Silane-Sized E-Glass Chopped Strands 4.5mm
E-glass chopped strands of 4.5 mm with silane sizing for improved wet-out in polyester resins. These short fibres are under 50 mm and are standard for spray-up and hand lay-up processes in composite fabrication.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the strands exceed 50 mm in length
The 50 mm length limit is the defining criterion for this tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the strand length is 4.5 mm and the silane coating is a surface treatment, not a resin matrix
• Provide the technical datasheet to show the product is a basic chopped strand for resin reinforcement
Related Products under Tariff item 7019.11.00
3B-Fibreglass Chopped Strands 19mm
Chopped strands of E-glass, 19 mm in length, with a dry sizing formulated for thermoplastic reinforcement. These short glass fibres are used in automotive interior parts and polyamide compounds, meeting the tariff item's length requirement of not more than 50 mm.
Advantex Glass Chopped Strands 13mm
Borosilicate E-glass chopped strands, 13 mm long, with enhanced corrosion resistance for roofing mat applications. These short fibres are used in asphalt shingles and meet the tariff item's maximum length of 50 mm.
AR-Glass Chopped Strands 25mm
Alkali-resistant AR-glass chopped strands, 25 mm in length, designed for reinforcing cement in glass fibre reinforced concrete. These short fibres are within the 50 mm limit and are used before mixing into concrete matrices.
C-Glass Chopped Strands 12mm
Corrosion-resistant C-glass chopped strands, 12 mm long, used in fibre-reinforced plastic for chemical tanks and pipes. These short fibres are under 50 mm and are supplied before any matting or weaving process.
E-Glass Chopped Strands 3mm
E-glass chopped strands of 3 mm length, produced from alkali-free borosilicate glass fibres for composite reinforcement. These very short strands are well within the 50 mm limit and are used in resin systems for moulded parts.
High-Silica Chopped Strands 38mm
High-silica chopped strands, 38 mm long, with a silica content above 96% for thermal stability in fire-resistant panels. These strands are within the 50 mm limit and include fused silica variants as per chapter note 5.