Of a density not exceeding 0.5 g/cm³
Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. > Other: > Of a density not exceeding 0.5 g/cm³ > Of a density not exceeding 0.5 g/cm³
Duty Rate (from China)
Products classified under Tariff item 4411.94.00.00
Acoustic Bitumen-Impregnated Fiberboard Panels
Acoustic bitumen-impregnated fiberboard panels designed for sound absorption, with a controlled density of 0.35–0.5 g/cm³. These panels are not mechanically worked or surface-covered, and the bitumen treatment enhances their acoustic and moisture-resistant properties. They qualify under tariff item 4411.94.00 as low-density fiberboard of wood or other ligneous materials.
4411.94.00Acoustic MDF Panel 12mm
Acoustic MDF panels with a density of 0.48 g/cm³, perforated for sound control in studios and theaters. Made from wood fibers bonded with resins, they fall under tariff item 4411.94.00 as fibreboard of a density not exceeding 0.5 g/cm³.
4411.94.00Bagasse Fiberboard 7mm
Bagasse fibreboard with a density of 0.44 g/cm³, made from sugarcane bagasse fibres for furniture and packaging. As a ligneous material, it qualifies as fibreboard under tariff item 4411.94.00.
4411.94.00Bagasse Fiberboard Wall Sheathing
Bagasse fiberboard wall sheathing is made from sugarcane bagasse, a ligneous agricultural residue, with a density of 0.35–0.5 g/cm³, used for exterior wall sheathing. It falls under tariff item 4411.94.00 as fiberboard of other ligneous materials, offering an eco-friendly alternative to wood-based boards.
4411.94.00Bamboo Fiberboard Panel 8mm
Bamboo fibreboard panels with a density of 0.47 g/cm³, made from bamboo fibres for decorative wall panels. Per Chapter 44 note 6, bamboo is treated as wood, so it falls under tariff item 4411.94.00.
4411.94.00Bitumen-Coated Roof Underlayment Fiberboard
Bitumen-coated roof underlayment fiberboard sheets, impregnated with bitumen and having a density of 0.35–0.5 g/cm³, serve as a moisture barrier in construction. These sheets are not mechanically worked or surface-covered, aligning with the tariff item's scope for low-density fiberboard. The bitumen treatment provides water resistance for roofing applications.
4411.94.00Bitumen Impregnated Bamboo Fiberboard Sheets
Bitumen-impregnated bamboo fiberboard sheets, made from bamboo as a ligneous material, have a density of 0.35–0.5 g/cm³ and are treated for damp-proofing. These sheets are not mechanically worked or surface-covered, qualifying under tariff item 4411.94.00. Chapter 44 note 6 extends the scope to bamboo and other woody materials.
4411.94.00Bitumen Impregnated Fiberboard Soundproofing Panels
Bitumen-impregnated fiberboard soundproofing panels, with a density of 0.35–0.5 g/cm³, are treated with bitumen for improved acoustic insulation and moisture resistance. These panels are not mechanically worked or surface-covered, qualifying under tariff item 4411.94.00. They are used in wall applications for soundproofing.
4411.94.00Bitumen Impregnated Low-Density Fiberboard Panels
Low-density fiberboard (LDF) panels with a density between 0.35 and 0.5 g/cm³, made from wood fibers bonded with resins and impregnated with bitumen for water resistance. These panels are not mechanically worked or surface-covered, fitting the tariff item's description. They are used in construction for moisture-resistant applications.
4411.94.00Bitumen Impregnated Low-Weight Partition Board
Bitumen-impregnated low-weight partition board, a light medium-density fiberboard with density exceeding 0.35 but not exceeding 0.5 g/cm³, is treated with bitumen for fire resistance and humidity protection. This board is not mechanically worked or surface-covered, fitting tariff item 4411.94.00. It is used for interior partitions.
4411.94.00Bitumen Impregnated Medium Density Fiberboard Roof Underlayment
Bitumen-impregnated medium-density fiberboard (MDF) roof underlayment, with a density between 0.35 and 0.5 g/cm³, is treated with bitumen to enhance water resistance and durability. This product is not mechanically worked or surface-covered, qualifying under tariff item 4411.94.00. It is used as roof underlayment in construction.
4411.94.00Bitumen Sealed MDF Construction Sheathing Board
Bitumen-sealed MDF construction sheathing board, with a density of 0.35–0.5 g/cm³, is fully impregnated with bitumen for use as exterior sheathing in framing. This board is not mechanically worked or surface-covered, fitting tariff item 4411.94.00. It provides weatherproofing in construction applications.
