchangers. They fall under tariff item 7224.90.00 as other alloy steel semi-finished products, being in billet form for further processing.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product is in ingot form rather than billet
Ingots are a separate primary form under heading 72.24.
If the billets are hollow drill bars or rods
Hollow drill bars and rods are specifically classified under heading 72.28.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the billets are not further worked than hot-rolled or forged, as additional processing may change the tariff classification
• Keep records of the nickel content (over 30%) to support the high-nickel alloy steel classification
• Confirm whether the billets are for use in pressure equipment, which may require technical standards compliance
Related Products under Tariff item 7224.90.00
15CrMoG Boiler Tube Billet
15CrMoG low-alloy steel billets, a chromium-molybdenum grade per Chinese standard, are semi-finished products of other alloy steel. They are intended for further processing into high-pressure boiler tubes and are not yet in the form of finished tubes or pipes.
1.6582 (18NiCrMo5) Alloy Steel Bloom
DIN 1.6582 (18NiCrMo5) alloy steel blooms are semi-finished products of case-hardening nickel-chromium-molybdenum steel. They are supplied in bloom form for subsequent rolling or forging into automotive transmission components.
34CrNiMo6 Gear Steel Billet
EN 34CrNiMo6 alloy steel billets are semi-finished products of nickel-chromium-molybdenum case-hardening steel. They are used for large gears and crankshafts and are supplied in billet form before further hot-working.
A2 Tool Steel Rectangle Slab
A2 tool steel rectangle slab, a semi-finished product of other alloy steel, with a rectangular cross-section where the width exceeds four times the thickness. It is air-hardening and used for shear blades and punches. This product falls under tariff item 7224.90.00 as it is a semi-finished product of other alloy steel, not further worked than hot-rolled or forged.
A2 Tool Steel Square Billet
A2 tool steel square billet is a semi-finished product with a square cross-section, width/thickness ratio under 4:1, primarily for forging into punches and shear blades. It is classified under tariff item 7224.90.00 as other alloy steel semi-finished products, given its tool steel composition.
AISI 316 Modified Alloy Billet
Modified AISI 316 alloy steel billets, with a chromium content below 10.5%, do not meet the definition of stainless steel. They are semi-finished products of other alloy steel, intended for pressure vessel applications.