Rough HDF Underscore Panel
> Unprocessed high-density fiberboard panels used as substrate under flooring or countertops, with a density exceeding 0.8 g/cm³. The panels are strictly not mechanically worked or coated, serving as raw material for further manufacturing. This product falls under tariff item 4411.92.10 as it is resin-impregnated with phenol-formaldehyde resin for use in manufacturing overlaid plywood or particle board.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the resin content is below 17% or the end-use is not for overlaid plywood or particle board.
Other high-density fiberboards without the specified resin or use are classified here.
If the density is 0.8 g/cm³ or less.
Lower-density fiberboards with resin impregnation fall under a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• > Verify the resin is phenol-formaldehyde and at least 17% by weight
• The panels must be for use in manufacturing overlaid plywood or particle board; maintain end-use documentation
• Ensure no mechanical working or surface covering has been applied
Related Products under Tariff item 4411.92.10
Bagasse HDF Raw Sheet
> A high-density fiberboard sheet manufactured from sugarcane bagasse, a ligneous material of woody nature, with a density exceeding 0.8 g/cm³. The board is supplied in rough form without any mechanical working or surface covering, making it suitable for further industrial processing. This product falls under tariff item 4411.92.10 as it is a fiberboard of other ligneous materials, resin-impregnated with phenol-formaldehyde resin for use in manufacturing overlaid plywood or particle board.
High-Density Fiberboard (HDF) Panel 1220x2440mm
> High-density fiberboard made from wood fibers bonded with resins, with a density exceeding 0.8 g/cm³, used for furniture and cabinetry cores. The board lacks surface covering except for possible oil treatment, and is not mechanically worked. This product falls under tariff item 4411.92.10 as it is resin-impregnated with phenol-formaldehyde resin for use in manufacturing overlaid plywood or particle board.
High-Density Fiberboard (HDF) Raw Panel
> A raw high-density fiberboard panel made from wood fibers bonded with synthetic resins, with a density exceeding 0.8 g/cm³. The panel is not mechanically worked beyond basic formation and has no surface covering, making it an intermediate product for further processing. This product qualifies under tariff item 4411.92.10 because it is resin-impregnated with phenol-formaldehyde resin and intended for use in manufacturing overlaid plywood or particle board.
Industrial HDF Backing Board
> Industrial high-density fiberboard backing panels with a density exceeding 0.8 g/cm³, supplied rough and free of mechanical working or coatings. These panels are used as backing in cabinetry and shelving, but are not yet finished for final use. This product falls under tariff item 4411.92.10 as it is resin-impregnated with phenol-formaldehyde resin for manufacturing overlaid plywood or particle board.
Plain HDF Slab for Lamination
> Unfinished high-density fiberboard slabs prepared for subsequent lamination in panel processing, with a density exceeding 0.8 g/cm³. The slabs have no surface treatment or mechanical finishing, making them suitable for further industrial application. This product qualifies under tariff item 4411.92.10 because it is resin-impregnated with phenol-formaldehyde resin for use in manufacturing overlaid plywood or particle board.
Raw Bamboo High-Density Fiberboard
> High-density fiberboard manufactured from bamboo fibers, with a density exceeding 0.8 g/cm³, supplied in rough, unworked form without surface coverings. Bamboo is considered a woody material under Chapter 44 notes, so this product is classified as a fiberboard of wood. It falls under tariff item 4411.92.10 as it is resin-impregnated with phenol-formaldehyde resin for use in manufacturing overlaid plywood or particle board.