Other, with both outer plies of coniferous wood
Plywood, veneered panels and similar laminated wood. > Blockboard, laminboard and battenboard: > Other, with both outer plies of coniferous wood > Other, with both outer plies of coniferous wood > Other, with both outer plies of coniferous wood
Duty Rate (from China)
Products classified under Tariff item 4412.59
Clear Grade Pinus Silvestris Plywood
Premium clear grade plywood featuring a defect-free European red pine face ply with consistent grain pattern. Used in visible architectural paneling and high-end joinery, with surface treatment preserving the natural pine appearance.
4412.59.00Douglas Fir Battenboard Sheet
Battenboard consisting of narrow Douglas fir core battens with matching coniferous fir veneers on both faces, typically 1220x2440mm by 18mm. This product falls under tariff item 4412.59.00 as battenboard with coniferous outer plies, distinguished from other plywood by its core construction.
4412.59.00Douglas Fir Exterior Plywood Sheathing
Water-resistant plywood panels constructed with Douglas fir coniferous veneers on both outer surfaces, bonded with phenolic adhesives for outdoor applications. This product falls under tariff item 4412.59.00 as other coniferous plywood not specifically covered elsewhere in the subheading.
4412.59.00Douglas Fir Exterior Sheathing Plywood
Structural plywood for exterior wall sheathing with Douglas fir coniferous face and back veneers, waterproof glue, and no opaque surface covering. Grain and markings remain visible through any clear sealant.
4412.59.00European Red Pine Battenboard Furniture Panel
A battenboard with Pinus sylvestris face ply over a softwood batten core, specifically engineered for flatpack furniture components. A transparent film coating maintains visibility of characteristic pine markings.
4412.59.00European Red Pine Face Baltic Birch Plywood
Baltic birch plywood featuring a face ply of European red pine (Pinus silvestris) with multiple inner birch plies for strength. Not surface-covered or covered only with transparent material that preserves the visible grain.
4412.59.00European Red Pine Veneer Laminboard Panel
A laminboard constructed with Pinus silvestris face ply over a batten core of softwood strips, used in furniture framing. Grain and markings remain visible through any transparent protective film.
4412.59.00Hem-Fir Construction Grade Plywood Panels
Mixed hemlock-fir plywood panels per the subheading definition, featuring coniferous outer plies for structural framing and formwork. These panels are classified under tariff item 4412.59.00 as standard coniferous plywood used in residential construction.
4412.59.00Hem-Fir Mixed Battenboard
Battenboard from Hem-Fir mixed species with coniferous outer veneers, core battens spaced for strength, 25mm thickness. This product falls under tariff item 4412.59.00 as other battenboard with coniferous plies, per chapter notes allowing mixed species.
4412.59.00Hem-Fir Underlayment Plywood 1/2 Inch
1/2-inch plywood panels with Hem-Fir (hemlock-fir mix) coniferous outer veneers, tongue-and-groove edges for flooring underlayment. No grain-obscuring surface treatment applied.
4412.59.00Lodgepole Pine Blockboard
Heavy-duty blockboard with Lodgepole pine core blocks and matching coniferous veneers, 38mm thick for load-bearing uses. This product falls under tariff item 4412.59.00 as other blockboard with coniferous faces, suitable for shelving and structural applications.
4412.59.00Lodgepole Pine Utility Plywood
Utility grade plywood sheathing with lodgepole pine coniferous face and back veneers, 15/32 inch thickness for general construction. Clear or no surface coating preserves natural wood markings.
4412.59.00Lodgepole Pine Utility Plywood 1/2 Inch
Economic-grade plywood featuring lodgepole pine coniferous veneers on exterior faces, suitable for utility shelving and temporary formwork. This product is covered under tariff item 4412.59.00 as unspecified coniferous plywood.
4412.59.00Parana Pine Face Battenboard Panel for Furniture
A battenboard panel with a narrow wood batten core, a Parana pine (Araucaria angustifolia) face ply, and a coniferous back ply. The natural grain is exposed, making it suitable for table tops and furniture applications.
4412.59.00Parana Pine Face Laminated Blockboard 1/2 Inch Thick
A blockboard with a softwood block core, Parana pine face ply, and coniferous back ply, 1/2 inch thick. Designed for shelving, the natural wood surface is exposed to showcase the grain.
4412.59.00Parana Pine Face Plywood 4x8 Sheet 3/4 Inch
A standard plywood panel measuring 4 feet by 8 feet with 3/4 inch thickness, featuring a Parana pine face ply and a coniferous back ply. The surface is not covered, preserving the natural grain for various applications.