4411.94.00Bitumen Treated MDF Exterior Cladding Panels
Bitumen-treated MDF exterior cladding panels, with a density of 0.35–0.5 g/cm³, are impregnated with bitumen for outdoor weather resistance in siding applications. These panels are not mechanically worked or surface-covered, qualifying under tariff item 4411.94.00. They are used for aesthetic and protective cladding.
4411.94.00Bitumen Treated Wood Fiber Underfloor Panels
Bitumen-treated wood fiber underfloor panels, designed for underfloor heating systems, have a density of 0.35–0.5 g/cm³ and untreated surfaces. These panels are impregnated with bitumen for moisture resistance and are not mechanically worked. They qualify under tariff item 4411.94.00 as low-density fiberboard.
4411.94.00Construction-Grade Bitumen LDF Sheathing Panels
Construction-grade bitumen LDF sheathing panels, treated with bitumen impregnation for exterior moisture protection, have a density of 0.35–0.5 g/cm³. These panels are not mechanically worked or surface-covered, aligning with tariff item 4411.94.00. They are used as sheathing in building construction.
4411.94.00Damp-Proof Course Bitumen Fiberboard
Damp-proof course bitumen fiberboard, specialized for use in masonry to prevent moisture ingress, has a density of 0.35–0.5 g/cm³ and is bitumen-impregnated throughout. This product is not mechanically worked or surface-covered, fitting tariff item 4411.94.00. It is used in construction for damp-proofing applications.
4411.94.00Eucalyptus Fiberboard Panels 16mm
16mm fibreboard made from eucalyptus wood fibres, density 0.39 g/cm³, in raw sheet form without processing. It falls under tariff item 4411.94.00 as fibreboard of density not exceeding 0.5 g/cm³.
4411.94.00Industrial Bitumen Impregnated Backer Board
Industrial bitumen-impregnated backer board is a medium-density fiberboard (0.35–0.5 g/cm³) treated with bitumen for use as a tile backer in high-moisture industrial settings. It provides structural support and water resistance, falling under tariff item 4411.94.00 for fiberboard of a density not exceeding 0.5 g/cm³.
4411.94.00Industrial Bitumen-Impregnated Partition Board
Industrial bitumen-impregnated partition board, used for factory partition walls, has a density of 0.35–0.5 g/cm³ and raw unfinished surfaces. This fiberboard is not mechanically worked or surface-covered, qualifying under tariff item 4411.94.00. It provides temporary or permanent partitioning in industrial settings.
4411.94.00Lightweight HDF Underlayment 5mm
Lightweight HDF underlayment engineered to a density of 0.49 g/cm³, used for flooring underlayment with moisture resistance and sound dampening. Despite the 'HDF' name, its density qualifies it under tariff item 4411.94.00.
4411.94.00Ligneous Bamboo Fiberboard Insulation
Ligneous bamboo fiberboard insulation is produced from bamboo, a ligneous material per Chapter 44 note, with a density of 0.35–0.5 g/cm³, used for thermal insulation. It is classified under tariff item 4411.94.00 as low-density fiberboard, providing sustainable insulation with good thermal performance.
4411.94.00Low-Density Fiberboard Cabinet Back Panels
Low-density fiberboard cabinet back panels are thin sheets (0.35–0.5 g/cm³) cut for furniture cabinet backs, providing rigidity without added weight. They fall under tariff item 4411.94.00 as low-density fiberboard, commonly used in kitchen and bathroom cabinetry.
4411.94.00Low-Density Fiberboard Pattern Making Boards
Low-density fiberboard pattern making boards are large-format boards (0.35–0.5 g/cm³) used for creating patterns in furniture and automotive manufacturing. They are classified under tariff item 4411.94.00 as low-density fiberboard, offering easy machinability for prototype development.
4411.94.00Low-Density MDF Door Skin 3mm
Thin low-density MDF sheets at 0.46 g/cm³, used as door skins for painting and finishing. These fibreboard sheets fall under tariff item 4411.94.00 due to their density not exceeding 0.5 g/cm³.
4411.94.00Low-Density MDF Speaker Baffle Boards
Low-density MDF speaker baffle boards are specialty fiberboard cut for loudspeaker enclosures, with a density of 0.35–0.5 g/cm³ to optimize internal damping. They fall under tariff item 4411.94.00 as low-density fiberboard, providing resonance control superior to solid lumber.
