Ferrosilicon 65/70 Grade Lumps
Ferrosilicon lumps with 65-70% silicon content, used in foundries for deoxidation during iron casting. This product falls under this tariff item as 'other' ferrosilicon, not meeting the specifications for other subheadings.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the silicon content is less than 55%
Ferrosilicon with lower silicon content is classified separately.
If magnesium content exceeds 4%
High magnesium content changes the classification to ferro-silico-magnesium.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the silicon content and size range (10-50mm) on the commercial invoice
• Ensure the product is free of contaminants to avoid delays
• Check for any applicable trade remedies
Related Products under Tariff item 7202.29.00
Atomized Ferrosilicon Powder
Atomized ferrosilicon powder with 75% silicon content, produced by atomization and used in powder metallurgy and welding electrodes. It retains the essential character of ferrosilicon as a ferro-alloy, and atomization does not alter its classification under this tariff item.
Atomized Ferrosilicon Powder 75%
Atomized ferrosilicon powder 75% is a finely atomized ferrosilicon powder with 75% silicon content, used in powder metallurgy and as a raw material for silicon-based compounds. Despite its powder form, it is classified under tariff item 7202.29.00 as 'other' ferro-silicon, as the powder form is not considered 'further working' per the chapter notes.
Crushed Ferrosilicon 10-50mm
Crushed ferrosilicon 10-50mm is crushed ferrosilicon lumps sized 10-50mm from 75% standard grade, optimized for submerged arc furnace feeding. It remains classified under tariff item 7202.29.00 as 'other' ferro-silicon, as crushing is not considered 'further working' per the chapter notes.
Ductile Iron FeSiMg 12% Magnesium Alloy
Ductile iron FeSiMg 12% magnesium alloy is a specialty ferrosilicon magnesium alloy containing 12% magnesium, used as a nodulizing agent in ductile iron production. It is supplied in standard foundry granules. This product falls under tariff item 7202.29.00 as 'other' ferro-silicon because its magnesium content exceeds 2% by weight, which is not covered by other subheadings of heading 72.02.
Electrolytic Ferrosilicon 85%
Electrolytic ferrosilicon 85% is a high-grade ferrosilicon produced via electrolytic process for ultra-low impurity levels in ESR steelmaking. It is classified under tariff item 7202.29.00 as 'other' ferro-silicon, as it does not meet the specifications of other subheadings and is compatible with vacuum arc remelting.
Ferrosilicon 65% Foundry Grade
Ferrosilicon 65% foundry grade is a ferrosilicon alloy with 65% silicon specifically blended for foundry applications in ductile iron production, aiding nodulization. It is classified under tariff item 7202.29.00 as 'other' ferro-silicon since it does not match specific subheadings for higher silicon content.