Silica Fabric Narrow Sleeve
Silica fabric narrow sleeve is a high-temperature resistant open woven silica glass fabric formed into narrow sleeves, mechanically bonded for thermal protection applications. The sleeve width does not exceed 30 cm, and the mechanical bonding qualifies it as a mechanically bonded open woven fabric. It is classified under tariff item 7019.65.00 for narrow open woven glass fabrics.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sleeve width exceeds 30 cm
Wider mechanically bonded open woven glass fabrics are classified under this item.
If the sleeve is cut to length and sealed at the ends as a finished product
Finished articles of glass fibres, such as pre-formed sleeves, are classified under this residual item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the sleeve is a fabric and not a finished article, as finished sleeves may fall under a different tariff item
• Ensure the width is 30 cm or less and that the mechanical bonding is clearly documented
• Consider requesting a CBSA ruling to avoid delays at the border
Related Products under Tariff item 7019.65.00
11-Micron Nonconductive RFL Tire Cord Weave
An open-woven fiberglass tire cord fabric, electrically nonconductive, with a width not exceeding 30 cm. The fabric is made from 11-micron continuous filaments impregnated with resorcinol formaldehyde latex (RFL) to enhance adhesion to rubber in tire manufacturing. It falls under tariff item 7019.65.00 as a mechanically bonded open woven fabric of glass fibres.
30cm Wide Glass Fiber Mesh Tape for PCB Reinforcement
Open woven glass fiber mesh tape, exactly 30 cm wide, weighing under 185 g/m², and mechanically bonded for structural reinforcement in printed circuit boards. The lightweight open weave provides dimensional stability and electrical insulation. This product is classified under tariff item 7019.65.00 as a narrow, mechanically bonded open woven glass fabric.
9-Micron RFL Treated Fiberglass Cord for Tires
A narrow open-woven fabric made from 9-micron continuous fiberglass filaments, electrically nonconductive, and impregnated with resorcinol formaldehyde latex for tire manufacturing. The width is 30 cm or less, and it is mechanically bonded. This product fits tariff item 7019.65.00 for open woven glass fibre fabrics not exceeding 30 cm.
AR-Glass Open Weave Fabric
Alkali-resistant AR-glass open weave fabric, mechanically bonded for concrete reinforcement in narrow widths. The open weave allows concrete penetration while providing crack resistance. This product is classified under tariff item 7019.65.00 as an open woven fabric of glass fibres not exceeding 30 cm in width.
Automotive RFL Impregnated Glass Tire Cord
An open-weave fiberglass tire cord, mechanically bonded, with a width not exceeding 30 cm, made from electrically nonconductive 9-11 micron filaments. The fabric is impregnated with resorcinol formaldehyde latex for adhesion in tire production. It is classified under tariff item 7019.65.00 as a mechanically bonded open woven fabric of glass fibres.
Carbon Fiber Reinforced Glass Fabric Veil
A lightweight open woven glass fiber fabric veil, mechanically bonded and reinforced with carbon fibers, used as a surfacing layer in composite laminates. The open weave provides a smooth finish while the carbon fibers add strength. This product falls under tariff item 7019.65.00 as an open woven fabric of glass fibres not exceeding 30 cm in width.