Chapter 7003 — Customs Tariff Headings

Anti-Reflective Layer Glass Sheets for Displays

Rolled glass sheets with a microscopically thin non-reflecting chemical layer applied before annealing to minimize glare in signage and display applications. The layer prevents surface reflection while retaining transparency, classifying them under tariff item 7003.12.00 as non-wired cast or rolled glass with a non-reflecting layer.

Body Tinted Cast Green Glass Sheets

Cast and rolled glass sheets colored green throughout the mass via metal oxides added during melting, used primarily in architectural glazing. They are non-wired sheets not otherwise worked, meeting the body-tinted requirement of tariff item 7003.12.00.

Bronze Body Tinted Architectural Glass Panels

Non-wired cast and rolled glass sheets uniformly tinted bronze throughout the mass for sun control in building facades. The body tinting is achieved during production, and the sheets are not otherwise worked, fitting tariff item 7003.12.00.

Clear Base Blue Flashed Glass Sheets

Non-wired rolled glass sheets featuring a flashed blue layer on a clear substrate for art glass windows. The flashing process creates a thin colored layer fused to the base during rolling, and the sheets are not otherwise worked, classifying under tariff item 7003.12.00.

Flashed Red Cast Glass Sheets

Cast glass sheets with a thin red layer fused onto a clear base during rolling, creating a flashed effect for decorative stained glass applications. These non-wired sheets are not otherwise worked, falling under tariff item 7003.12.00 for flashed glass.

Grey Body Tinted Rolled Glass for Skylights

Cast and rolled sheets tinted grey uniformly through the body for diffused natural light in skylight applications. The grey tint is achieved by adding colorants during melting, and the non-wired sheets are not otherwise worked, fitting tariff item 7003.12.00.

Low-E Absorbent Layer Rolled Glass Sheets

Rolled glass sheets with a microscopically thin metal oxide layer applied before annealing to absorb infrared light for energy-efficient windows. This absorbent layer meets the chapter note 2(c) definition, and the non-wired sheets classify under tariff item 7003.12.00.

Opacified Rolled Frosted Glass Sheets

Rolled glass sheets rendered opaque throughout the mass by incorporating opacifying agents like fluorides during production, ideal for privacy partitions. These non-wired sheets are not otherwise worked, classifying under tariff item 7003.12.00 for opacified glass.

Opaque White Opacified Glass Sheets for Partitions

Cast rolled sheets opacified white throughout the mass using opacifiers for use in office partitions and shower screens. The opacity is achieved during production, and the non-wired sheets are not otherwise worked, fitting tariff item 7003.12.00.

Solar Reflective Coated Rolled Glass Sheets

Rolled glass sheets with a pre-anneal thin metallic reflecting layer to bounce solar heat, used in greenhouses. The reflecting layer retains translucency, meeting chapter note 2(c), and the non-wired sheets classify under tariff item 7003.12.00.

Bronze Tinted Cast Glass Profile Strip 2mm x 50mm

A narrow cast glass profile strip in bronze tint, produced by rolling molten glass into continuous profiles and not further worked beyond annealing. It falls under tariff item 7003.19.00 as 'other' non-wired cast glass in profiles, used for edging or linear glazing applications.

Clear Cast Soda-Lime Glass Sheet 3mm Thick

A flat, non-wired sheet of cast soda-lime glass, 3mm thick, produced by rolling molten glass into sheets without further working beyond annealing. It qualifies as 'other' non-wired cast glass in sheets under tariff item 7003.19.00, as it is not wired and not otherwise worked.

IR-Reflecting Cast Glass Sheet for Skylights 5mm

A cast glass sheet with a microscopically thin IR-reflecting metal oxide layer, 5mm thick, rolled and annealed only. Per chapter note 2(c), such a layer does not make the glass 'worked,' so it remains classified under tariff item 7003.19.00 as 'other' non-wired cast glass in sheets.

Opaque White Rolled Glass Sheet 8mm Thick

A thick 8mm opaque white rolled glass sheet, cast for light diffusion applications like diffusers, non-wired and unworked beyond annealing. It falls under tariff item 7003.19.00 as 'other' non-wired cast glass in sheets, as the opacity is an integral property of the glass, not a post-treatment.

Patterned Rolled Glass Sheet Frosted Texture 4mm

An obscure frosted patterned rolled glass sheet, 4mm thick, created during casting with an integral texture, not post-worked. It qualifies as 'other' non-wired cast glass in sheets under tariff item 7003.19.00, as the pattern is formed during rolling and the glass is not otherwise worked.

Tinted Green Rolled Glass Sheet 6mm Thick

A rolled glass sheet with a green tint, 6mm thick, cast in continuous sheets without wiring or additional working. It falls under tariff item 7003.19.00 as 'other' non-wired cast glass in sheets, suitable for greenhouse roofing or partitions where light diffusion and strength are needed.

4mm Wired Sheet Glass

Standard 4mm thick wired sheets made from cast glass, featuring an embedded wire mesh at 25mm centers for enhanced safety. These sheets are not further worked beyond the casting process, aligning with the tariff item for wired sheets. Suitable for partitions and other architectural applications requiring shatter resistance.

