MR Type Tinplate for General Line Cans
MR (matte/reflow) type electrolytic tinplate coils under 600 mm wide, used for non-food general line containers. These are flat-rolled non-alloy steel products plated with tin, with a matte or reflow finish.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil width is 600 mm or more
Tin-plated coils of 600 mm or more in width are classified under heading 7210.
If coated with lacquer or other organic substances
Flat-rolled products under 600 mm with organic coatings are classified elsewhere.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil width is under 600 mm and the product is tin-plated non-alloy steel
• Document the MR finish and the intended use for general line containers
• Verify the product has not been further processed into articles
Related Products under Tariff item 7212.10.00
Double Reduced Tinplate for 3-Piece Cans
Double reduced electrolytic tinplate in widths under 600 mm, produced by a second cold reduction pass to achieve DR-8 to DR-10 temper grades. These flat-rolled non-alloy steel sheets are plated with tin and are used to form welded three-piece can bodies.
Electrolytic Chromium Coated NOT - Tin Free
Tin-coated mild steel sheets under 600 mm wide, used for cylindrical battery cases. These are flat-rolled non-alloy steel products plated with tin, providing corrosion resistance for battery applications.
Electrolytic Tinplate for Beverage Cans
Electrolytic tinplate sheets under 600 mm wide, made of flat-rolled non-alloy steel and plated on both sides with tin for corrosion resistance. These sheets are used in the manufacture of beverage can ends and bodies.
ETP Tinplate Coils for Aerosol Cans
Electrolytic tin-plated (ETP) steel coils with widths between 500 and 590 mm, in lightweight gauges suitable for forming aerosol container bodies. These are flat-rolled non-alloy steel products plated with tin.
Hot-Dip Tin Coated Steel Sheets
Hot-dip tin coated non-alloy steel sheets under 600 mm wide, produced by passing steel through a molten tin bath. The coating method does not affect classification, as the item covers any tin-plated flat-rolled product.
Narrow Tin Coated Lock Former Quality
Tinplate of lock former quality (LFQ) grade, under 600 mm wide, designed for Pittsburgh lock seam fabrication. These are flat-rolled non-alloy steel products plated with tin, with properties suited for forming interlocking seams.