4412.59.00Parana Pine Plywood Cabinet Panel 1220x2440mm 18mm
A metric-sized plywood sheet (1220mm x 2440mm, 18mm thick) with a Parana pine face ply for kitchen cabinet doors. The natural texture is preserved without surface covering, and the back ply is coniferous.
4412.59.00Parana Pine Veneer Plywood Shelf Board 5/8 Inch
A 5/8 inch plywood shelf board with a premium Parana pine face veneer ply over a coniferous core. Only a transparent coating is applied, allowing the natural grain to remain visible.
4412.59.00Pinus Silvestris Face Pine Core Plywood Sheet
A structural plywood panel with European red pine (Pinus sylvestris) face veneer over pine core layers, designed for construction applications. The surface is untreated or has only clear coating maintaining visibility of the grain.
4412.59.00Pinus Silvestris Overlay-Free Cabinet Plywood
High-quality cabinet-grade plywood with authentic European red pine face ply, no decorative overlays, showcasing natural knots and grain. Ideal for custom furniture where visible softwood texture is desired.
4412.59.00Ponderosa Pine Blockboard
Structural blockboard using Ponderosa pine core and face veneers, both coniferous, 28mm thickness for heavy shelving. This product falls under tariff item 4412.59.00 as other blockboard, valued for workability and appearance in retail fixtures.
4412.59.00Ponderosa Pine Pallet Base Plywood
Heavy-duty 3/4-inch plywood cut for pallet decking and bases, with Ponderosa pine coniferous outer veneers and an untreated surface. The natural wood grain is exposed without any coverings, qualifying it as plywood with both outer plies of coniferous wood under tariff item 4412.59.00.
4412.59.00Radiata Pine CDX Plywood Panel
CDX grade plywood panel with Radiata pine coniferous outer plies, suitable for construction subflooring and roofing, 5/8 inch thick. The surface has no covering or only a transparent sealer showing the wood grain pattern, placing it under tariff item 4412.59.00 for other plywood with both outer plies of coniferous wood.
4412.59.00Radiata Pine Laminated Cabinet Plywood
High-quality plywood made from New Zealand radiata pine with matching coniferous outer veneers, designed for kitchen cabinetry and furniture fabrication. This product falls under tariff item 4412.59.00 as other coniferous plywood without specific classification elsewhere.
4412.59.00Radiata Pine Laminboard Panel
Laminboard constructed from multiple layers of Radiata pine lumber core with coniferous pine outer veneers, 18mm thick standard size. This product falls under tariff item 4412.59.00 as laminboard with both outer plies coniferous, used in furniture and interior applications.
4412.59.00Scots Pine Battenboard
European Scots pine battenboard with spaced core battens and coniferous pine veneers on both sides, 22mm thick. This product falls under tariff item 4412.59.00 for other battenboard types with coniferous plies, applied in temporary formwork and staging.
4412.59.00Scots Pine Face Structural Plywood
Scots pine (Pinus sylvestris) face plywood meeting construction standards, with clear or no surface treatment preserving natural wood appearance. Used for sheathing and subflooring where species-specific appearance matters.
4412.59.00Scots Pine Furniture Grade Plywood
Select-grade plywood with Scots pine outer veneers, sanded smooth for visible furniture applications like tabletops and cabinet doors. This product falls under tariff item 4412.59.00 for coniferous plywood not elsewhere specified.
4412.59.00Sitka Spruce Aircraft Grade Plywood
High-quality Sitka spruce coniferous plywood for aircraft and marine applications, with consistent outer plies and no opaque coverings. The grain texture is fully visible for strength assessment, fitting tariff item 4412.59.00 as other plywood with both outer plies of coniferous wood.
4412.59.00SPF Pine Blockboard Panel
This is a structural blockboard panel with a core of spruce-pine-fir strips and both outer plies made of coniferous pine veneer, measuring 4x8 feet by 3/4 inch thick. It is used in construction and furniture making where dimensional stability and strength are required. It falls under tariff item 4412.59.00 because it is a blockboard with both outer plies of coniferous wood.
4412.59.00SPF Pine Plywood 3/4 Inch 4x8 Sheet
Standard plywood panel made with both outer plies of SPF (spruce-pine-fir) coniferous wood, with a core of softwood veneers, measuring 3/4 inch thick by 4x8 feet. Not surface-covered or covered only with transparent finish, this product falls under tariff item 4412.59.00 for other plywood with both outer plies of coniferous wood.
4412.59.00Western Hemlock Laminboard
This is a laminboard panel with a core of Western hemlock laminations and both outer plies made of coniferous hemlock veneer, in a standard 19mm thickness. It is used for interior joinery, cabinetry, and shelving where a smooth, stable surface is needed. It is classified under tariff item 4412.59.00 as a laminboard with both outer plies of coniferous wood.