Cold-Finished Low Carbon Roller Shaft 76 mm
This is a cold-finished roller shaft bar made of non-alloy steel with less than 0.25% carbon, measuring exactly 76 mm in diameter. It is classified under tariff item 7215.50.00 because it is a solid bar of iron or non-alloy steel that has been cold-formed or cold-finished and is not further worked. The diameter falls within the lower limit of the size range specified for this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the shaft has been machined with keyways, threads, or other features
Machining beyond cold-forming would place the product in this subheading.
If the shaft is part of a transmission system and imported with bearings or gears
Transmission shafts are classified in Chapter 84.
If the shaft is used as a structural support in construction
Structural articles of iron or steel are classified in Chapter 73.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the bar's diameter is at least 76 mm and that it is solid, not hollow, to qualify for this tariff item
• Keep documentation showing the steel's carbon content is below 0.25%
• If the shaft is cut to length or has keyways, it may no longer be considered 'not further worked.'
Related Products under Tariff item 7215.50.00
Cold-Drawn Low Carbon Steel Piston Rod 120 mm
This is a cold-drawn piston rod made of low-carbon non-alloy steel, measuring 120 mm in diameter, intended for use in pneumatic systems. It is classified under tariff item 7215.50.00 because it is a bar of iron or non-alloy steel that has been cold-formed or cold-finished and has not undergone any further working. The product's dimensions and carbon content (less than 0.25%) align with the scope of this tariff item.
Cold-Drawn Round Steel Rod 3/8 Inch Diameter
Cold-drawn round rod of low-carbon non-alloy steel, 3/8 inch diameter, used for shafts and pins. The cold-drawing process imparts a smooth surface and precise dimensions, and the product is not further worked beyond this cold-forming operation.
Cold-Drawn Steel Axle Blank
A cold-drawn steel axle blank, 25.4 mm in diameter, made of non-alloy steel with less than 0.25% carbon. It is supplied as a blank for small vehicle axles and has not been further worked beyond cold-forming or cold-finishing. This product falls under tariff item 7215.50.00 as other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished.
Cold-Drawn Steel Bushings Stock
Cold-drawn non-alloy steel rod stock intended for machining into plain bearings and bushings. The product is supplied as a cold-finished bar with a specific chemistry for bearing surfaces, and is not further worked beyond the drawing process.
Cold-Drawn Steel Ground Stock
Cold-drawn and centerless ground non-alloy steel rod used as shafting stock. The primary cold-drawing operation qualifies the product as cold-finished, and the light grinding does not constitute further working that would change its essential character.
Cold-Drawn Steel Guide Rod
A cold-drawn steel guide rod, 32 mm in diameter, made of non-alloy steel with less than 0.25% carbon, used for linear motion guides. It has a precision diameter tolerance and is not further worked than cold-formed or cold-finished. This product is classified under tariff item 7215.50.00 as other bars and rods of iron or non-alloy steel.