Fashion Imitation Suede Apparel Interlining
Fashion imitation suede apparel interlining is a lightweight 30 g/m² nonwoven made from polyester filaments, surface-coated with an acrylic-resin blend to imitate suede for jacket linings. It is classified under tariff item 5603.12.00 because it is a nonwoven of man-made filaments weighing between 25 and 70 g/m². The acrylic-resin coating is not considered plastics or rubber for classification purposes.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the weight is 25 g/m² or less
Nonwovens of man-made filaments weighing not more than 25 g/m² are classified under this item.
If the weight exceeds 70 g/m²
Nonwovens of man-made filaments weighing more than 70 g/m² but not more than 150 g/m² fall under this item.
If the coating is visible plastics
Nonwovens coated with plastics visible to the naked eye are classified in Chapter 59.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the acrylic-resin blend is not visible plastics or rubber, as that would move the product to Chapter 39 or 40
• The 30 g/m² weight must be clearly stated on commercial documents
• If the interlining is cut to shape for apparel, verify it is not considered 'made up' under Section XI Note 7
Related Products under Tariff item 5603.12.00
Acrylic Nonwoven Air Filtration Media 30 g/m²
Acrylic filament nonwoven media at 30 g/m², used for HVAC air filters to capture dust particles. It is a nonwoven of man-made filaments within the 25-70 g/m² weight range, classifiable under tariff item 5603.12.00.
Acrylic Nonwoven Geotextile 65 g/m²
Acrylic filament nonwoven geotextile sheet weighing 65 g/m², used for soil stabilization and drainage in civil engineering. It is a nonwoven of man-made filaments within the 25-70 g/m² weight range, classifiable under tariff item 5603.12.00.
Automotive Imitation Suede Headliner Material
Automotive imitation suede headliner material is a nonwoven fabric made from man-made filaments, weighing 55 g/m². It is coated with a specialty resin other than plastics or rubber to replicate suede for car roof linings. This product falls under tariff item 5603.12.00 because it is a nonwoven of man-made filaments weighing between 25 and 70 g/m².
Carbon Filter Nonwoven Substrate 52 g/m²
Specialty nonwoven substrate (52 g/m²) impregnated with activated carbon for odor control filters in HVAC and appliances. The carbon impregnation does not constitute an excluded plastic or rubber coating, so it remains a nonwoven of man-made filaments within the 25-70 g/m² range.
Craft Imitation Suede Nonwoven Sheets
Craft imitation suede nonwoven sheets are pre-cut, 50 g/m² man-made filament nonwoven sheets with mineral-based impregnation for DIY suede crafts and scrapbooking. They are classified under tariff item 5603.12.00 as nonwovens of man-made filaments in the 25–70 g/m² weight range. The mineral-based impregnation does not constitute a plastics or rubber coating.
Filament Nonwoven Incubator Liner 48 g/m²
Soft polyester filament nonwoven liner at 48 g/m², used for medical incubators and bassinet sheets. It is a nonwoven of man-made filaments within the 25-70 g/m² weight range, classifiable under tariff item 5603.12.00.