Cut Pressure Vessel Plate Scrap
Cut pressure vessel plate scrap consists of reject plates and trimmings from ASME SA-516 Grade 70 normalized steel fabrication, ranging from 1 to 4 inches thick. These pieces are no longer usable as finished vessels and are destined for remelting, which qualifies them as ferrous waste and scrap under tariff item 7204.49.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the scrap is predominantly stainless steel
Stainless steel waste and scrap is classified separately from other ferrous scrap.
If the scrap is tinned or coated
Tinned or coated iron or steel scrap has its own tariff item.
If the scrap is from cast iron
Cast iron waste and scrap is classified under a different item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the scrap is clearly cut and not in the form of finished vessels, as intact items fall under other headings
• Provide a mill certificate or analysis showing the SA-516 Grade 70 composition to support classification
• Verify with the CBSA that the material is not subject to any environmental import restrictions
Related Products under Tariff item 7204.49.00
Building Girder End Cut Scrap
Precision-cut ends from wide flange steel girders used in high-rise construction, ASTM A992 grade, 12-24 inch depths. This structural building scrap is intended for remelting into new beams and is classified under tariff item 7204.49.00 as other ferrous waste and scrap.
Cut Heavy Machinery Frame Scrap
Torch-cut fragments from dismantled industrial crane and excavator frames, typically S355 structural steel grade, 10-30mm thick. This cut plate and structural scrap is intended for remelting and is classified under tariff item 7204.49.00 as other ferrous waste and scrap.
Cut Shipbuilding Steel Plate Scrap
Cut shipbuilding steel plate scrap comprises cut pieces from heavy steel plates used in hull construction, typically 20-50mm thick with high tensile strength. These pieces are no longer usable as ship parts and are intended for remelting, classifying them as ferrous waste and scrap under tariff item 7204.49.00.
Cut Ship Hold Frame Scrap
Cut ship hold frame scrap consists of internal framing plates and stiffeners cut from vessel double bottoms and bulkheads, made of ABS Grade AH36 ship steel. These pieces are no longer usable as ship components and are destined for remelting, qualifying as ferrous waste and scrap under tariff item 7204.49.00.
Cut Storage Tank Bottom Scrap
Cut storage tank bottom scrap comprises floor plate sections cut from decommissioned petroleum storage tanks, made of ASTM A36 mild steel, 1/2 inch thick with rolled edges. These sections are no longer usable as tank parts and are intended for remelting, classifying them as ferrous waste and scrap under tariff item 7204.49.00.
Cut Transmission Tower Scrap
Cut transmission tower scrap consists of angle iron and lattice sections cut from retired electrical transmission towers, made of ASTM A572 Grade 65 high-strength low-alloy steel. These sections are no longer usable as tower components and are destined for remelting, qualifying as ferrous waste and scrap under tariff item 7204.49.00.