80gsm Mechanical Pulp Offset Printing Paper A4 Sheets
Uncoated A4 offset printing paper (210 x 297 mm) weighing 80 g/m², made with more than 10% mechanical or chemi-mechanical pulp fibres. It is used for offset printing and other graphic purposes, and is classified under 4802.62.00 due to its sheet size and pulp composition.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsHCConsumer Products SafetyMay be required
- HC
Consumer Products Safety · May be required
May require HC Consumer Products Safety depending on intended use (HC21) and Canadian product category (HC29, HC30, HC31, HC32, HC33, HC34, HC35, HC36, HC37); or intended use (HC22, HC23, HC24, HC26, HC27) and Canadian product category (HC37). Matching criteria: Equal To 4802620000; Equal To 4802620000. Logic: MATCH IF (Valid HS Code) AND (Intended Use Code) AND (Valid Canadian Product Category).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If supplied in rolls
Rolls of mechanical pulp paper are classified under 4802.61.00.
If the paper weighs more than 150 g/m²
Heavier paper may fall under other subheadings of heading 48.02.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the paper is uncoated and that mechanical pulp exceeds 10% of fibre content; retain supplier specifications
• A4 sheets (210 x 297 mm) fit the size criteria, but verify both dimensions do not exceed 435 mm and 297 mm respectively
• If the paper is used for printing, ensure it does not have printed motifs that would move it to Chapter 49
Related Products under Tariff item 4802.62.00
25% Cotton Content Letterhead Paper
Uncoated letter-size paper (8.5 x 11 inches, approximately 216 x 279 mm) with 25% cotton fibre content, the balance being mechanical pulp. It is used for executive stationery and business printing, and is classified under 4802.62.00 because it is in sheets not exceeding 435 mm by 297 mm and contains more than 10% mechanical pulp.
60gsm Mechanical Pulp Flyer Paper A5 Sheets
60gsm Mechanical Pulp Flyer Paper A5 Sheets are lightweight uncoated A5 sheets measuring 148 x 210 mm, with mechanical pulp content exceeding 10%. These sheets are designed for flyers, brochures, and promotional printing. This product is classified under tariff item 4802.62.00 as uncoated paper for graphic purposes, given its small sheet size and mechanical fiber content.
65gsm Chemi-Mechanical Pulp Laser Paper A4
65gsm Chemi-Mechanical Pulp Laser Paper A4 consists of uncoated A4 sheets with chemi-mechanical pulp content exceeding 10%, designed for laser and inkjet printing. The sheets measure 210 x 297 mm, fitting the size criteria of one side not exceeding 435 mm and the other not exceeding 297 mm. This product is classified under tariff item 4802.62.00 as uncoated paper for office graphic use.
70gsm Recycled Mechanical Pulp Copy Paper A4
Uncoated A4 copy paper (210 x 297 mm) made from recycled fibres, with more than 10% of the total fibre content consisting of mechanical or chemi-mechanical pulp. It is used for office printing, photocopying and graphic design drafts, and qualifies under tariff item 4802.62.00 because it is in sheets with one side not exceeding 435 mm and the other not exceeding 297 mm.
90gsm Groundwood Pulp Brochure Paper A4
Uncoated A4 brochure paper made from groundwood (mechanical) pulp, with mechanical pulp content exceeding 10% of total fibre weight. It is designed for multi-page brochures and catalogs, and falls under tariff item 4802.62.00 because it is in sheets not exceeding 435 mm by 297 mm.
Adox Silvermax Resin-Coated Base Sheets
Adox Silvermax Resin-Coated Base Sheets are uncoated RC base paper in A4-equivalent sheets measuring 210 x 297 mm, containing more than 10% chemi-mechanical fibers. These sheets are designed for high-contrast silver gelatin sensitization in photographic applications. This product is classified under tariff item 4802.62.00 as uncoated paper for graphic purposes, given its small sheet size and mechanical fiber content.