PS Foam Profile Extrusion Waste
PS foam profile extrusion waste includes start-up scrap and edge trims from polystyrene foam profile extrusion for crown molding and picture frames. This material qualifies as styrene scrap under tariff item 3915.20.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags
No agency flag on this HTS number in the CBSA Single Window matching criteria.
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the waste contains other polymers or additives above 5% by weight
Mixed polymer waste is classified under other plastic scrap headings.
If the profiles are finished and not waste
Finished polystyrene profiles are classified under monofilament and profile shapes.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Keep the waste separate from other extrusion materials to maintain classification integrity
• Provide CBSA with details on the extrusion process and polymer composition
• Verify that the waste is not contaminated with release agents or other processing chemicals
Related Products under Tariff item 3915.20.00
ABS Plastic Manufacturing Scrap
ABS plastic manufacturing scrap consists of parings and waste from acrylonitrile-butadiene-styrene copolymer production, where styrene monomer units exceed 95% by weight of the total polymer content. This material arises from injection molding operations and is classified under tariff item 3915.20.00 as waste, parings, and scrap of polymers of styrene.
Crystal Polystyrene (GPPS) Sheet Scrap
Parings and scrap from general purpose polystyrene (GPPS) sheet production, used for CD cases and signage. This material is pure polystyrene with 100% styrene monomers, qualifying as waste, parings and scrap of polymers of styrene under tariff item 3915.20.00.
Expanded Polystyrene (EPS) Packaging Waste
Expanded polystyrene packaging waste is post-industrial scrap from EPS foam blocks used in electronics packaging. This material consists of polystyrene polymer scrap and is classified under tariff item 3915.20.00 when the styrene content meets Chapter 39 criteria.
General Purpose PS Pellet Plant Purge
Purge material from GPPS pellet manufacturing lines, consisting of off-spec polystyrene that is not usable as finished product. This material is classified as waste, parings and scrap of polymers of styrene under tariff item 3915.20.00.
High-Impact Polystyrene (HIPS) Trimmings
High-impact polystyrene trimmings are trimmed edges and parings from HIPS sheet extrusion used in refrigerator linings and packaging. This material consists of polystyrene modified with polybutadiene but retains 95% or more styrene units by weight, falling under tariff item 3915.20.00 as styrene polymer scrap.
HIPS TV Cabinet Molding Scrap
HIPS TV cabinet molding scrap consists of oversized parings from high-impact polystyrene injection molds for television and monitor cabinets. The styrene polymer is dominant per Chapter 39 notes, qualifying this waste for tariff item 3915.20.00.