0.5% Carbon Round Ingot Casting
A cylindrical semi-finished steel ingot with 0.5% carbon content and circular cross-section, produced by continuous casting for rerolling. It is not further worked than primary hot-rolling or roughly shaped by forging. It falls under 7207.20.00 as a semi-finished product of non-alloy steel containing 0.25% or more carbon.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the ingot is remelting scrap ingots with obvious surface faults
Remelting scrap ingots of iron or steel are classified under heading 72.04, not 72.07.
If the product is an ingot of non-alloy steel in primary form
Ingots of iron or non-alloy steel are classified under heading 72.06.
If the steel contains alloying elements exceeding non-alloy limits
Semi-finished alloy steel products fall under heading 72.24.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the ingot is not classifiable as pig iron or spiegeleisen under heading 72.01, which have different carbon limits
• Document the casting process and carbon content in shipping papers to support classification
• If the ingot has been remelted or further processed, check if it qualifies as remelting scrap ingots under heading 72.04
Related Products under Tariff item 7207.20.00
0.25% Carbon Threshold Billet
Precision-controlled carbon steel billets exactly at the 0.25% carbon boundary, used as semi-finished products for further rolling or forging. They are non-alloy steel and meet the tariff item's carbon content threshold of 0.25% or more by weight.
0.28% Carbon Rectangular Steel Semifinished for Rails
A semi-finished rectangular carbon steel product with a 0.28% carbon content, where the width is at least four times the thickness. This non-alloy steel is intended for rolling into railway track sections.
0.30% Carbon Steel Forging Billets
Billets with 0.30% carbon content for open-die forging of flanges and rings, with square or round cross-sections. They are semi-finished products of non-alloy steel, not further worked than primary hot-rolling or roughly shaped by forging. They fall under 7207.20.00 as other semi-finished products of non-alloy steel containing 0.25% or more carbon.
0.32% Carbon Steel Blooms for Heavy Forgings
Large rectangular blooms of 0.32% carbon non-alloy steel, with a width measuring at least four times the thickness. These semi-finished products are designed for open-die heavy forging applications.
0.35% Carbon Forging Billet
A circular cross-section billet with a 0.35% carbon content, used for open-die forging applications in automotive parts. This non-alloy steel product is semi-finished and has not been further worked.
0.35% Carbon Steel Slabs
Flat rectangular slabs of non-alloy steel with 0.35% carbon content, destined for hot-rolled sheet production. They are semi-finished products, not further worked than primary hot-rolling or roughly shaped by forging. They are classified under 7207.20.00 as other semi-finished products of non-alloy steel containing 0.25% or more carbon.