6mm Wired Safety Sheets

Thicker 6mm wired rolled glass sheets designed for high-impact areas such as schools, providing robust shatter control with an embedded wire grid. These sheets are produced by rolling and are not otherwise worked, fitting the tariff item for wired sheets. The wire reinforcement ensures safety in demanding environments.

Anti-Spilinter Wired Sheets

Wired glass sheets designed to prevent splintering upon breakage, made from cast or rolled glass with a fine mesh for minimal visual impact. These sheets are not further worked, classifying under the tariff item for wired sheets. Ideal for institutional applications where safety and clarity are required.

Clear Wired Rolled Glass Sheets

Transparent rolled glass sheets with a fine wire mesh, offering clarity and safety for skylight applications. These sheets are produced by rolling and are not otherwise worked, fitting the tariff item for wired sheets. The wire mesh provides structural integrity while maintaining transparency for overhead glazing.

Diamond Pattern Wired Glass

Classic diamond-wired rolled glass sheets featuring a distinctive diamond pattern from the rolling process, used for vintage skylights. These sheets are not further worked, classifying under the tariff item for wired sheets. The wire mesh is embedded during rolling, providing both aesthetic appeal and safety.

Georgian Wired Cast Glass Sheets

Traditional wired glass sheets with a textured Georgian pattern, produced by casting or rolling with embedded wire mesh. These sheets are not further worked, fitting the tariff item for wired sheets. Used in heritage building restoration for aesthetic authenticity and safety.

Industrial Wired Glass Profiles

Extruded wired glass profiles in sheet-like forms, designed for machinery guards and harsh environments. These profiles are made from cast or rolled glass with wire reinforcement, classifying under the tariff item for wired sheets. Not further worked, they provide shatter resistance in industrial settings.

Obscure Wired Glass Sheets

Privacy wired glass sheets with a hammered or obscure pattern created during the rolling process, ensuring safety in bathrooms or offices. These sheets are not further worked, fitting the tariff item for wired sheets. The wire mesh provides shatter resistance while the texture offers privacy.

Solar Control Wired Sheets

Wired sheets with a non-reflecting layer designed to cut solar heat, produced by cast or rolled glass with embedded wire mesh. The microscopically thin layer meets the chapter note definition, allowing classification under the tariff item for wired sheets. These sheets retain transparency while improving energy efficiency.

Textured Wired Profile Glass

Profiles of wired glass with a rolled texture, designed for decorative screens and partitions. These profiles are made from cast or rolled glass with embedded wire mesh, classifying under the tariff item for wired sheets. Not further worked, they offer structural integrity and aesthetic appeal.

Wired Fire-Resistant Glass Panels

Wired glass sheets designed for fire doors and partitions, featuring embedded steel wire mesh within cast or rolled glass. These sheets are not further worked, fitting the tariff item for wired sheets. The wire mesh holds the glass together during fires, complying with building safety regulations.

Wired Glass for Fire Doors

Pre-sized wired glass sheets meeting UL fire ratings for door vision panels, produced by rolling with a diamond wire pattern. These sheets are not further worked, classifying under the tariff item for wired sheets. The wire mesh provides strength and fire resistance for door applications.

Wired Glass Sheets with IR Reflecting Layer

Wired rolled glass sheets with a microscopically thin IR-reflecting metal oxide layer, improving energy efficiency while retaining translucency. This layer meets the chapter note 2(c) definition, allowing classification under the tariff item for wired sheets. Used in green building applications for solar control.

Wired Greenhouse Glass Sheets

Durable wired sheets of rolled glass for greenhouse roofing, embedded with wire for impact resistance. These sheets are not further worked, fitting the tariff item for wired sheets. The mesh holds fragments if hail breaks the glass, protecting plants and structures.

Wired Safety Glass Sheets

Cast or rolled glass sheets reinforced with an internal wire mesh grid, classified under the tariff item for wired sheets. These sheets are not further worked, providing shatter resistance by preventing the glass from breaking into large dangerous pieces. Suitable for various safety applications.

Cast Glass Decorative Profile Strip

Decorative strip profiles cast in wavy shapes from glass, used for edging in interior design. These profiles are not otherwise worked beyond casting and shaping before annealing, qualifying under tariff item 7003.30.00 for cast glass profiles.

Cast Glass Hollow Profile Tube

Hollow tubular profiles cast from glass, used in lighting diffusers and structural columns. These profiles are cast to shape and not otherwise worked, falling under tariff item 7003.30.00 for cast glass profiles.

Cast Glass I-Beam Profile

I-beam shaped profiles cast from glass, designed for load-bearing applications in modern glass architecture. These profiles may feature an infrared-absorbing layer but are not otherwise worked, qualifying under tariff item 7003.30.00 for cast glass profiles.

Cast Glass U-Channel Profile

U-shaped profiles made from cast glass, used in architectural glazing systems for curtain walls. These profiles are formed by casting and not otherwise worked beyond basic shaping before annealing, falling under tariff item 7003.30.00.

Patterned Rolled Glass L-Profile

L-shaped profiles with a patterned rolled surface, used for decorative balustrades and railings. These profiles are rolled glass not otherwise worked, and may include non-reflecting layers, qualifying under tariff item 7003.30.00.

Rolled Glass Angle Profile Bar

Angle bar profiles from rolled glass, used for corner reinforcements in glass facades. These profiles are unworked beyond rolling and shaping, and may have reflecting layers, falling under tariff item 7003.30.00.