Brake hoses, for the vehicles of subheading 8701.21 to 8701.29 or heading 87.02, 87.03, 87.04 or 87.05
Tubes, pipes and hoses, of vulcanized rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges). > Reinforced or otherwise combined with other materials: > With fittings > Brake hoses, for the vehicles of subheading 8701.21 to 8701.29 or heading 87.02, 87.03, 87.04 or 87.05
Duty Rate (from China)
Products classified under Tariff item 4009.42.00.10
Automotive Brake Hose with Stainless Steel End Fittings
This is an automotive brake hose made of vulcanized rubber, reinforced with braided stainless steel mesh, and fitted with banjo bolt and flare fittings. It is classified under tariff item 4009.42.00 because it is a tube, pipe, or hose of vulcanized rubber that is reinforced with other materials and comes with fittings.
4009.42.00Chemical Transfer Hose with Camlock Fittings
This is a chemical transfer hose made of vulcanized EPDM rubber, reinforced with wire braid, and fitted with polypropylene camlock couplings and PTFE-lined ends. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings, designed for corrosive chemical handling.
4009.42.00Cryogenic Hose with Stainless Swivel Fittings
This is a cryogenic hose made of vulcanized rubber, reinforced with stainless steel braid, and fitted with bayonet and swivel fittings for LNG/LN2 service. It is classified under tariff item 4009.42.00 because it is a reinforced rubber hose with fittings for extreme-temperature applications.
4009.42.00Food-Grade Silicone Hose with Tri-Clamp Fittings
This is a food-grade silicone hose made of vulcanized rubber, reinforced with fiberglass braid, and fitted with 316 stainless steel tri-clamp sanitary fittings. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings for dairy and pharmaceutical transfer.
4009.42.00Fuel Dispensing Hose with NPT Threaded Fittings
This is a fuel dispensing hose made of nitrile rubber, reinforced with textile and steel wire, and fitted with aluminum NPT swivel fittings for gasoline and diesel transfer. It is classified under tariff item 4009.42.00 as a reinforced rubber hose with fittings for fuel dispensing.
4009.42.00Garden Water Hose with Brass Nozzle and Fittings
This is a garden water hose made of vulcanized rubber, reinforced with textile mesh, and fitted with brass swivel fittings, an elbow connector, and a spray nozzle. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings for residential irrigation.
4009.42.00High-Pressure Washer Hose with Quick-Couple Fittings
This is a high-pressure washer hose made of vulcanized rubber, reinforced with polyester braid and steel mesh, and fitted with M22 quick-couple fittings. It is classified under tariff item 4009.42.00 as a reinforced rubber hose with fittings for power washing equipment.
4009.42.00HVAC Refrigerant Hose with Flare Fittings
This is an HVAC refrigerant hose made of vulcanized rubber, reinforced with nylon braid, and fitted with SAE 45-degree flare fittings for R134a refrigerant lines. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings for air conditioning systems.
4009.42.00Industrial Air Hose with Quick-Connect Couplings
This is an industrial air hose made of vulcanized rubber, reinforced with polyester cord and steel helix wire, and fitted with brass quick-disconnect fittings and safety sleeves. It is classified under tariff item 4009.42.00 as a reinforced rubber hose with fittings for pneumatic applications.
4009.42.00Marine Bilge Pump Hose with Barbed Fittings
This is a marine bilge pump hose made of vulcanized rubber, reinforced with polyester mesh and wire helix, and fitted with nylon barbed elbow fittings. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings for boat bilge pump discharge.
4009.42.00Reinforced Rubber Hydraulic Hose with Brass Fittings
This is a reinforced rubber hydraulic hose with brass fittings, made of vulcanized rubber reinforced with textile braiding and steel wire helix, equipped with reusable brass JIC fittings. It is classified under tariff item 4009.42.00 as a reinforced rubber hose with fittings for high-pressure hydraulic systems.
4009.42.00Sandblasting Hose with Malleable Iron Couplings
This is a sandblasting hose made of vulcanized SBR rubber, reinforced with textile plies and steel wire, and fitted with 1-1/2 inch malleable iron universal couplings. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings for abrasive blasting applications.
4009.42.00Steam Hose with Carbon Steel Flanges
This is a steam hose made of EPDM rubber, reinforced with wire braid and textile, and fitted with ANSI carbon steel flanges for saturated steam service up to 250 psi. It is classified under tariff item 4009.42.00 as a reinforced rubber hose with fittings for steam applications.
4009.42.00Vacuum Cleaner Hose with Plastic Cuff Fittings
This is a vacuum cleaner hose made of vulcanized rubber, reinforced with steel spring helix and textile, and fitted with ABS plastic end cuffs and wand adapters. It falls under tariff item 4009.42.00 as a reinforced rubber hose with fittings for vacuum applications.
4009.42.00Welding Gas Hose with B-Fitting Connectors
This is a welding gas hose made of vulcanized rubber grade RMA, reinforced with textile braid, and fitted with brass B-size fittings for oxy-acetylene welding torches. It is classified under tariff item 4009.42.00 as a reinforced rubber hose with fittings for welding applications.