4411.94.00Low-Density Particleboard 9mm
Low-density particleboard at 0.42 g/cm³, bonded with urea-formaldehyde resin for lightweight furniture cores. It qualifies as fibreboard under tariff item 4411.94.00, as particleboard is included in heading 44.11.
4411.94.00Low-Density Particleboard Insulation Panels
Low-density particleboard insulation panels are made from wood particles bonded with resins, with a density between 0.35 and 0.5 g/cm³, classifying them under tariff item 4411.94.00 as low-density fiberboard. They are commonly used for insulation in construction applications.
4411.94.00Low-Density Wood Fiber Door Core Panels
Low-density wood fiber door core panels are lightweight fiberboard cores (0.35–0.5 g/cm³) for hollow-core interior doors, providing structural support with minimal weight. They are classified under tariff item 4411.94.00 as low-density fiberboard, enabling easy handling during door assembly.
4411.94.00MDF Insulation Board 6mm
Medium-density fibreboard with a density of 0.45 g/cm³, made from wood fibres bonded with resins for sound and thermal insulation. It falls under tariff item 4411.94.00 as fibreboard of density not exceeding 0.5 g/cm³.
4411.94.00Medium Density Fiberboard (MDF) 12mm Thick Panels
Standard medium-density fibreboard panels with density between 0.35-0.5 g/cm³, made from wood fibres bonded with resins, supplied in large sheets for further processing. They fall under tariff item 4411.94.00.
4411.94.00Medium Density Fiberboard Underlayment Sheets
Medium-density fiberboard underlayment sheets are MDF sheets with a density of 0.35–0.5 g/cm³ used as flooring underlayment, produced by bonding wood fibers with resins under heat and pressure. They fall under tariff item 4411.94.00 as low-density fiberboard, ideal for leveling floors before final flooring installation.
4411.94.00Mixed Hardwood MDF Substrate 9mm
9mm fibreboard panels from mixed hardwood fibres (oak, birch), density 0.38 g/cm³, with no surface treatment or machining. They fall under tariff item 4411.94.00 as fibreboard of density not exceeding 0.5 g/cm³.
4411.94.00Pine Fiberboard Insulation Panels 15mm
Low-medium density fibreboard (0.45 g/cm³) produced from pine wood waste fibres, bonded with minimal resins, left rough and unsurfaced. It falls under tariff item 4411.94.00.
4411.94.00Poplar MDF Core Stock 18mm Sheets
Fibreboard sheets made primarily from poplar wood fibres, density 0.4 g/cm³, untreated and not mechanically processed beyond basic forming. They fall under tariff item 4411.94.00.
4411.94.00Recycled Wood Fiberboard 20mm Thick
Recycled wood fiberboard panels, 20 mm thick, manufactured from 100% recycled wood fibers with a density of 0.42 g/cm³, are supplied raw without surface coverings. These panels are not mechanically worked, fitting tariff item 4411.94.00 as low-density fiberboard. They are used in various construction and furniture applications.
4411.94.00Softboard Ceiling Tile 15mm
Soft fibreboard at 0.35 g/cm³ for acoustic ceiling tiles, bonded with organic substances. This low-density fibreboard falls under tariff item 4411.94.00, as its density does not exceed 0.5 g/cm³.
4411.94.00Strawboard Insulation Panel 20mm
Strawboard insulation panels made from straw (a ligneous material) at 0.43 g/cm³ for agricultural building insulation. Per Chapter 44 note 6, straw is treated as wood, so it falls under tariff item 4411.94.00.
4411.94.00Waterproof Bitumen Fiberboard Subfloor Panels
Waterproof bitumen fiberboard subfloor panels are medium-density fiberboard (0.35–0.5 g/cm³) impregnated with bitumen to resist moisture in subflooring applications. They are classified under tariff item 4411.94.00 as low-density fiberboard, providing a durable and water-resistant base for flooring.
4411.94.00Water-Resistant Bitumen Fiberboard Insulation Boards
Water-resistant bitumen fiberboard insulation boards, impregnated with bitumen for humidity resistance, have a density exceeding 0.35 but not exceeding 0.5 g/cm³. These boards are not mechanically worked or surface-covered, fitting tariff item 4411.94.00. They are used for thermal and acoustic insulation in buildings.
4411.94.00Wood Fiber Insulation Board 10mm
Rigid insulation board from compressed wood fibres at 0.40 g/cm³, used in green building for thermal insulation. It falls under tariff item 4411.94.00 as fibreboard of density not exceeding 0.5 g/cm³.