Galvanized Electrolytic Steel Sheet for Automotive Panels
Galvanized electrolytic steel sheets for automotive panels are flat-rolled non-alloy steel products, over 600 mm wide, with a corrosion-resistant zinc coating applied by electrolysis. These sheets are specifically used in car body panels, where uniform coating thickness and surface quality are critical. They are classified under 7210.70.00 because the electrolytic zinc coating is considered a form of 'coated with plastics' in the Canadian tariff schedule.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the zinc coating is applied by hot-dip galvanizing
Hot-dip galvanized sheets are classified separately from electrolytically coated ones.
If the steel is uncoated and cold-rolled
Uncoated cold-rolled steel sheets fall under a different heading.
If the steel is less than 600 mm wide
Narrower flat-rolled steel products are classified under heading 7212.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the steel width exceeds 600 mm and that the zinc coating is electrolytically applied, as hot-dip coated products are classified elsewhere
• Keep documentation such as the coating process description and chemical composition analysis ready for CBSA inspection
• Check if the automotive end-use qualifies for any duty relief or remission programs under Canadian trade policy
Related Products under Tariff item 7210.70.00
Appliance-Grade Painted Steel for Washing Machines
Non-alloy steel sheet, over 600 mm wide, with a white baked-on paint finish for washing machine exteriors. This product is classified under tariff item 7210.70.00 as it is flat-rolled steel coated with paint, not with metal.
Architectural Powder Coated Steel Panels
Wide non-alloy steel sheets with thermoset powder coating (polyester-epoxy hybrid) for curtain wall systems. This product is classified under 7210.70.00 as it is coated with plastics, not with metal.
Automotive Grade Electrogalvanized Steel Panels
Automotive grade electrogalvanized steel panels are high-quality electrolytic zinc-coated steel sheets exceeding 600 mm in width, designed for exposed automotive exterior panels. The electrolytic plating provides a corrosion-resistant surface, and the product is classified under tariff item 7210.70.00 as flat-rolled steel coated with a metallic layer, which is then painted or coated with plastics.
Automotive Grade Painted Steel Panels
Non-alloy steel flat sheets exceeding 600 mm width with e-coat primer and base color for automotive body panel stock. This product falls under 7210.70.00 as it is painted, not metal-plated or clad.
Baked Enamel Steel Coil for Electrical Cabinets
Non-alloy steel flat-rolled coil, over 600 mm wide, with a baked enamel coating for electrical enclosure panels. This product falls under 7210.70.00 because it is coated with paint, not with metal or plastic.
Color-Coated Steel for Appliance Exteriors
Non-alloy steel flat-rolled products over 600 mm wide, coated with colored acrylic-polyurethane paint system for refrigerator and washer exteriors. This product is classified under 7210.70.00 as it is painted, not metal-coated.