Open Weave Glass Fiber Lighting Diffuser Fabric
An open weave glass fiber fabric for diffusing light in commercial lighting fixtures. It is plain weave, uncolored, with filaments of 136 tex or less, weighing under 250 g/m², and exceeding 30 cm in width. This mechanically bonded fabric falls under tariff item 7019.66.00 as an open woven glass fibre fabric.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsHCConsumer Products SafetyMay be required
- HC
Consumer Products Safety · May be required
May require HC Consumer Products Safety depending on intended use (HC21) and Canadian product category (HC29, HC30, HC31, HC32, HC33, HC34, HC35, HC36, HC37); or intended use (HC22, HC23, HC24, HC26, HC27) and Canadian product category (HC37). Matching criteria: Equal To 7019660000; Equal To 7019660000. Logic: MATCH IF (Valid HS Code) AND (Intended Use Code) AND (Valid Canadian Product Category).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the fabric is coated or treated for light diffusion
Treated glass fibre articles fall under this residual heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the fabric is not coated with diffusing agents, as this could alter its classification
• Provide the CBSA with the fabric's weight and filament diameter to support the tariff classification
• If the fabric is cut to fit specific fixtures, it may still be classified as fabric if not further processed
Related Products under Tariff item 7019.66.00
10 Micron RFL Treated Fiberglass Cord Fabric for Radial Tires
Plain weave tire cord fabric from 10 micron continuous fiberglass filaments, RFL impregnated for superior bonding in radial tire plies. Width exceeds 30 cm, weight <250 g/m², non-colored, and electrically nonconductive.
11-Micron Fiberglass RFL Cord Fabric for OTR Tires
High-tenacity colored fiberglass tire cord fabric using 11-micron continuous filaments, RFL impregnated for bonding to off-the-road (OTR) tire rubber compounds. Plain weave construction under 250 g/m² and over 30 cm wide.
11 Micron RFL Impregnated Continuous Filament Tire Cord
Fiberglass tire cord fabric woven from 11 micron nonconductive continuous filaments, RFL treated for rubber adhesion in heavy-duty tires. Plain weave, width >30 cm, <250 g/m², uncolored.
9-Micron Diameter RFL Treated Tire Reinforcement Fabric
Specialty fiberglass fabric woven from 9-micron nonconductive continuous filaments, impregnated with RFL latex and colored for visibility in tire curing processes. Plain weave, <250 g/m², >30 cm wide.
9 Micron Electrically Nonconductive RFL Fiberglass Tire Fabric
High-performance open woven fabric from 9 micron continuous fiberglass filaments, treated with RFL for adhesion to polymeric tire compounds. Plain weave, >30 cm wide, <250 g/m², uncolored.
Advantex Glass Fiber Fabric 218 g/m² 11 Micron
This is an Advantex borosilicate glass plain weave fabric weighing 218 g/m², with 11 micron filaments, mechanically bonded, open weave, exceeding 30 cm in width, uncolored, and with yarns under 136 tex. It is used in various industrial applications. It falls under tariff item 7019.66.00 as an open woven fabric of glass fibres.