Other
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. > Non-coniferous: > Other > Of a thickness exceeding 5 mm but not exceeding 9 mm > Other
Duty Rate (from China)
Products classified under Tariff item 4411.13.00.90
9mm Raw MDF Sheet 4x8
A standard 9mm thick MDF panel measuring 4 feet by 8 feet, made from wood fibers bonded with resins, with only possible oil treatment and no surface covering. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state.
4411.13.009mm Thick Raw MDF Sheet
A raw medium density fiberboard (MDF) sheet measuring 9mm thick, made from wood fibers bonded with resins, without any surface covering or mechanical working. This product falls under tariff item 4411.13.00 as it is a non-coniferous MDF sheet with a thickness exceeding 5mm but not exceeding 9mm, and is in an unprocessed state.
4411.13.00Bulk Raw MDF Panels 9mm for Furniture
Bulk 9mm raw MDF panels shipped for furniture frame construction, without decorative surfaces applied. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state suitable for core material.
4411.13.00E1 Emission Raw MDF 6mm Sheet
A 6mm thick raw MDF panel with E1 low-formaldehyde emission compliance, pressed without mechanical finishing or surface coverings. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, suitable for interior applications.
4411.13.00Economic Raw MDF Sheet 8x4 Feet 6mm
An affordable 6mm raw MDF sheet in 4x8 foot size for general construction and displays, without surface coverings. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state.
4411.13.00Industrial Grade 7mm Raw MDF
A 7mm thick industrial-grade raw MDF sheet designed for lamination, without trimmed edges or coated surfaces. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in an unworked condition for further processing.
4411.13.00Industrial Raw MDF 6mm Thickness
A 6mm industrial-grade raw MDF sheet for millwork and patterning, with only an oiled surface. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state without surface covering.
4411.13.00Moisture-Resistant Raw MDF 5.2mm
A 5.2mm raw MDF sheet with moisture-resistant resins, unfinished surface for wet-area applications. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state.
4411.13.00Moisture-Resistant Raw MDF 8mm
An 8mm thick moisture-resistant raw MDF sheet with added wax for basic humidity resistance, supplied without surface work or coverings. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw pressed state.
4411.13.00Oiled Raw MDF for Millwork 7.5mm
A 7.5mm MDF sheet with light oil treatment to prevent handling stains, raw for millwork profiling. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, as oil treatment does not constitute a surface covering.
4411.13.00Plain 3/8-inch MDF Panel
An unfinished 9mm MDF panel used in construction and shelving, composed of lignocellulosic fibers agglomerated with resins. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state.
4411.13.00Raw MDF Board for Cabinetry 8mm Thick
An 8mm thick raw MDF board specifically sized for kitchen cabinet carcasses, not painted or laminated. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in a raw state.
4411.13.00Standard 5.5mm Raw MDF Board
A 5.5mm thick entry-level raw MDF board in large format sheets, completely unworked without surface treatments. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, suitable for lightweight applications.
4411.13.00Standard MDF Shelf Board 5.5mm
A 5.5mm MDF panel cut to shelf dimensions, raw finish suitable for bookcases and retail fixtures. This product falls under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, without surface treatments.
4411.13.00Unfinished 1220x2440mm MDF Panel
A standard 9mm MDF board in 4x8 foot size, raw and unsanded from the factory, without surface coverings. This product is classified under tariff item 4411.13.00 as a non-coniferous MDF sheet with thickness exceeding 5mm but not exceeding 9mm, in an unprocessed condition.