Urea-Formaldehyde Bonded MDF Wall Liner
Rabbeted-edge MDF sheets, not exceeding 5 mm in thickness, bonded throughout with urea-formaldehyde synthetic resins for use as subwall lining in renovations. These sheets offer a smooth, paintable surface and are designed to be installed over existing walls. They are classified under tariff item 4411.12.00 as MDF of a thickness not exceeding 5 mm, with the urea-formaldehyde resin acting as a binder in the fibreboard manufacturing process.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness exceeds 5 mm but does not exceed 9 mm
MDF subheading is based on thickness.
If the sheets are surface-covered with paper or textile
Wall coverings of paper are classified in Chapter 48.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the sheets are not pre-finished with wallpaper or other coverings, which may reclassify them
• Document the resin type and fibreboard composition for CBSA
• Verify that the rabbeted edges are for installation purposes and do not constitute further manufacture into articles of heading 44.18
Related Products under Tariff item 4411.12.00
12mm Baltic Birch MDF Panel
A 12mm thick medium density fiberboard panel made from birch wood fibers, with only minimal oil treatment to prevent moisture absorption. Although thicker than 5mm, this candidate is incorrectly listed; it does not belong under tariff item 4411.12.00, which is limited to MDF not exceeding 5mm thickness.
2.5mm Acacia MDF Sheet
An ultra-thin 2.5mm MDF sheet from acacia wood fibers, oil-treated solely for handling, ideal for model-making and crafts. Its thickness under 5mm and lack of surface covering qualify it under tariff item 4411.12.00.
3mm MDF Speaker Baffle Boards
Thin medium density fiberboard sheets at 3mm thickness cut to size for use as speaker cabinet baffles in audio equipment enclosures. Although cut to size, they remain unworked and fall under tariff item 4411.12.00 as MDF not exceeding 5mm thickness.
3mm Poplar MDF Sheet
A thin medium density fiberboard sheet from poplar wood fibers, exactly 3mm thick, oil-treated for handling stability but otherwise bare. Its thin, uncovered nature places it under tariff item 4411.12.00.
4mm Eucalyptus MDF Panel
An eucalyptus-sourced medium density fiberboard panel, 4mm thick, untreated beyond light oil application for anti-stick properties. Its thin profile and uncovered surface qualify it under tariff item 4411.12.00.
5mm Pine MDF Board
A medium density fiberboard board sourced from pine wood, 5mm thick maximum, featuring only oil treatment for surface protection without additional coverings. Its thickness and unworked state place it under tariff item 4411.12.00.