Douglas-Fir Construction Logs
Rough-cut Douglas-fir logs with bark removed and a smallest cross-sectional dimension exceeding 15 cm, sourced from Pacific Northwest forests. These logs are in the rough state, not treated beyond stripping bark or sapwood, and are classifiable as coniferous wood in the rough under tariff item 4403.25.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the logs are treated with paint, stain, creosote or other preservatives
Treated wood in the rough is classified separately from untreated rough wood.
If the logs have been sawn lengthwise or chipped, creating lumber or other processed wood
Sawn or chipped wood falls under heading 44.07, not wood in the rough.
If the logs are reduced to chips or particles
Wood in chips or particles is classified under heading 44.01, not as rough wood.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the smallest cross-sectional dimension is at least 15 cm to qualify for this tariff item
• Have documentation proving the wood is in the rough state (not further worked) and the species is coniferous
• Verify whether a permit is required under the Wild Animal and Plant Protection and Regulation of International and Interprovincial Trade Act (WAPPRIITA) if the logs are from a regulated species
Related Products under Tariff item 4403.25.00
Bark-Stripped Lodgepole Pine Timbers 16x30 cm
Large lodgepole pine coniferous timbers in rough form, stripped of bark and sapwood, with a minimum cross-sectional dimension of 16 cm. These timbers are intended for heavy-duty applications such as mine timbers and utility poles, and are not further processed beyond rough squaring.
Douglas Fir Electrical Transmission Poles
Coniferous Douglas fir poles in the rough, stripped of bark, with cross-sections over 15 cm, designed for high-voltage electrical power lines and telegraph supports. These poles are not further processed beyond rough squaring.
Douglas-Fir Export Grade Utility Logs
Rough Douglas-fir logs graded for utility purposes such as pulpwood or particleboard feedstock, stripped of sapwood and with a smallest cross-sectional dimension of 15 cm or more. These logs are in the rough state and are classifiable as coniferous wood in the rough under tariff item 4403.25.00.
Douglas-Fir Heavy Timbers Rough
Unprocessed heavy Douglas-fir timbers for bridge or dock construction, roughly squared and exceeding 15 cm in minimum cross-section. These timbers are in the rough state, not further worked beyond roughly squaring, and are classifiable as coniferous wood in the rough under tariff item 4403.25.00.
Douglas-Fir Peeler Logs Premium
Premium quality straight Douglas-fir peeler logs, debarked with large cross-sections of 15 cm or more, intended for high-yield veneer production. These logs are in the rough state and are classifiable as coniferous wood in the rough under tariff item 4403.25.00.
Douglas-Fir Pulp Logs Bulk
Bulk shipment Douglas-fir pulp logs in rough condition, with sapwood stripped and a minimum cross-sectional dimension of 15 cm, intended for chemical pulp mills. These logs are in the rough state and are classifiable as coniferous wood in the rough under tariff item 4403.25.00.