Drawn Soda-Lime Glass Sheet 3mm Thick
A rectangular sheet of drawn soda-lime glass, 3 mm thick, intended for general glazing applications such as windows and doors. It is produced by the drawing process and has not been further worked, aligning with the scope of tariff item 7004.90.00 for drawn glass in sheets.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags
No agency flag on this HTS number in the CBSA Single Window matching criteria.
CBSA Single Window matching criteria, unknown
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the glass has an absorbent, reflecting, or non-reflecting layer applied
Heading 7005 covers glass with such layers, while 7004.90.00 is limited to glass without them.
If the glass is further worked, such as bent, edged, or engraved
Heading 7006 includes glass that has been worked beyond the drawing stage, per chapter note 3.
If the glass is cast or rolled rather than drawn
Drawn glass is distinct from cast or rolled glass, which falls under heading 7003.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the glass is not further worked (e.g
• cut to shape, edged, or coated) beyond drawing, as additional processing may change classification
• Declare the thickness and dimensions accurately on customs documents to match the tariff item description
• Verify whether provincial or federal excise taxes apply, depending on the end use
Related Products under Tariff item 7004.90.00
Architectural Partition Drawn Glass Sheets
Thin rectangular drawn glass sheets over 0.26 m² area and under 1.5 mm thickness for interior partitions in offices. These sheets are unworked beyond drawing and cutting, falling under tariff item 7004.90.00 as other drawn glass in sheets.
Blown Glass Observation Window Sheets
Blown glass sheets, 2.4 mm thick and 0.18 m² in area, intended for small observation windows in equipment housings. Produced by the blowing process and not further worked, these sheets meet the criteria for blown glass in sheets under tariff item 7004.90.00.
Blown Glass Panel for Mini Greenhouse
Rectangular blown glass panel, 1.8 mm thick and 0.24 m² area, designed for small greenhouse or terrarium construction. These panels are unworked beyond blowing and cutting, falling under tariff item 7004.90.00 as other blown glass in sheets.
Blown Glass Rectangle for Picture Frame Glazing
Hand-blown clear glass sheets in rectangular shape, 1.2 mm thick and 0.20 m² area, designed for picture frame covers. These sheets are not otherwise worked beyond the drawing or blowing process and cutting to shape, as permitted by Chapter Note 2(b). They fall under tariff item 7004.90.00 as other blown glass in sheets.
Blown Glass Sheet for Small Display Cases
A thin blown glass sheet, 2.5 mm thick and 0.20 m² in area, designed for the fronts of miniature display cases. The glass is unworked and produced by blowing, fitting the description of blown glass in sheets under tariff item 7004.90.00.
Blown Glass Shelf Insert Panel
1.9 mm thick blown glass rectangular panel of 0.26 m² exactly, for inserting into display shelves. These panels are unworked beyond blowing and cutting, classified under tariff item 7004.90.00 as other blown glass in sheets.