H13 Tool Steel Square Semi-Finished
H13 tool steel square semi-finished is a hot work tool steel in square form, width/thickness ratio under 4:1, for die casting molds. It falls under tariff item 7224.90.00 as other alloy steel semi-finished products, given its chromium/molybdenum content.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the semi-finished has been further hot-rolled into bars
Further processing into bars would move the product to heading 72.28.
If the product is in ingot form
Ingots are classified separately from semi-finished products under heading 72.24.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the semi-finished product is not further worked than hot-rolled or forged, as additional processing may change classification
• Keep documentation of the chromium and molybdenum content to support the tool steel classification
• Verify the dimensions meet the semi-finished product definition under Chapter 72
Related Products under Tariff item 7224.90.00
15CrMoG Boiler Tube Billet
15CrMoG low-alloy steel billets, a chromium-molybdenum grade per Chinese standard, are semi-finished products of other alloy steel. They are intended for further processing into high-pressure boiler tubes and are not yet in the form of finished tubes or pipes.
1.6582 (18NiCrMo5) Alloy Steel Bloom
DIN 1.6582 (18NiCrMo5) alloy steel blooms are semi-finished products of case-hardening nickel-chromium-molybdenum steel. They are supplied in bloom form for subsequent rolling or forging into automotive transmission components.
34CrNiMo6 Gear Steel Billet
EN 34CrNiMo6 alloy steel billets are semi-finished products of nickel-chromium-molybdenum case-hardening steel. They are used for large gears and crankshafts and are supplied in billet form before further hot-working.
A2 Tool Steel Rectangle Slab
A2 tool steel rectangle slab, a semi-finished product of other alloy steel, with a rectangular cross-section where the width exceeds four times the thickness. It is air-hardening and used for shear blades and punches. This product falls under tariff item 7224.90.00 as it is a semi-finished product of other alloy steel, not further worked than hot-rolled or forged.
A2 Tool Steel Square Billet
A2 tool steel square billet is a semi-finished product with a square cross-section, width/thickness ratio under 4:1, primarily for forging into punches and shear blades. It is classified under tariff item 7224.90.00 as other alloy steel semi-finished products, given its tool steel composition.
AISI 316 Modified Alloy Billet
Modified AISI 316 alloy steel billets, with a chromium content below 10.5%, do not meet the definition of stainless steel. They are semi-finished products of other alloy steel, intended for pressure vessel applications.