Polypropylene Spunbond Nonwoven Fabric 100 g/m²
This polypropylene spunbond nonwoven fabric weighs 100 g/m² and is used in disposable medical gowns and protective covers. It is classified under tariff item 5603.93.00 because it is a nonwoven textile material weighing more than 70 g/m² but not more than 150 g/m².
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the fabric weighs more than 25 g/m² but not more than 70 g/m²
This alternative covers nonwovens of a lower weight range, which may apply if the actual weight is below 70 g/m².
If the fabric weighs more than 150 g/m²
This alternative covers nonwovens exceeding 150 g/m², which may apply if the product's weight is higher than specified.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the fabric weight is accurately documented (e.g
• via a certificate of analysis) to confirm it falls within the 70–150 g/m² range
• Declare the correct end-use (e.g
• medical gowns) to avoid misclassification, and keep supplier specifications handy for CBSA verification
Related Products under Tariff item 5603.93.00
Abrasive Backing Nonwoven Web
A nonwoven polyester web weighing 135 g/m², designed as a flexible backing for coated abrasives and sanding discs. It falls under tariff item 5603.93.00 as a nonwoven in the 70-150 g/m² weight range, and is not excluded by chapter notes since it lacks visible plastic or rubber coating.
Absorbent Benchtop Liner Nonwoven
A cellulosic-poly blend nonwoven sheet weighing 130 g/m², used for absorbing spills on lab benchtops. It is lightly impregnated for absorbency without a visible coating, qualifying under tariff item 5603.93.00 as a nonwoven in the 70-150 g/m² range.
Automotive Cabin Air Filter Media
A polypropylene nonwoven fabric weighing 90 g/m², used as filter media in automotive cabin air filters to capture dust and pollen. It falls under tariff item 5603.93.00 as a nonwoven in the 70-150 g/m² weight range, with no visible coating.
Automotive Grade Imitation Suede Nonwoven
Automotive grade imitation suede nonwoven fabric, weighing 140 g/m², coated with an acrylic and polyurethane blend to create a suede-like surface for car seat covers. This product falls under tariff item 5603.93.00 as a nonwoven weighing between 70 and 150 g/m², with coatings that go beyond simple plastic or rubber lamination.
Battery Separator Nonwoven Sheet
A polypropylene nonwoven membrane weighing 80 g/m², used as separators in lithium-ion batteries to prevent short circuits. It qualifies under tariff item 5603.93.00 as a nonwoven in the 70-150 g/m² range, with minimal coating that is not visible.
Bicomponent Fiber Nonwoven 130 g/m² for Filtration
Bicomponent fiber nonwoven weighing 130 g/m², thermal-bonded for air and liquid filtration media. It is classified under tariff item 5603.93.00 as a nonwoven in the 70–150 g/m² range, where the core-sheath fiber structure provides bonding without additional coatings.