Tongkun Group PET Polymer TK118
Tongkun Group PET Polymer TK118 is a low-viscosity poly(ethylene terephthalate) resin in pellet form, intended for thin film and sheet extrusion. Because it is not specifically designated for packaging film or other narrower uses, it is classified under tariff item 3907.69.00 as 'Other' poly(ethylene terephthalate) in primary forms.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the intrinsic viscosity is 0.7 dl/g or higher
This subheading specifically covers high-viscosity PET, which is commonly used for beverage bottles.
If the product is imported as film or sheet rather than pellets
Once the PET is extruded into film or sheet, it is classified under heading 39.20, not as a primary form.
If the material is a polyester other than PET
This covers other polyesters in primary forms, such as polytrimethylene terephthalate or polybutylene terephthalate.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the intrinsic viscosity of the PET to ensure it does not fall under a more specific subheading such as 3907.61.00
• Provide a certificate of analysis or product datasheet to CBSA to substantiate the polymer's properties and primary form
• Check if the exporter is eligible for preferential tariff treatment under a free trade agreement to lower the applicable duty
Related Products under Tariff item 3907.69.00
Alpek PET Resin ER271F
Alpek PET Resin ER271F is a standard polyethylene terephthalate pellet for general extrusion into profiles and tubes, offering consistent melt flow and mechanical properties. It is designed for applications beyond packaging, such as industrial profiles and tubing, where dimensional stability and chemical resistance are required. It is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Amorphous PET Pellets for Strapping
Amorphous PET pellets with medium intrinsic viscosity (75 ml/g), used for extrusion into polyester strapping. The pellets are in primary form and consist of poly(ethylene terephthalate), classified under the 'Other' tariff item.
Biaxially Oriented PET (BOPET) Base Resin
Biaxially Oriented PET (BOPET) base resin in primary pellet form, used to produce biaxially oriented films for packaging and labels. The resin is unmodified PET with terephthalate monomer units exceeding 95% by weight, falling under the 'Other' tariff item for poly(ethylene terephthalate) in primary forms.
Blow Molding Grade PET Chips
High-clarity PET chips with intrinsic viscosity 72-77 ml/g, designed for stretch blow molding of PET water and soda bottles. The chips are in primary form and consist of poly(ethylene terephthalate), falling under the 'Other' tariff item.
Carbonated Soft Drink PET IV 74
PET resin with intrinsic viscosity 74 ml/g, specifically formulated for 2L carbonated soft drink bottles with CO2 retention. The resin contains nucleating agents for consistent crystallinity, but the base polymer is PET in primary form, classified under the 'Other' tariff item.
Clear Bottle Grade PET Resin
High-clarity PET resin pellets with intrinsic viscosity 71-76 ml/g, optimized for sparkling clear single-serve beverage bottles. The resin is in primary form and consists of poly(ethylene terephthalate), falling under the 'Other' tariff item.