Mahogany, American
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. > Of tropical wood: > Other > Mahogany, American
Duty Rate (from China)
Products classified under Tariff item 4408.39.00.20
Acajou d'Afrique Peeled Veneer for Furniture
Peeled veneer sheets from Khaya spp. (African mahogany), thickness under 6 mm, planed for furniture facing and restoration projects. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, not exceeding 6 mm, planed.
4408.39.00African Mahogany Architectural Veneer
Sliced and sanded Acajou d'Afrique veneer sheets ≤6 mm for architectural millwork and wall paneling systems, end-jointed for large seamless panels. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet, end-jointed, not exceeding 6 mm.
4408.39.00African Mahogany End-Jointed Veneer Panels
End-jointed sheets of Acajou d'Afrique veneer, sliced lengthwise to ≤6 mm thickness, sanded for smooth lamination in plywood manufacturing. Used primarily for interior paneling and decorative applications. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, end-jointed, not exceeding 6 mm.
4408.39.00African Mahogany Spliced Veneer Backing
Spliced sheets of Acajou d'Afrique veneer, not exceeding 6 mm thickness, used as backing material for marquetry and inlaid woodwork. Prepared through slicing and finger-jointing for stability. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00African Mahogany Veneer Sheets
Thin sheets of Acajou d'Afrique (Khaya spp.), sliced to a thickness not exceeding 6 mm, used for veneering furniture and cabinetry. These sheets are typically sanded and end-jointed for seamless application in plywood or laminates. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, end-jointed, not exceeding 6 mm.
4408.39.00Andiroba Veneer Sheets
Thin veneer sheets of Andiroba (Carapa guianensis), a tropical hardwood from the Amazon, sliced to a thickness not exceeding 6 mm. These sheets are used for veneering in boat building and other applications requiring durable, oily wood.
4408.39.00Anigre Figured Veneer Backing Sheets
High-figure Anigre veneer sheets, sliced thin at 0.5 mm for decorative backing in laminated panels and marquetry. Tropical Aningeria spp. grain enhances contrast. This product meets the criteria for tariff item 4408.39.00 as other tropical wood veneer.
4408.39.00Anigre Veneer for Boat Interior Trim
Marine-grade sanded Anigre veneer sheets ≤6 mm thick, end-jointed for yacht interior paneling and trim. Tropical Aningeria provides durable, light-colored finish. This product is classified under 4408.39.00 as other tropical wood veneer.
4408.39.00Anigre Veneer Sheets for Cabinetry
Thin Anigre (Aningeria spp.) wood veneer sheets, sliced to a thickness not exceeding 6 mm, planed and sanded for smooth application. Used primarily for high-end cabinet doors and furniture surfaces. This product is classified under 4408.39.00 as other tropical wood veneer.
4408.39.00Balau Veneer Sheets
Balau (Shorea spp.) veneer sheets from Southeast Asia, sliced thinly to ≤6 mm for decking and cladding applications. The tropical hardwood is known for its durability and is used in exterior veneering.
4408.39.00Book-Matched Anigre Veneer for Wall Panels
Book-matched sliced Anigre veneer sheets, sanded and under 6 mm thick, creating symmetrical grain patterns for interior wall cladding. Derived from tropical Aningeria trees. This product precisely matches tariff item 4408.39.00 for other tropical wood veneer.
4408.39.00Cumaru Veneer Sheets
Cumaru (Dipteryx odorata) veneer sheets, a Brazilian tropical hardwood, sliced to ≤6 mm for flooring and heavy-duty paneling. The wood is planed for lamination and has a highly durable, oily texture.
4408.39.00End-Jointed Anigre Veneer Panels
Spliced and end-jointed Anigre (Aningeria spp.) veneer sheets, sliced lengthwise not exceeding 6 mm thick, for seamless large-panel applications in furniture. Processed for uniformity while retaining natural grain. This product is classified under 4408.39.00 as other tropical wood veneer.
4408.39.00End-Jointed Ipe Veneer for Flooring Underlay
End-jointed Ipe (Tabebuia spp.) tropical hardwood veneers, sliced precisely to 4 mm thickness, used as underlay for engineered flooring. The end-jointing allows for extended-length sheets suitable for lamination. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, not exceeding 6 mm, that has been joined.
4408.39.00End-Jointed Keruing Tropical Veneer
End-jointed Keruing (Dipterocarpus spp.) tropical veneers, 3 mm thick, used for commercial plywood and formwork sheathing. The end-jointing creates longer sheets for lamination. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet not exceeding 6 mm, joined for veneering purposes.
4408.39.00End-Jointed Okoume Veneer Panels
End-jointed Okoume tropical veneers, sliced to 6 mm or less, used for plywood core and decorative facing in marine plywood. The end-jointing extends sheet length for lamination. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, joined, not exceeding 6 mm in thickness.
4408.39.00End-Jointed Sapele Veneer for Cabinetry
Premium sapele mahogany tropical veneers, end-jointed for continuous grain in kitchen cabinets and fine joinery, sliced to 0.6 mm thickness. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet, end-jointed, not exceeding 6 mm.
4408.39.00Goncalo Alves Veneer
Goncalo Alves (Astronium spp.) veneer from Brazil, peeled into ≤6 mm sheets for musical instruments, gunstocks, and high-end cabinetry. The wood features dramatic grain patterns and may be sanded but not otherwise processed.
4408.39.00Iroko Veneer for Plywood
Iroko (Milicia excelsa) veneer from Africa, peeled into thin sheets ≤6 mm for core or face veneers in marine plywood and exterior paneling. The wood is a durable tropical alternative to teak and may be sanded or spliced.
