Other
A live specimen of the mongoose family, including Galidia, Galidictis, Mungotictis, Salanoia, Suricata, Herpestes, Helogale, Donogale, Atilax, Mungos, Crossarchus, Liberiictics, Ichneumia, Bdeogale, Rhynchogale, Cynictis, Paracynictis and Cryptoprocta, unless the Minister of Public Safety and Emergency Preparedness is satisfied, in accordance with the written advice of the Canadian Wildlife Service, that the specimen is imported for breeding, study or exhibition purposes, in confinement, by zoological institutions approved by the Canadian Wildlife Service; A live bird of the Starling family (Sturnidae), other than (a) the European Starling (Sturnus vulgaris) and the Chinese Talking or Hill Mynah (Gracula religiosa), or (b) Rothschilds or Bali Mynah (Leucopsar rothschildi) for propagation purposes; Any other non-game bird, other than (a) a domestic bird of a kind kept for food purposes, (b) a bird intended solely for exhibition in a public zoological park, or (c) a bird intended solely to be kept in confinement in a cage or to be used for purposes of public entertainment; Aigrettes, egret plumes or so-called osprey plumes and the feathers, quills, heads, wings, tails, skins, or parts of skins of wild birds, either raw or manufactured, other than (a) the feathers or plumes of ostriches, the plumage of the English pheasant, the Indian peacock, birds imported alive, or of wild birds of groups recognized as game birds in an Act of Parliament or of the legislature of a province relating to game under which an open season is provided, or (b) specimens imported, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, for any museum or for scientific or educational purposes; Base or counterfeit coins; Used or second-hand mattresses or materials therefrom, other than (a) mattresses imported under tariff item No. 9805.00.00, 9806.00.00, 9807.00.00, 9808.00.00 or 9810.00.00, or (b) materials from used or second hand mattresses, when imported after having been cleaned and fumigated, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, accompanied by such certificates as are designated by the Minister of Public Safety and Emergency Preparedness; Reprints of Canadian copyrighted works and reprints of British copyrighted works that have been copyrighted in Canada; Goods manufactured or produced wholly or in part by prison labour; Goods mined, manufactured or produced wholly or in part by forced labour; Smoke screen apparatus for use on motor vehicles or on vessels of Chapter 89; Used or second-hand motor vehicles of all kinds, manufactured prior to the calendar year in which importation into Canada is sought to be made, other than motor vehicles (a) imported under tariff item No. 9801.10.10, 9801.10.20, 9801.10.30, 9807.00.00, 9808.00.00 or 9810.00.00, (b) imported by a settler on the settler's first arrival but not entitled to be classified under tariff item No. 9807.00.00, (c) forfeited or confiscated for any offence under the Customs laws, or the laws of any province of Canada, (d) left by bequest, (e) imported from the United States, (f) imported from Mexico (i) in the 2009 or 2010 calendar year, if the motor vehicles are not less than ten years old, (ii) in the 2011 or 2012 calendar year, if the motor vehicles are not less than eight years old, (iii) in the 2013 or 2014 calendar year, if the motor vehicles are not less than six years old, (iv) in the 2015 or 2016 calendar year, if the motor vehicles are not less than four years old, (v) in the 2017 or 2018 calendar year, if the motor vehicles are not less than two years old, or (vi) on or after January 1, 2019; Used or second-hand aircraft of all kinds, other than aircraft (a) classified under tariff item No. 9803.00.00 or 9810.00.00, civil aircraft of heading 88.01 or 88.02, or aircraft engaged solely in international traffic, (b) forfeited or confiscated for any offence under any Act of Parliament relating to customs, the Air Regulations or an Act of the legislature of any province, (c) imported by the Department of National Defence for military purposes, or (d) imported from the United States; White phosphorus matches; Any goods, in association with which there is used any description that is false in a material respect as to the geographical origin of the goods or the importation of which is prohibited by an order made under the Trade-marks Act. > Other: > Other
Duty Rate (from China)
Products classified under Tariff item 7218.99.00.90
17-4 PH Precipitation Hardening Stainless Square Stock
A 17-4 PH (17-4-4) martensitic precipitation hardening stainless steel square semi-finished stock with a cross-sectional area under 232 cm², for aerospace components. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel.
7218.99.0017-4 PH Stainless Steel Round Billet
A precipitation-hardening stainless steel billet with a circular cross-section of 150 mm diameter, used as a primary input for aerospace forgings. It is a semi-finished product of stainless steel, not further worked than cast or roughly shaped, falling under tariff item 7218.99.00 as 'Other' semi-finished stainless steel products.
7218.99.00316L Stainless Steel Bloom
A semi-finished rectangular stainless steel bloom of 316L grade (16-18% Cr, 10-14% Ni, low carbon), typically 200x200 mm cross-section, for further hot working into plates or structural shapes. It is a primary form of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel.
7218.99.00316Ti Stabilized Stainless Square Billet
A 316Ti stabilized stainless square billet with a cross-sectional area under 232 cm², for welded structures. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, resistant to weld decay.
7218.99.00321 Stainless Steel Forging Billet
A stabilized 321 stainless steel billet (18% Cr, 10% Ni, Ti addition) for high-temperature exhaust components. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, preventing carbide precipitation during welding.
7218.99.00409 Stainless Steel Semi-Finished Round
A ferritic 409 stainless steel round semi-finished stock, 120 mm diameter, for exhaust tubing. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, suitable for automotive exhaust applications.
7218.99.00430 Ferritic Stainless Steel Square Billet
An AISI 430 ferritic stainless square billet with a cross-sectional area under 232 cm², for automotive trim and appliances. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, with 17% chromium and magnetic properties.
7218.99.00430 Stainless Steel Semi-Finished Block
A ferritic 430 stainless steel block (16-18% Cr), rectangular 250x150 mm, for automotive trim production. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, offering an economical magnetic stainless grade.
7218.99.00AISI 304 Square Stainless Steel Semi-Finished Roundel
Cut-to-length AISI 304 square stainless semi-finished roundels with a cross-sectional area under 232 cm², for machining. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, precision cut billets.
7218.99.00AISI 304 Stainless Steel Billet
A square solid section of AISI 304 stainless steel, typically 100-150 mm across, used as a primary input for forging or rolling into bars and sheets. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel.
7218.99.00AISI 304 Stainless Steel Square Billet
A semi-finished square billet made from AISI 304 austenitic stainless steel with a cross-sectional area under 232 cm², typically used for hot rolling into bars or wire rods. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel.
7218.99.00AISI 310 Stainless Steel Slab
A high-temperature AISI 310 stainless slab (25% Cr, 20% Ni), 250 mm thick, for furnace parts. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, with heat-resisting properties per Chapter Note 1.
7218.99.00Custom 450 Stainless Billet
A martensitic Custom 450 stainless billet (15% Cr, 6% Ni, 1% Mo) for pump shafts. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, precipitation hardenable for high-strength applications.
7218.99.00Duplex 2205 Stainless Steel Slab
A thick semi-finished slab of duplex 2205 stainless steel (22% Cr, 5% Ni, 3% Mo), approximately 200-300 mm thick, for hot rolling into heavy plates used in oil & gas. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel.
7218.99.00Monel 400 Equivalent Stainless Billet
A Ni-Cu stainless equivalent to Monel 400, semi-finished billet for marine propeller shafts. It is a semi-finished product of stainless steel, not further worked, classified under tariff item 7218.99.00 as 'Other' semi-finished stainless steel, offering excellent seawater corrosion resistance.