New

Ask Wove anything about tariffs.

Try Tariff Assistant

Teak Flitch Bundles

Bundled teak logs prepared for sawing, bark-free with minimal sapwood removal, in rough unsawn form. These flitches are classified as teak wood in the rough, essential for high-grade veneer and furniture production.

Import Duty Rates by Country of Origin

Origin CountryMFN TariffSurtaxesTotal Effective Rate
πŸ‡¨πŸ‡³ChinaFreeβ€”Free
πŸ‡²πŸ‡½MexicoFreeβ€”Free
πŸ‡ΊπŸ‡ΈUnited StatesFreeβ€”Free
πŸ‡©πŸ‡ͺGermanyFreeβ€”Free
πŸ‡―πŸ‡΅JapanFreeβ€”Free

More Specific Codes

This product may fall under a more specific subheading:

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4407.29.00Same rate: Free

If flitches are sawn into boards or veneer sheets

Sawn wood or veneer is classified under heading 44.07 or 44.08.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item β€” and can price the duty on it in the same conversation.

Import Tips & Compliance

β€’ Ensure flitches are not sawn or sliced, as that would change classification

β€’ Provide a detailed description of the wood's rough state and species

β€’ Comply with CBSA requirements for wood packaging material if applicable

Related Products under Tariff item 4403.42.00

Bark-Free Teak Sawlogs

Bark-free teak sawlogs in the rough, unprocessed state, sourced from tropical teak trees. These logs are sorted for milling and serve as primary material for dimension lumber and specialty cuts, falling under tariff item 4403.42.00 as teak wood in the rough.

Debarked Teak Rounds

Debarked teak rounds with a cylindrical cross-section, untreated and in rough condition, retaining sapwood. These logs match the tariff item as teak wood in the rough, not stripped of sapwood, and are commonly used for further processing.

Heavy Teak Rough Timbers

Oversized teak timbers in rough cut form for structural use, stripped of bark but unsawn precisely. These timbers are classified as teak wood in the rough, roughly squared, and are intended for bridge and dock construction.

Rough Squared Teak Blocks

Teak wood blocks roughly squared on all four sides from debarked logs, retaining a natural rough surface. These blocks are covered by the tariff item as teak roughly squared, not fully machined, and are used for carving and turning.

Rough Teak Cant Blocks

Rough teak cants hewn from logs, squared on opposite faces but irregular on sides, bark-free. These cants are classified as roughly squared teak wood in the rough, used for beam stock and resawing into boards.

Rough Teak Figured Logs

Premium teak logs with figured grain patterns, bark stripped and roughly prepared. These logs are classified as teak wood in the rough for veneer production, highly sought after for architectural paneling.