Non-Woven Surface Conditioning Discs on Plastic Backing
Non-woven nylon web impregnated with aluminum oxide abrasives on a plastic backing, used for rust removal and blending welds. The plastic backing is an 'other material' base, so the product falls under tariff item 6805.30.00, despite the web-like structure.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (2)Show detailsHide detailsCBSACBSA FPA Risks (Soil)RequiredHCConsumer Products SafetyMay be required
- CBSA
CBSA FPA Risks (Soil) · Required
Canada Border Services Agency: CBSA CBSA FPA Risks (Soil) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 6801000000–6815919000).
- HC
Consumer Products Safety · May be required
May require HC Consumer Products Safety depending on intended use (HC21) and Canadian product category (HC29, HC30, HC31, HC32, HC33, HC34, HC35, HC36, HC37); or intended use (HC22, HC23, HC24, HC26, HC27) and Canadian product category (HC37). Matching criteria: Equal To 6805300000; Equal To 6805300000. Logic: MATCH IF (Valid HS Code) AND (Intended Use Code) AND (Valid Canadian Product Category).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the nylon web is considered a textile base
Textile-based abrasives are classified under 6805.10.
If the non-woven web is the primary material and abrasive is minor
Non-woven fabrics may be classified under Chapter 56.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the plastic backing is not a textile material, as non-woven nylon could be mistaken for fabric
• Provide a material safety data sheet to confirm the abrasive composition
• If the discs are used with power tools, ensure they are not classified as parts of machines
Related Products under Tariff item 6805.30.00
Abrasive Foam Blocks for Hand Finishing
Handheld foam blocks with embedded garnet abrasive for final paint preparation. The foam base is 'other materials' under tariff item 6805.30.00.
Abrasive Foam Sheets for Delicate Surfaces
Flexible foam sheets coated on one side with fine abrasive grains, designed for cleaning and finishing delicate surfaces such as plastic moldings. The polyurethane foam base qualifies as 'other materials' under tariff item 6805.30.00, distinguishing it from paper or textile-backed abrasives.
Abrasive Nylon Surface Conditioning Belts
Nylon web belts on a polymer substrate, used for belt sanders. The polymer base is 'other materials' under tariff item 6805.30.00.
Abrasive Sanding Belts for Wide Belt Sanders
Closed-loop sanding belts coated with zirconia alumina abrasive on a polyurethane backing, used in industrial wide belt sanders. The polyurethane base is 'other materials' under tariff item 6805.30.00, as it is neither textile nor paper.
Aluminum Oxide Sanding Discs on Foam Backing
Sanding discs with aluminum oxide abrasive grains on a flexible foam backing, used for contour sanding in automotive refinishing. The foam base is 'other materials' under tariff item 6805.30.00.
Ceramic Grain Scouring Pads on Foam Core
Heavy-duty scouring pads with ceramic abrasive grains on a foam core, used for cleaning pots and industrial surfaces. The foam core is 'other materials' under tariff item 6805.30.00.