4408.39.00Jatoba Veneer for Cabinetry
Jatoba (Hymenaea courbaril) veneer from Brazil, peeled into ≤6 mm sheets for kitchen cabinets and interior trim. The cherry-like tropical wood is often end-jointed for bookmatched patterns.
4408.39.00Kempas Tropical Veneer
Kempas (Koompassia malaccensis) veneer from Malaysia, sliced to ≤6 mm for structural plywood and shopfitting. The red hardwood is sanded for glue adhesion.
4408.39.00Khaya Mahogany Veneer Sheets
Khaya mahogany (African mahogany) veneer sheets, sliced to a thickness not exceeding 6 mm for furniture and cabinetry veneering. The sheets are typically planed and sanded for smooth application.
4408.39.00Khaya Spp. Planed Veneer for Boat Interior
Planed veneer sheets from African mahogany (Khaya spp.), sliced to under 6 mm for marine interior paneling and trim. The sanded finish ensures smooth lamination onto curved surfaces. This product falls under tariff item 4408.39.00 as it is a tropical wood veneer, not elsewhere specified.
4408.39.00Khaya Spp. Sliced Veneer for Cabinetry
Sliced African mahogany (Khaya spp.) veneer sheets, planed and sanded, not exceeding 6 mm thick, ideal for high-end kitchen cabinets. These sheets are sourced from sustainable tropical forests and prepared for lamination. They are classified under 4408.39.00 as other tropical wood veneers.
4408.39.00Kosso Tropical Veneer
Kosso (Pterocarpus erinaceus) veneer, a rosewood relative from Africa, sliced thin for decorative panels. The tropical wood is used in high-end veneering applications.
4408.39.00Large Format Anigre Spliced Veneer
Spliced large-format Anigre (Aningeria spp.) veneer panels, peeled and planed to 4 mm thickness for architectural millwork and doors. Seamless joints enable wide coverage. This product is classified under 4408.39.00 as other tropical wood veneer.
4408.39.00Merbau Engineered Veneer
Merbau (Intsia bijuga) veneer from Indonesia, sliced to ≤6 mm for veneering applications. The dark tropical hardwood is sometimes lightly engineered but remains raw for veneering.
4408.39.00Padouk Veneer Panels
Padouk (Pterocarpus macrocarpus) veneer from Burma, sliced to ≤6 mm for boatbuilding, decking, and outdoor furniture. The vibrant red tropical hardwood is often spliced into wider panels.
4408.39.00Planed Anigre Veneer for Speaker Cabinets
Planed Anigre veneer sheets not exceeding 6 mm, sourced from Aningeria spp., for premium audio speaker enclosure facing. Provides acoustic-friendly light wood tone. This product is classified under 4408.39.00 as other tropical wood veneer.
4408.39.00Sanded Khaya Veneer for Musical Instruments
Sanded African mahogany veneer sheets ≤6 mm thick, sliced for use in guitar bodies, piano cases, and other musical instrument veneering. Khaya spp. provides the rich tonewood qualities sought by luthiers. This product is classified under 4408.39.00 as other tropical wood veneer.
4408.39.00Sapele Veneer Sheets
Sapele (Entandrophragma cylindricum) veneer from West Africa, sliced into thin sheets ≤6 mm for high-end veneering in doors, flooring, and musical instruments. The reddish tropical hardwood is often end-jointed or spliced.
4408.39.00Spliced Balau Veneer Panels
Spliced Balau (Shorea spp.) tropical veneers, 2.5 mm thick, used for exterior siding underlay and deck overlays. The splicing joins sheets edge-to-edge for wider panels. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00Spliced Khaya Mahogany Veneer Sheets
Thin veneer sheets (under 6 mm) of tropical Khaya mahogany, spliced edge-to-edge for seamless large panels in high-end furniture and cabinetry. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00Spliced Mahogany Face Veneer for Doors
Genuine Swietenia macrophylla mahogany tropical face veneers, spliced for custom entry doors and millwork, sliced to 1.5 mm thickness. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00Spliced Meranti Veneer Sheets for Plywood
Dark red meranti tropical hardwood veneers, sliced thin (≤6 mm), spliced for uniform width in exterior plywood manufacturing and furniture overlays. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00Spliced Teak Veneer Sheets 0.5mm Thick
Quarter-sawn plantation teak (Tectona grandis) tropical veneers, spliced for yacht interiors and luxury furniture, ultra-thin at 0.5 mm. This product falls under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00Spliced Tropical Lauan Veneer Sheets
Lauan (Shorea spp.) tropical veneers, spliced edge-to-edge, ≤6 mm thick for interior plywood doors and paneling in humid environments. This product is classified under tariff item 4408.39.00 as a tropical wood veneer sheet, spliced, not exceeding 6 mm.
4408.39.00Tali Veneer for Furniture
Tali (Erythrophleum suaveolens) veneer from Africa, sliced to ≤6 mm for furniture and upholstery frames. The hard tropical wood is used in structural veneering applications.
4408.39.00Tauari Sliced Veneer
Tauari (Couratari spp.) veneer from Brazil, peeled to ≤6 mm for interior plywood faces. The light tropical hardwood is used in veneering applications.
4408.39.00Wenge Veneer Sheets
Wenge (Millettia laurentii) veneer from Congo, sliced thinly to ≤6 mm for luxury furniture and architectural millwork. The dark striped tropical hardwood is often planed for smooth surfaces.